RP12 www.vishay.com Vishay MCB Analog Linear Displacement Sensor FEATURES • Conductive plastic potentiometer technology. Infinite resolution • Anodized light alloy housing • Stainless steel floating shaft • Flange mounting • Wire outputs QUICK REFERENCE DATA Sensor type LINEAR, conductive plastic Output type Output by wires Market appliance Dimensions • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Industrial Diameter 1/2" (12.7 mm) ELECTRICAL SPECIFICATIONS PARAMETER Theoretical electrical travel UET +1 mm to 0 mm Independent linearity standard ± 0.5 % Independent linearity optional ± 0.1 % (UET 50 mm), ± 0.25 % (UET 50 mm) ± 20 % Tolerance on Rn Temperature coefficient -300 ± 300 ppm/°C 1 mA Wiper current 1000 Rn Recommended load impedance Dielectric strength 500 VRMS, 50 Hz, 1 min Insulation resistance 10 G at 500 VDC Output smoothness 0.1 % Useful electrical travel (UET) 10 mm 25 mm 50 mm 75 mm 100 mm 150 mm 200 mm 250 mm 300 mm Power rating at +70 °C (0.2 W/cm of travel) 0.2 W 0.5 W 1.0 W 1.5 W 2.0 W 3.0 W 4.0 W 5.0 W 6.0 W Total resistance Rn 2.2 k 4.7 k 4.7 k 10 k 10 k 10 k 10 k 22 k 22 k MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel UET + 4 mm 2N Driving force Backlash < 15 μm Protection class IP 64 Maximum displacement speed 1.5 m/s Mounting 1 block (UET < 100 mm) and 2 blocks (UET 100 mm) Useful electrical travel (UET) Weight 10 mm 25 mm 50 mm 75 mm 100 mm 150 mm 200 mm 250 mm 300 mm Shaft + wiper 4g 6g 8g 11 g 13 g 18 g 23 g 28 g 33 g Sensor 20 g 22 g 27 g 30 g 40 g 51 g 65 g 75 g 86 g PERFORMANCE PARAMETER Operating temperature range -40 °C to +105 °C Storage temperature range -55 °C to +125 °C Life 20M cycles Note • Nothing stated herein shall be construed as a guarantee of quality or durability. Revision: 09-Sep-15 Document Number: 32524 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RP12 www.vishay.com Vishay MCB SAP PART NUMBERING GUIDELINES MODEL USEFUL ELECTRICAL TRAVEL (mm) TYPE VALUE LINEARITY LEADS PACKAGING RP12 010 025 050 075 100 150 200 250 300 L = linear 222 = 2K2 472 = 4K7 103 = 10K 223 = 22K B = 0.5 % W = wire b = bulk In accordance with UET, see “Electrical Specifications” Teflon wires gauge 26 length 300 16 Ø 12.7 DIMENSIONS in millimeters 2 x Ø 3.2 diam. holes M4 15 Mounting block (on request) 15 19 L = UET + 37 25 26 FRONT PIVOT OPTION (ON REQUEST) REAR PIVOT OPTION (ON REQUEST) ss 5 ne Ø hick t L = UET + 56.5 27 ± 1.5 38.5 Ø 18 Ø 18 8 Ø 18 8 L = 44 ± 2.5 ss 5 ne Ø hick t Wires 26.5 Ø 15 STRAIGHT OR RIGHT ANGLE CONNECTOR OPTION (ON REQUEST) Cable customer 35 L = UET + 37 37.2 31.2 Ø 15 35 58 Cable customer Revision: 09-Sep-15 Document Number: 32524 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RP12 www.vishay.com Vishay MCB ELECTRICAL DIAGRAM 2 3 1 3 Yellow Green 1 2 Red 4 Direction of wiper displacement with shaft extended CONNECTION OPTIONS (on request) • Other linearity • Probe version for UET < 100 mm (spring and tip) • Low driving force version ( 30 cN/ IP 50) • Lateral or axial cable output • Binder 713-M12 series straight connector output • Binder 713-M12 series right angle connector output • Male socket fitted on connector • Additional mounting block • Front pivot • Rear pivot (only with lateral cable output) Revision: 09-Sep-15 Document Number: 32524 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000