UNISONIC TECHNOLOGIES CO., LTD U74ACT04 CMOS IC HEX INVERTERS DESCRIPTION DIP-14 The UTC U74ACT04 contains six independent inverters and each of them performs the Boolean function Y=A . FEATURES SOP-14 * Inputs are TTL Voltage Compatible TSSOP-14 ORDERING INFORMATION Ordering Number Lead Free Halogen Free U74ACT04L-D14-T U74ACT04G-D14-T U74ACT04G-S14-R U74ACT04G-P14-R Package Packing DIP-14 SOP-14 TSSOP-14 Tube Tape Reel Tape Reel MARKING DIP-14 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd SOP-14 / TSSOP-14 1 of 4 QW-R502-406.D U74ACT04 CMOS IC PIN CONFIGURATION FUNCTIONAL DIAGRAM FUNCTION TABLE 1A 1 14 VCC 1Y 2 13 6A 2A 3 12 6Y 2Y 4 11 5A 3A 5 10 5Y 3Y 6 9 4A GND 7 8 4Y INPUT(A) OUTPUT(Y) L H H L Note: H=High level; L=Low Level LOGIC DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R502-406.D U74ACT04 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT DC Supply Voltage VCC -0.5 ~ 7 V Input Voltage VIN -0.5 ~ VCC+0.5 V Output Voltage VOUT -0.5 ~ VCC+0.5 V DC Input Clamp Current For VIN < 0 or VIN > VCC IIK ±20 mA DC Output Clamp Current For VOUT < 0 or VOUT > VCC IOK ±20 mA Continuous Output Current For VOUT=0 to VCC IOUT ±50 mA Continuous Current Through VCC or GND ±200 mA Operating Temperature TOPR -40 ~ +85 °C Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient SYMBOL DIP-14 SOP-14 TSSOP-14 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA=25°С, unless otherwise specified) PARAMETER Supply Voltage High Level Input Voltage Low Level Input Voltage SYMBOL VCC VIH VIL High Level Output Voltage VOH Low Level Output Voltage VOL Input Leakage Current Quiescent Device Current Additional quiescent Supply Current Input Capacitance θJA RATINGS 81 112 141 II(Leak) IQ ∆IQ CIN TEST CONDITIONS VCC=4.5~5.5V VCC=4.5~5.5V VCC=4.5V IOUT=-50µA VCC=5.5V VCC=4.5V IOUT=-24 mA VCC=5.5V VCC=4.5V IOUT=-50µA VCC=5.5V VCC=4.5V IOUT=24mA VCC=5.5V VCC=5.5V, VIN=VCC or GND VCC=5.5V, VIN=VCC or GND, IOUT=0 VCC=5.5V, One input at 3.4V, Other inputs at GND or VCC VCC=5V, VIN=VCC or GND MIN 4.5 2 TYP MAX UNIT 5.5 V V 0.8 V 4.4 4.49 V 5.4 5.49 V 3.86 V 4.86 V 0.001 0.1 V 0.001 0.1 V 0.36 V 0.36 V ±0.1 µA 2 µA 0.6 mA 4.5 pF SWITCHING SPECIFICATIONS (TA=25°С ,Input tR, tF = 2.5ns) PARAMETER Propagation Delay, A to Y SYMBOL tPLH tPHL TEST CONDITIONS VCC=5±0.5V, CL=50pF, RL=500Ω VCC=5±0.5V, CL=50pF, RL=500Ω MIN 1 1 TYP MAX UNIT 6 8.5 ns 5.5 8 ns Power Dissipation Capacitance CPD VCC=5V, CL=50pF,f=1MHZ 45 pF (Notes 1, 2) Notes: 1. CPD is used to determine the dynamic power consumption, per inverter. 2. PD = VCC 2 fi (CPD + CL) where fi = Input Frequency, CL = Output Load Capacitance, VCC = Supply Voltage. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 4 QW-R502-406.D U74ACT04 CMOS IC TEST CIRCUITS AND WAVEFORMS Fig.1: Load circuitry for switching times. Note: CL includes probe and jig capacitance. 3V 1.5 V Input tPHL 1.5 V 0V tPLH VOH Output 1/2 * VCC 1/2 * VCC VOL Fig.2: Propagation delay from Input(A) to Output(Y). UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R502-406.D