UNISONIC TECHNOLOGIES CO., LTD U74AC04 CMOS IC HEX INVERTERS DESCRIPTION The U74AC04 contains six independent inverters and performs the Boolean function Y= A in positive logic circuit. FEATURES * Operation Voltage Range: VCC =2V to 6V * High Speed: tPD=4ns(TYP.) at VCC =5V * Low Input Current: IIN=0.1μA(Max.) at TA =25°C * Low Power Dissipation: ICC=2μA(Max.) at TA =25°C ORDERING INFORMATION Ordering Number U74AC04G-S14-R U74AC04G-P14-R Package SOP-14 TSSOP-14 www.unisonic.com.tw Copyright © 2010 Unisonic Technologies Co., Ltd Packing Tape Reel Tape Reel 1 of 6 QW-R502-425.B U74AC04 CMOS IC PIN CONFIGURATION FUNCTION TABLE (Each Inverter) INPUT(A) OUTPUT(Y) H L L H Note: H: HIGH voltage level; L: LOW voltage level. LOGIC DIAGRAM (Each Inverter) Logic Symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 6 QW-R502-425.B U74AC04 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS Supply Voltage VCC -0.5 ~ +7 Input Voltage VIN -0.5 ~ VCC+0.5 Output Voltage VOUT -0.5 ~ VCC+0.5 VCC or GND Current ICC ±200 Continuous Output Current (VOUT=0 to VCC) IOUT ±50 Input Clamp Current (VIN<0 or VIN >VCC) IIK ±20 Output Clamp Current (VOUT<0 or VOUT >VCC) IOK ±20 Total Power Dissipation (TA=55°C) PD 0.5 Storage Temperature TSTG -65 ~ +150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage Operating Temperature SYMBOL VCC VIN VOUT TA High-Level Output Current IOH Low-Level Output Current IOL Input Transition Rise or Fall Rate UNIT V V V mA mA mA mA W °C TEST CONDITIONS MIN 2 0 0 -40 TYP MAX 6 VCC VCC 85 -12 -24 -24 12 24 24 8 UNIT V V V °C mA mA mA mA mA mA ns/V TYP MAX 0.1 0.1 0.1 0.36 0.36 0.36 ±0.1 UNIT V V V V V V V V V V V V V V V V V V μA 2 μA VCC=3V VCC=4.5V VCC=5.5V VCC=3V VCC=4.5V VCC=5.5V 0 tR / t F ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER High-level Input Voltage Low-level Input Voltage High-Level Output Voltage Low-Level Output Voltage Input Leakage Current Quiescent Supply Current Input Capacitance SYMBOL VIH VIL VOH VOL II(LEAK) IQ CIN TEST CONDITIONS VCC=3V VCC=4.5V VCC=5.5V VCC=3V VCC=4.5V VCC=5.5V IOH=-50μA VCC=3V IOH=-50μA VCC=4.5V IOH=-50μA VCC=5.5V IOH=-12mA VCC=3V IOH=-24mA VCC=4.5V IOH=-24mA VCC=5.5V IOL=50μA VCC=3V IOL=50μA VCC=4.5V IOL=50μA VCC=5.5V IOL=12mA VCC=3V IOL=24mA VCC=4.5V IOL=24mA VCC=5.5V VIN= VCC or GND, VCC=5.5V VIN= VCC or GND, IOUT=0 VCC=5.5V VIN= VCC or GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 2.56 3.86 4.86 2.99 4.49 5.49 2.8 pF 3 of 6 QW-R502-425.B U74AC04 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw CMOS IC 4 of 6 QW-R502-425.B U74AC04 CMOS IC SWITCHING CHARACTERISTICS (TA=25°С) PARAMETER SYMBOL tPLH tPHL tPLH tPHL Propagation delay from input (nA) to output(nY) TEST CONDITIONS VCC=3.3±0.3V,CL=50pF, RL=500Ω VCC=5±0.5V,CL=50pF, RL=500Ω MIN 1.5 1.5 1.5 1.5 TYP 4.5 4.5 4 3.5 MAX 9 8.5 7 6.5 UNIT ns ns ns ns MIN TYP 45 MAX UNIT pF OPERATING CHARACTERISTICS (TA=25°С) PARAMETER Power Dissipation Capacitance SYMBOL CPD TEST CONDITIONS CL=50pF, f=10MHZ UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 6 QW-R502-425.B U74AC04 CMOS IC TEST CIRCUIT AND WAVEFORMS VCC 3.3V±0.3V 5V±0.5V INPUTS VIN VCC VCC tR, tF ≤2.5ns ≤2.5ns VM CL RL VCC /2 VCC /2 50pF 50pF 500Ω 500Ω Note: CL includes probe and jig capacitance. All input pulses are supplied by generators having the following characteristics: PRR ≤1MHz, Zo = 50Ω. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R502-425.B