TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: SAW Filter 1161 MHz SMD 3.0X3.0 mm(BW=34MHz) TST Part No.: TA1414B Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Anne Chen Approved by: Bob Chau Date: 01, 27, 2016 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the change TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 1161 MHz MODEL NO.:TA1414B REV. NO.:1 A. MAXIMUM RATING: 1. Input Power Level: 20 dBm 2. DC Voltage : 3V RoHS Compliant Lead free Lead-free soldering 3. Operating Temperature: -40°C to +85°C 4. Storage Temperature: -40°C to +85°C Electrostatic Sensitive Device (ESD) B. ELECTRICAL CHARACTERISTICS: Terminating source impedance (single ended) : Terminating load impedance (single ended) : Item Zs = 50 Ω ZL = 50 Ω Unit MHz Min. - Typ. 1161 Max. - Note - Insertion Loss (1144 ~ 1178 MHz) dB - 2.9 4 - Amplitude Variation (1144 ~ 1178 MHz) dB - 0.8 2 - Amplitude Variation over 3 MHz dB - 0.3 1 - - 2 2.4 - ns - 4.5 20 - MHz dB 30 47 - - 1197~1223 MHz dB 6 20 - - 1223~2000 MHz dB 30 44 - - ppm/℃ - -36 - - Center Frequency Fc VSWR (1144 ~ 1178 MHz) Group Delay Variation over 3 MHz Attenuation (reference level from 0 dB) DC~1123 Temperature Coefficient of Frequency C. MEASUREMENT CIRCUIT: HP Network analyzer 2 SAW Filter 5 1,3,4,6 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 D.OUTLINE DRAWING: △ D □ 2 2 : Input 5 : Output 1,3,4,6 : Ground Unit : mm △ : Year Code (2009->9, 2010->0,…, 2018->8) □ : Date Code (W01->A,W02->B,…W27->a,…,W52->z) E. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 F. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Reflection Functions : S11 S22 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) 2.TAPE DIMENSION D2 △ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 H. RECOMMENDED REFLOW PROFILE : 1. 2. 3. 4. Preheating shall be fixed at 150~180℃ for 60~90 seconds. Ascending time to preheating temperature 150℃ shall be 30 seconds min. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec). Time : 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7