V i s h ay I n t e rt e c h n o l o g y, I n c . I INNOVAT AND TEC O L OGY 534-8872 N HN POTENTIOMETERS O 19 62-2012 Resistors - 22.2 mm, 10 Turns 10 Turns, Wirewound Potentiometer - Metric Key Benefits • • • • • 22.22 mm (0.875 inches) diameter potentiometer Special shafts up to 50.8 mm (2 in.) Rear shaft extensions Dual gang versions 36.7 mm (1.445 in.) length (bush mount) 1 million shaft revolutions APPLICATIONS • • • • Medical instruments Welding machines Wire cutting machines Almost any industrial control that requires a metric shaft Resources • Datasheet: 534-8872 - http://www.vishay.com/doc?57065 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT9019-1202 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e rt e c h n o l o g y, I n c . O N AND TEC Vishay Spectrol 534-8872 19 O L OGY INNOVAT I HN POTENTIOMETERS Model 533, 534, 535 62-2012 7/ " (22.2 mm) Multiturn Wirewound 533: 3 Turns/534: 10 Turns/535: 5 Turns 10 Turns,8 Wirewound Potentiometer - Metric FEATURES • • • • • • • Resistors - 22.2 mm, 10 Turns Note • The color of this product may either be black (US market) or blue (other regions) Bushing and servo mount designs available Special resistance tolerances to 1 % RoHS Rear shaft extensions and support bearing COMPLIANT Metric shaft available Dual gang configuration and concentric shafts High torque, center tap, slipping clutch on request Special markings and front shaft extensions ELECTRICAL SPECIFICATIONS PARAMETER MODEL 533 MODEL 534 MODEL 535 Resistance Range - Standard Values 50 Ω to 20 kΩ 100 Ω to 100 kΩ 50 Ω to 50 kΩ Capability Range 5 Ω to 60 kΩ 10 Ω to 200 kΩ 5 Ω to 100 kΩ ±5% ±5% ±5% ± 0.25 % ± 0.25 % ± 0.25 % Noise 100 Ω ENR 100 Ω ENR 100 Ω ENR Rotation (Electrical and Mechanical) 1080° +- 10° 0° 3600° +- 10° 0° 1800° +- 10° 0° 2.0 W 1.5 W Standard Tolerance Linearity (Independent) Power Rating (at 70 °C) 1.0 W Insulation Resistance 1000 MΩ minimum 500 VDC Dielectric Strength 1000 VRMS minimum 60 Hz Not to exceed linearity x total resistance or 1 Ω, whichever is greater Absolute Minimum Resistance Temperature Coefficient 20 ppm/°C (standard values, wire only) End Voltage 0.25 % of total applied voltage, maximum Phasing CCW end points - section 2 phased to section 1 within ± 2° Taps Center tap only MARKING Unit Identification RESISTANCE VALUES Ohms 533: Manufacturer’s name and model number, resistance value and tolerance, linearity specification date code and terminal identification 50R, 100R, 200R, 500R, 1K, 2K, 5K, 10K, 20K 534: 100R, 200R, 500R, 1K, 2K, 5K, 10K, 20K, 50K, 100K 535: 50R, 100R, 200R, 500R, 1K, 2K, 5K, 10K, 20K, 50K ORDERING INFORMATION/DESCRIPTION The Models 533 (3 turns), 534 (10 turns) and 535 (5 turns) can be ordered by stating 534 MODEL B MOUNTIN G B: Bushing S: Servo 2 10K 20K 5% C NUMBER OF SECTIONS OHMIC VALUE SECTION No 1 OHMIC VALUE SECTION No 2 TOLERANCE ON OHMIC VALUE LINEARITY ± 0.25 % (STD) BO10 e4 PACKAGING LEAD FINISH Box of 10 pieces Revision 06-Apr-10 SAP PART NUMBERING GUIDELINES 534 B 2 103 203 J C B10 MODEL STYLE NUMBER OF SECTIONS OHMIC VALUE SECTION No 1 OHMIC VALUE SECTION No 2 TOLERANCE ON OHMIC VALUE LINEARITY PACKAGING 103 = 10K 203 = 20K J: ± 5 % F: ± 1 % C: ± 0.25 % CUSTOM: L: ± 0.20 % D: ± 0.1 % Box of 10 pieces B: Bushing S: Servo Document Number: 57065 Revision: 06-Apr-10 PRODUCT SHEET For technical questions, contact: [email protected] 2/2 www.vishay.com 123 VMN-PT9019-1202 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000