PP22 SA www.vishay.com Vishay MCB High Reliable Sensor Dedicated to Aeronautic Applications FEATURES • Conductive plastic potentiometer technology • Very robust version • Precious metal contacts, stainless steel shaft and bearings, anodized light alloy flange • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA Sensor type Output type Market appliance Dimensions ROTATIONAL, conductive plastic Output by wires Industrial, avionics 22.1 mm ELECTRICAL SPECIFICATIONS PARAMETER Number of cup Total electrical travel Useful electrical travel Rated resistance Independent linearity standard Independent linearity optional Rated power dissipation Output smoothness Resolution Insulation resistance Dielectric strength Wiper current Output voltage hysteresis 1 90° ± 3° (more on request) 70 °C (more on request) 5 k ± 20 % ±1% ± 0.5 % 0.2 W at 70 °C 0.1 % Infinite 100 Mat 500 VDC Leakage current 1 mA under conditions 500 VAC, 50 Hz, 1 min 1 mA 0.08 % of Usupply MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel Running torque Recommended mounting 360° (continuous rotation) 20 cN cm Flexible coupling between customer motor element and potentiometer shaft PERFORMANCE PARAMETER Life 25M cycles Note • Nothing stated herein shall be construed as a guarantee of quality or durability. ENVIRONMENTAL SPECIFICATIONS PARAMETER Operating temperature Operational shocks Vibration Applicable specification Revision: 20-Oct-15 -55 °C to +125 °C 50 g - 11 ms - 1/2 sinus (on each direction of the three major axis) 1.5 mm peak to peak between 10 Hz to 60 Hz (on the three major axis) 20 g between 60 Hz to 2000 Hz (on the three major axis) NFC 93-255 / MIL R 39023 Document Number: 32534 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PP22 SA www.vishay.com Vishay MCB SAP PART NUMBERING GUIDELINES MODEL MOUNTING TYPE VALUE LINEARITY ANGLE PACKAGING PP22 S = servo A = aeronautic (including ball bearing) 502 = 05K A=1% B = 0.5 % 090 B = box DIMENSIONS in millimeters MECHANICAL INTERFACE DESCRIPTION 1 ± 0.4 0.8 ± 0.2 Ch. 1 à 45° 18 - 20 9 ± 0.5 12 1.6 1.6 1.6 0.6 max. Ø 6.5 max. Ø 22.1 max. Ø 19.05 - 00.013 Ø 19.25 max. 0 Ø 22.1 - 0.2 0 Ø 3.175 - 0.013 Potting 14.55 ± 0.4 10 ± 5 Heat-shrinkable sleeve 700 min. U/2 position (option): Shaft chamfer on red dot side Alignment of screwdriver slot / red dot: ± 15° 3 wires KZ04-04 AWG26 10 ± 1 DIMENSIONS in millimeters ELECTRICAL INTERFACE DESCRIPTION C.W. (clockwise): shaft rotation face on Useful electrical travel: 70° Yellow Red Green Total electrical travel: 90° ± 3° OPTIONS (on request) • • • • • Other ohmic value and tolerances on this ohmic value Other linearity and absolute function Other total and useful electrical travel Other shaft designs Mechanical phasing Revision: 20-Oct-15 Document Number: 32534 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000