UNISONIC TECHNOLOGIES CO., LTD U74LVC04A CMOS IC HEX INVERTERS DESCRIPTION DIP-14 The UTC U74LVC04A consists of six independent inverters, it provides the function Y = A . Inputs can be driven from either 3.3V or 5V devices, so the device can be used in a mix 3.3V/5V system. FEATURES SOP-14 * Operation Voltage Range: 1.65~3.6V * Low Power Dissipation * Input accept voltage to 5.5V TSSOP-14 ORDERING INFORMATION Ordering Number Lead Free U74LVC04AL-D14-T - Halogen Free U74LVC04AG-D14-T U74LVC04AG-S14-R U74LVC04AG-P14-R Package Packing DIP-14 SOP-14 TSSOP-14 Tube Tape Reel Tape Reel MARKING SOP-14 14 13 12 11 10 9 8 UTC U74LVC04AG 1 2 3 4 5 6 7 TSSOP-14 14 13 12 11 10 9 Date Code Lot Code www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 8 UTC U74LVC04AG 1 2 3 4 5 6 7 Date Code Lot Code 1 of 5 QW-R502-187.C U74LVC04A PIN CONFIGURATION FUNCTION TABLE (each gate) INPUT A L H CMOS IC OUTPUT Y H L LOGIC DIAGRAM (positive logic) IEC logic symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-187.C U74LVC04A CMOS IC ABSOLUTE MAXIMUM RATINGS (TA = 25°С, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5~6.5 V Input Voltage VIN -0.5~6.5 V Output Voltage(active mode) VOUT -0.5~VCC+0.5 V Input Clamp Current(ViN<0) IIK -50 mA Output Clamp Current(VOUT<0) IOK -50 mA Output Current IOUT ±50 mA VCC or GND Current ICC ±100 mA Power Dissipation 500 mW PD Derated Above 60°C 5.5 mW/°C Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL Supply Voltage VCC Input Voltage Output Voltage Operating Temperature VIN VOUT TA CONDITIONS Operating Data retention only MIN 1.65 1.5 0 0 -40 TYP MIN 0.65 × VCC 1.7 2 TYP MAX 3.6 5.5 VCC 125 UNIT V V V V °C MAX UNIT STATIC CHARACTERISTICS (TA = 25°С, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS VCC= 1.65V~1.95V High-Level Input Voltage VIH VCC=2.3V~2.7V VCC= 2.7V~3.6V V V V 0.35 ×VCC 0.7 0.8 VCC= 1.65V~1.95V Low-Level Input Voltage VIL VCC=2.3V~2.7V VCC= 2.7V~3.6V VCC= 1.65V~3.6V, IOH=-100μA High-Level Output Voltage VOH Low-Level Output Voltage VOL Input Leakage Current Quiescent Supply Current II(LEAK) IQ Additional quiescent Supply Current IQ Input Capacitance CIN VCC= 1.65V, IOH=-4mA VCC= 2.3V, IOH=-8mA VCC= 2.7V, IOH=-12mA VCC= 3V, IOH=-12mA VCC= 3V, IOH=-24mA VCC= 1.65V~3.6V, IOL=100μA VCC= 1.65V, IOL=4mA VCC= 2.3V, IOL=8mA VCC= 2.7V, IOL=12mA VCC= 3V, IOL=24mA VCC= 3.6V, VIN=5.5V or GND VCC= 3.6V, VIN=VCC or GND, IOUT=0 VCC= 2.7V ~ 3.6V One input at VCC- 0.6V, other inputs at VCC or GND VCC= 3.3V, VIN=VCC or GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw VCC -0.2 1.29 1.9 2.2 2.4 2.3 V V V V 5 0.1 0.24 0.3 0.4 0.55 ±1 1 V V V V V V V V V V μA μA 500 μA pF 3 of 5 QW-R502-187.C U74LVC04A DYNAMIC CHARACTERISTICS (TA = 25°С, unless otherwise specified) PARAMETER Propagation Delay From Input (A) to Output(Y) CMOS IC SYMBOL tPLH/tPHL TEST CONDITIONS VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=2.7V VCC=3.3V±0.3V MIN 1 1 1 1 TYP 4.1 3.6 3 2.5 MAX 7.5 7 5.3 4.3 UNIT ns ns ns ns TYP 6 7 8 MAX UNIT pF pF pF OPERATING CHARACTERISTICS (TA = 25°С, unless otherwise specified) PARAMETER SYMBOL Power Dissipation Capacitance Cpd TEST CONDITIONS VCC=1.8V, f=10MHz VCC=2.5V, f=10MHz VCC=3.3V, f=10MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 4 of 5 QW-R502-187.C U74LVC04A CMOS IC TEST CIRCUIT AND WAVEFORMS Note: CL includes probe and jig capacitance. VCC 1.8V±0.15V 2.5V±0.2V 2.7V 3.3V±0.3V VIN VCC VCC 2.7V 2.7 V tR,/tF ≤2ns ≤2ns ≤2.5ns ≤2.5ns VM VCC/2 VCC/2 1.5V 1.5V VLOAD 2×VCC 2×VCC 6V 6V CL 30pF 30pF 50pF 50pF RL 1KΩ 500Ω 500Ω 500Ω V△ 0.15V 0.15V 0.3V 0.3V UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-187.C