www.osram.com SUPERSTAR CLASSIC B25 ADVANCED FROSTED Replacement for 25W incandescent lamp Dimension comparable Classic B incandescent High quality of light with CRI 80 Good thermal management Dimmable Product Offering Type reference Power Classic B25 adv frosted E14 4,5W 1. Key Features and Benefits • 4,5W LED lamp as high-quality replacement of 25W incandescent lamp • E14 base • Dimmable1 • 2700K warm white • reduces energy consumption up to 80% • robust against vibrations • 25,000 hours lifetime • UV and NIR radiation free • Mercury free • 4 years Osram Guarantee2 1 2 See www.osram.com/dim See www.osram.com/guarantee GL MK, Edition July 2012 subject to alteration 1 CCT 2700K Luminous flux 250 CRI 80 2. Common Characteristics Average Luminous lifetime4 Flux 25,000h 250lm Mercury max. Base Type 0.0mg E14 Switching cycles Casing material Starting time (30s on, 30s off) 100.000 Length 109mm Plastic Diameter 35mm <1s Weight 62g Tc temperature max.5 87° C Warm up time for 60% light none Nominal current (steady state) 40mA Power factor 0.45 Max. current (steady state) 150mA 3. Mounting information Good heat exchange supports ideal performance Tc Point 4 The average lifetime of LED lamps is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux (L70B50, IEC60969).The lifetime is estimated at room temperature (25°C), free air burning, base up burning position and at rated voltage. To achieve a full lifetime a good heat exchange for the electronic components is required. 5 The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp (in the indicated position) under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range (DIN EN 62031: 2009-01) 4. Disposal information WEEE-lamps can be returned at specific collection points. LED lamps have to be disposed as special waste. GL MK, Edition July 2012 subject to alteration 2 5. Application Information Applications general illumination domestic applications commercial areas residentials office space Application Notes 1. suitable for indoor application. 2. for outdoor applications and operation in damp locations special approved fixture are required. 3. Input voltage: 220-240V 4. Operating temperature range between -20°C and 40°C 5. Storage temperature & humidity conditions -20°C up to +40°C 95% relative humidity 6. Working temperature & humidity conditions -20°C up to +40°C 95% relative humidity 6. Cost savings: example Reference product description Similar incandescent product CLASSIC B25 adv frosted CLASSIC B25 Watts saved 20,5W Cost saved after 5 years Cost saved after 10 years Cost saved after end of life 44,23 € 143,50 € 11,14 € Based on the assumption of 2,7hours/day on and an energy cost of 0.19€/kWh 7. Ordering Guide Type reference CLASSIC B25 adv frosted E14 Product Number – 1pcs 4008321994011 Product Number – 1 shipping unit Number of pcs / ship. unit 4008321994028 6 8. Lamp conformity 2004/108/EC Electromagnetic compatibility (EMC) 2009/125/EC Ecodesign requirements for energy related products 2011/65/EC Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) 1907/2006 Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH Regulation) 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) EN 62471 Photobiological safety of lamps and lamp systems IEC/TR 62471-2 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety EN 55015 Limits and methods of measurement of radio disturance EN 61000-3-2 Electromagnetic compatibility – Limits for harmonic current emission EN 61000-3-3 Electromagnetic compatibility – Limitation of voltage changes, voltage fluactuations, flicker in public low voltage supply systems EN61547 Electromagnetic compatibility immunity requirements Status: July 2012 GL MK, Edition July 2012 subject to alteration 3 9. Dimming behaviours 6 Legend L / leading edge T / trailing edge Dimming behaviour Dimmer info Number of lamp under test: 1/2/4/6/10 Brand JUNG Schneider Lichtregler GIAR BUSCH Jung PEHA Duwi BUSCH PEHA Berker PEHA REV ELSO BUSCH Model 254 DU IE I ATD315 T46S 030700/I02 2247U 225 NV DE 207913/433 H1-53845 617U-101 207913/435 286110 433 HAB 13623 174120 2250U Note Dimming range (%) Type Min Max T 10 100 T 19 100 T 10 100 T 5 100 L 5 100 L 13 95 L 16 100 L 10 100 L 14 100 L 15 100 T 11 100 T 6 85 L 14 100 L 10 100 L 10 100 6 Typical values. Test performed exemplary on PARATHOM CLASSIC P25 adv frosted The test results reflect the measurement of the individual devices that were used in tests. OSRAM does not take over any responsibility, warranty or liability that this results can also be achieved by using the devices under other conditions or when using successor models of the tested devices or different models of the same manufacturer. The test results were achieved by using the above mentioned LED-lamp types. OSRAM does not take over any responsibility, warranty or liability that this results can also be achieved by using the devices under other conditions or when using other LED-lamp types. Status July 2012 GL MK, Edition July 2012 subject to alteration 4