PP27 BS www.vishay.com Vishay MCB Single Turn Continuous Rotation Potentiometer or with Stop-Ends Conductive Plastic Track FEATURES • Infinite resolution • Precious metal contacts • Housing: high temperature thermo plastic • Terminals: soldering pins • Shaft: stainless steel • Plain bearing (= sleeve bearing) • Bush mounting • Rotation with stop-ends (standard design) or without QUICK REFERENCE DATA Sensor type Output type Market appliance Dimensions ROTATIONAL, conductive plastic Output by turrets Industrial 27 mm • Dust proof • Applicable standards: NFC 93255, MIL R39023 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ELECTRICAL SPECIFICATIONS PARAMETER Useful electrical travel Independent linearity standard Independent linearity optional Total resistance (Rn) Tolerance on Rn Output smoothness Power rating at 40 °C Temperature coefficient Wiper current Recommended load impedance Insulation resistance Dielectric strength 310° ± 5° ± 1.0 % ± 0.5 % 10 k ± 20 % 0.1 % 1W -300 ± 300 ppm/°C 1 mA 100 Rn for linearity = 1 % 1000 Rn for linearity 0.5 % 1 G at 500 VDC 750 V, 50 Hz, 1 min MECHANICAL SPECIFICATIONS PARAMETER Mechanical rotation without stop Mechanical rotation with stop Running and starting torque Stop torque Bush tightening torque Moment of inertia Protection class Weight Mounting 360° continuous 333° ± 5 ° continuous 1.4 N cm 100 N cm 250 N cm 1 g cm2 IP50 30 g Bush PERFORMANCE PARAMETER Operating temperature range Life Rotation speed (max.) Revision: 22-Mar-16 -55 °C to +105 °C 10M cycles 120 rpm Document Number: 32536 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PP27 BS www.vishay.com Vishay MCB SAP PART NUMBERING GUIDELINES MODEL MOUNTING TYPE GANG VALUE LINEARITY ANGLE PACKAGING PP27 B = bushing S = sleeve bearing 1 103 = 10K A=1% 310 B = box Ø 26 ± 0.1 DIMENSIONS in millimeters 0 Ø 12 -0.05 M10 x 0.75 a Ø 27 ± 0.2 35° 1 ± 0.1 Front panel 0 Ø 6 -0.05 35° b 2 ± 0.2 c 1.5 ± 0.2 9 ± 0.5 7 R1 10 ± 0.5 . ax L standard 25 ± 0.5 m 11.25 ± 0.5 19 ± 0.5 ELECTRICAL DIAGRAM POWER RATING CHART A C W 1.0 B °C 0 40 105 Clockwise when viewed from shaft end OPTIONS (on request) • Continuous rotation (without stop-ends) • Through shaft • Ganging 2 or 3 • Other electrical travels • Other ohmic value • Other tolerances on Rn • Other linearities (0.5 %) • Middle tap Revision: 22-Mar-16 Document Number: 32536 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000