Datasheet

DIP 6-pin, High-dielectric-strength Type
High-load-voltage
MOS FET Relays in DIP 6-pin
packages that achieve a dielectric
strength of 5,000 VAC between I/O
• Load voltage: 400 V or 600 V
Multi-contact-pair High-current and
Small and High(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength
RoHS Compliant
■Application Examples
• Electrical power unit
• Industrial equipment
• Test & Measurement equipment
• Medical equipment
Note: The actual product is marked differently from the
image shown here.
• Security equipment
■Package
■Model Number Legend
(Unit : mm, Average)
DIP 6-pin
G3V M- @ @ @ @ @
PCB Terminals
1 2 3 4
7.12
5
High-dielectricstrength
Current-limiting
3.65
1. Load Voltage
40 : 400 V
60 : 600 V
3.65
4. Additional functions
Y: Dielectric strength between
I/O above 2,500 V type
6.4
2. Contact form
1 : 1a (SPST-NO)
3. Package
B : DIP 6-pin with PCB terminals
E : DIP 6-pin with surface-mounting
terminals
Surface-mounting Terminals
7.12
6.4
Low-output-capacitance
and Low-ON-resistance
Note: The actual product is marked differently
from the image shown here.
5. Other informations
When specifications overlap, serial code is
added in the recorded order.
■Ordering Information
Package Contact form
Small and Highload-voltage
DIP6
1a
(SPST-NO)
Continuous load current
(peak value) *
Load voltage
(peak value) * Connection Connection
A, B
C
400 V
120 mA
240 mA
600 V
100 mA
200 mA
Stick packaging
Model
Surface-mounting
PCB Terminals
Terminals
G3VM-401BY
G3VM-401EY
G3VM-601BY
G3VM-601EY
Minimum
package
quantity
50 pcs.
Tape packaging
Model
Minimum
package
Surface-mounting
quantity
Terminals
G3VM-401EY(TR)
G3VM-601EY(TR)
1,500 pcs.
Certified Models with
Standards Certification
* The AC peak and DC value are given for the load voltage and continuous load current.
Note: To order tape packaging for Relays with surface-mounting terminals, add “(TR)” to the end of the model number.
■Absolute Maximum Ratings (Ta = 25°C)
Item
Input
General-purpose
MOS FET Relays
Symbol
G3VM-@BY/@EY
LED forward current
Repetitive peak LED forward current
LED forward current reduction rate
LED reverse voltage
Connection temperature
Load voltage (AC peak/DC)
IF
IFP
ΔIF/°C
VR
TJ
VOFF
Connection A
Output
Introduction
DIP
SOP
SSOP
USOP
VSON
G3VM-@BY/@EY
Continuous load
current
Connection B
IO
Connection C
Connection A
Connection B
Connection C
Connection temperature
Dielectric strength between I/O
(See note 1.)
Ambient operating temperature
Ambient storage temperature
Soldering temperature
ON current
reduction rate
132
ΔIO/°C
TJ
G3VM-401BY G3VM-601BY
G3VM-401EY G3VM-601EY
50
1
-0.5
5
125
400
600
120
100
240
200
-1.2
-2.4
20
-1.0
-2.0
35
Measurement
conditions
Unit
mA
A
mA/°C
V
°C
V
mA
mA/°C
125
°C
VI-O
5000
Vrms
Ta
Tstg
−
-40 to +85
-55 to +125
260
°C
°C
°C
100 μs pulses, 100 pps
Ta ≥ 25°C
Note: The dielectric strength between the
input and output was checked by
applying voltage between all pins as
a group on the LED side and all pins
as a group on the light-receiving side.
Connection Diagram
Connection A:
AC peak/DC
Connection B and C:
DC
Connection A
Ta ≥ 25°C
Connection B
AC for 1 min
With no icing or
condensation
10 s
Connection C
1
6
2
5
3
4
1
6
2
5
3
4
1
6
2
5
3
4
Load
AC
or
DC
Load
DC
Load
DC
MOS FET Relays
Item
VF
1
Typical
1.15
Maximum
1.3
Unit
V
Measurement conditions
IF=10 mA
Reverse current
IR
Maximum
10
μA
VR=5 V
Capacitance between terminals
CT
Typical
30
pF
V=0, f=1 MHz
Trigger LED forward current
IFT
−
1.6
3
5
Typical
Connection B
Connection C
Maximum
resistance with
output ON
mA
17
30 (25)
11
23
G3VM-401BY/EY : IF= 5 mA, IO=120 mA
G3VM-601BY/EY : IF=10 mA, IO=100 mA
6
12
Ω
RON
Connection A
Maximum
Connection B
Connection C
ILEAK
Maximum
Capacitance between terminals
COFF
Typical
Capacitance between I/O terminals
CI-O
Insulation resistance between I/O
terminals
RI-O
tON
Turn-OFF time
tOFF
45 (35)
G3VM-401BY/EY : IF= 5 mA, IO=120 mA
G3VM-601BY/EY : IF=10 mA, IO=100 mA
Values in parentheses are for t < 1 s.
20
35
G3VM-401BY/EY : IF= 5 mA, IO=120 mA
G3VM-601BY/EY : IF=10 mA, IO=100 mA
10
18
G3VM-401BY/EY : IF= 5 mA, IO=240 mA
G3VM-601BY/EY : IF=10 mA, IO=200 mA
1
40
120
Typical
0.8
1000
Typical
108
0.3
Maximum
1.0
Typical
0.1
μA
VOFF=Load voltage ratings
pF
V=0, f=1 MHz
pF
f=1 MHz, VS=0 V
MΩ
VI-O=500 VDC, ROH≤60%
ms
G3VM-401BY/EY : IF=5mA,
RL=200Ω, VDD=20V (See note 2.)
G3VM-601BY/EY : IF=10mA,
RL=200Ω, VDD=20V (See note 2.)
0.2
1.5
0.2
Maximum
1.0
Current-limiting
Turn-ON time
35
Minimum
Typical
G3VM-401BY/EY : IF= 5 mA, IO=240 mA
G3VM-601BY/EY : IF=10 mA, IO=200 mA
High-dielectricstrength
Current leakage when the relay is
open
IO=Continuous load current ratings
G3VM-401BY/EY : IF= 5 mA, IO=120 mA
G3VM-601BY/EY : IF=10 mA, IO=100 mA
Values in parentheses are for t < 1 s.
Small and HighMulti-contact-pair High-current and
(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength
Typical
Maximum
Connection A
Output
G3VM-601BY
G3VM-601EY
Minimum
High-load-voltage
LED forward voltage
Input
G3VM-401BY
G3VM-401EY
Symbol
General-purpose
■Electrical Characteristics (Ta = 25°C)
Note: 2. Turn-ON and Turn-OFF Times
IF
6
2
4
RL
VDD
VOUT
Low-output-capacitance
and Low-ON-resistance
1
IF
10%
90%
t ON
Small and Highload-voltage
VOUT
t OFF
■Recommended Operating Conditions
Item
G3VM-401BY
G3VM-401EY
G3VM-601BY
G3VM-601EY
Unit
Maximum
320
480
V
Minimum
5
7.5
Typical
7.5
15
Symbol
Load voltage (AC peak/DC)
VDD
IF
Continuous load current (AC peak/DC)
IO
Ambient operating temperature
Ta
Maximum
Maximum
25
120
DIP
SOP
SSOP
USOP
VSON
mA
100
Minimum
-20
Maximum
65
°C
G3VM-@BY/@EY
Operating LED forward current
Certified Models with
Standards Certification
For usage with high reliability, Recommended Operation Conditions is a measure that takes into account the derating of Absolute
Maximum Ratings and Electrical Characteristics.
Each item on this list is an independent condition, so it is not simultaneously satisfy several conditions.
■Spacing and Insulation
Item
Introduction
G3VM-@BY/@EY
Minimum
Creepage distances
7.0
Clearance distances
7.0
Internal isolation thickness
0.4
Unit
mm
133
MOS FET Relays
● LED forward current vs.
Ambient temperature
● Continuous load current vs.
Ambient temperature
30
20
G3VM-401BY/EY: Connection C
G3VM-601BY/EY: Connection C
250
200
150
G3VM-401BY/EY: Connection A, B
100
10
0
20
40
60
80
100
Ambient temperature Ta (°C)
● Continuous load current vs.
On-state voltage
-40
0
-20
● On-state resistance vs.
Ambient temperature
G3VM-401BY/EY
G3VM-601BY/EY
High-dielectricstrength
0
-40
Current-limiting
-1
30
G3VM-601BY/EY
20
0
-20
20
40
Low-output-capacitance
and Low-ON-resistance
Small and Highload-voltage
tOFF
tOFF
Certified Models with
Standards Certification
tON
1.2
1.3
1.4
2
G3VM-601BY/EY
1.5
G3VM-401BY/EY
1
0.5
60
80
100
-40
-20
0
20
40
60
80 100
Ambient temperature Ta (°C)
● Current leakage vs.
Ambient temperature
tON, tOFF - Ta
G3VM-401BY/EY
1.1
IO=Continuous Load Current Ratings
t<1s
Ambient temperature Ta (°C)
● Turn ON, Turn OFF time vs.
Ambient temperature
G3VM-401BY/EY:
VDD=10V, RL=200Ω, Ta=25°C
G3VM-601BY/EY:
VDD=20V, RL=200Ω, Ta=25°C
100
1
2.5
0
-40
tON, tOFF - IF
G3VM601BY/EY
0.9
ILEAK - Ta
1000
G3VM-401BY/EY
tON
tON
tOFF
G3VM-601BY/EY
100
tOFF
100
VOFF=Load voltage ratings
G3VM-601BY/EY
10
1
G3VM-401BY/EY
0.1
G3VM-401BY/EY
0.01
G3VM-401BY/EY: VDD=20V, RL=200Ω, IF=5mA
G3VM-601BY/EY: VDD=20V, RL=200Ω, IF=10mA
10
DIP
SOP
SSOP
USOP
VSON
G3VM-@BY/@EY
134
10
1
10
100
LED forward current IF (mA)
-40
-20
0
20
40
60
80
100
Ambient temperature Ta (°C)
1.5
LED forward voltage VF (V)
0
0
1
2
3
On-state voltage VON (V)
● Turn ON, Turn OFF time vs.
LED forward current
1000
0.8
IFT - Ta
G3VM-401BY/EY: IO=120mA, IF=5mA, Connection A
G3VM-601BY/EY: IO=100mA, IF=10mA, Connection A
40
G3VM-401BY/EY
-2
0.1
● Trigger LED forward current vs.
Ambient temperature
10
-80
-3
1
RON - Ta
G3VM-401BY/EY: Ta=25°C, IF=5mA, Connection A
G3VM-601BY/EY: Ta=25°C, IF=10mA, Connection A
40
-120
10
Trigger LED forward current IFT (mA)
IO - VON
120
80
Ta=25°C
20
40
60
80 100
Ambient temperature Ta (°C)
Current leakage ILEAK (nA)
0
100
G3VM-601BY/EY: Connection A, B
50
-20
LED forward current IF (mA)
40
IF - VF
300
On-state resistance RON (Ω)
Multi-contact-pair High-current and
Small and High(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength
Continuous load current IO (mA)
50
0
-40
● LED forward current vs.
LED forward voltage
IO - Ta
60
Turn ON, Turn OFF time tON, tOFF (μs)
High-load-voltage
LED forward current IF (mA)
IF - Ta
Continuous load current IO (mA)
General-purpose
■Engineering Data
Turn ON, Turn OFF time tON, tOFF (μs)
Introduction
G3VM-@BY/@EY
0.001
-40
-20
0
20
40
60
80
100
Ambient temperature Ta (°C)
MOS FET Relays
●Appearance
●Terminal Arrangement/Internal Connections
(Top View)
DIP (Dual Inline Package)
6
5
4
1
2
3
High-load-voltage
DIP 6-pin
Mold pin mark (See note 3.)
OMRON logo
Model name (See note 2.)
932
Pin 1 mark
LOT.NO.
Small and HighMulti-contact-pair High-current and
(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength
Note: 1. The actual product is marked differently from the image shown here.
Note: 2. “G3VM” does not appear in the model number on the Relay.
Note: 3. The indentation in the corner diagonally opposite from the pin 1 mark
is from a pin on the mold.
■Dimensions (Unit: mm)
PCB Terminals
Surface-mounting Terminals
PCB Dimensions (BOTTOM VIEW)
Weight: 0.4 g
Weight: 0.4 g
2.54
Six, 0.8-dia. holes
(0.61)
2.54
(0.61)
(1.52)
(1.52)
6.4±0.25
Actual Mounting Pad Dimensions
6.4±0.25
7.62±0.25
(Recommended Value, Top View)
7.62±0.25
2.54
3.65+0.15
-0.25
3.65+0.15
-0.25
1.2±0.15
2.5 min.
0.5±0.1
8.3 to 8.8
1.2±0.15
7.85 to 8.80
2.54±0.25
1.0 min.
10.0 max.
1.3
Low-output-capacitance
and Low-ON-resistance
2.54±0.25
2.54
4.0+0.25
-0.2
1.0
min.
0.25+0.1
-0.05
Current-limiting
0.8±0.25
1.5
Note: The actual product is marked differently from the image shown here.
■Approved Standards
Small and Highload-voltage
UL recognized
Approved Standards
Contact form
File No.
UL (recognized)
1a (SPST-NO)
E80555
High-dielectricstrength
7.12±0.25
7.12±0.25
General-purpose
■Appearance / Terminal Arrangement / Internal Connections
Introduction
G3VM-@BY/@EY
Certified Models with
Standards Certification
■Safety Precautions
• Refer to the Common Precautions for All MOS FET Relays for precautions that apply to all MOS FET Relays.
DIP
SOP
SSOP
USOP
VSON
G3VM-@BY/@EY
135