Multi-Track P22R www.vishay.com Vishay MCB 5-Turn Analog Displacement Sensor P22 Redundant FEATURES • Dual conductive plastic potentiometer technology • Infinite resolution • Molded metal housing • Stainless steel shaft • Precious metal contacts • Soldering terminal contacts QUICK REFERENCE DATA Sensor type ROTATIONAL, multi turns conductive plastic Output type Output by turrets, wires, or connector Market appliance Dimensions • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Transportation 51.1 mm x 30 mm ELECTRICAL SPECIFICATIONS PARAMETER Theoretical electrical travel 1700° ± 15° Independent linearity ±1% Inter-linearity ± 2.5 % Total resistance (Rn) 2 x 2.2 k Tolerance on Rn ± 20 % Output smoothness 0.1 % Power rating at 70 °C 1W Temperature coefficient -300 ± 300 ppm/°C 1 mA Wiper current 100 Rn Recommended load impedance 1 G at 500 VDC Insulation resistance Dielectric strength 750 VRMS, 50 Hz, 1 min MECHANICAL SPECIFICATIONS PARAMETER Mechanical rotation Continuous 2 N cm Running and starting torque 250 N cm Panel tightening torque Weight Protection class 100 g IP 50 to IP 66 (front face) Backlash < 14° PERFORMANCE PARAMETER Operating temperature range Life -30 °C to +70 °C 100M cycles Rotation speed (max.) 150 rpm Note • Nothing stated herein shall be construed as a guarantee of quality or durability. Revision: 09-Sep-15 Document Number: 32519 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Multi-Track P22R www.vishay.com Vishay MCB SAP PART NUMBERING GUIDELINES MODEL FUNCTION MOUNTING TYPE VALUE LINEARITY ANGLE PACKAGING P22 R = redundant S = servo R = ball bearing 222 = 2K2 A=1% 1700 # 5 turns B = box DIMENSIONS in millimeters 26 ± 0.5 13 Ø 6 ± 0.05 8.9 4.5 11 22 Ø 20 - 00.05 45 51.2 Track 2 4.5 Track 1 Ø4 Ø 2 26 4.2 19° 4 46 ELECTRICAL DIAGRAM Ve Track 1 A Vo C Rotation Vo 1 Track 1 Vo 1 Track 2 Vo 2 B Track 2 C A 0 5 turns Rotation B Vo 2 Clockwise rotation viewed from shaft side with identical wiring on both tracks Ve OPTIONS (on request) • Other total resistance (Rn) • Wire outputs or connector • Other versions: 2.5 turns and 8 turns Revision: 09-Sep-15 Document Number: 32519 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000