Introduction MOS FET Relays General-purpose G3VM-201G@/S5 SOP 4-pin, General-purpose Type High-load-voltage General-purpose MOS FET Relays in SOP 4-pin packages for a wide range of applications • Load voltage: 200 V Note: The actual product is marked differently from the image shown here. ■Application Examples • Semiconductor test equipment • Security equipment • Test & Measurement equipment • Industrial equipment • Communication equipment • Power circuit ■Package • Amusement equipment ■Model Number Legend (Unit : mm, Average) High-dielectricstrength G3V M- @ @ @ @ SOP 4-pin 1 2 3 4 3.9 1. Load Voltage 20 : 200 V 2.1 4.4 2. Contact form 1 : 1a (SPST-NO) 3. Package G : SOP 4-pin Current-limiting 4. Other informations When specifications overlap, serial code is added in the recorded order. Note: The actual product is marked differently from the image shown here. Note: The model number legend for the G3VM-S5 is different from the above legend. Stick packaging Terminals SOP4 1a (SPST-NO) Surface-mounting Terminals Load voltage Continuous load current (peak value) * (peak value) * 50 mA G3VM-201G 200 mA Minimum package quantity Model G3VM-201G(TR) G3VM-201G1 200 V Tape packaging Minimum package quantity Model G3VM-201G2 100 pcs. G3VM-S5 G3VM-201G1(TR) G3VM-201G2(TR) 2,500 pcs. G3VM-S5(TR) ■Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate Connection temperature Output Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Pulse ON current Connection temperature G3VM-201G IF G3VM-201G1 G3VM-201G2 G3VM-S5 Unit 30 50 mA -0.3 -0.5 mA/°C 50 IFP 1 ΔIF/°C -0.5 A VR 5 V TJ 125 °C VOFF 200 V IO 50 200 mA ΔIO/°C -0.5 -2 mA/°C lop 150 600 mA Measurement conditions 100 μs pulses, 100 pps Ta ≥ 25°C Ta ≥ 25°C t=100 ms, Duty=1/10 TJ 125 °C Dielectric strength between I/O (See note 1.) VI-O 1500 Vrms Ambient operating temperature Ta -40 to +85 °C Tstg -55 to +125 °C With no icing or condensation − 260 °C 10 s Ambient storage temperature Soldering temperature DIP SOP SSOP USOP VSON G3VM-201G@/S5 LED reverse voltage Symbol Certified Models with Standards Certification * The AC peak and DC value are given for the load voltage and continuous load current. Note: To order tape packaging for Relays with surface-mounting terminals, add “(TR)” to the end of the model number. Small and Highload-voltage Contact form Low-output-capacitance and Low-ON-resistance ■Ordering Information Package Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength RoHS Compliant AC for 1 min Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. 71 High-load-voltage Input General-purpose Item Symbol G3VM-201G G3VM-201G1 G3VM-201G2 G3VM-S5 Minimum 1.0 1.1 1.0 Typical 1.15 1.27 1.15 Maximum 1.3 1.4 1.3 Unit Measurement conditions Multi-contact-pair High-current and Small and High(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength LED forward voltage VF Reverse current IR Maximum 10 μA VR=5 V Capacitance between terminals CT Typical 30 pF V=0, f=1 MHz Trigger LED forward current IFT mA G3VM-201G : IO=50 mA G3VM-201G1/201G2/S5 : IO=200 mA Release LED forward current IFC mA IOFF=100 μA Maximum resistance with output ON RON Current leakage when the relay is open ILEAK Capacitance between terminals COFF Capacitance between I/ O terminals CI-O Insulation resistance between I/O terminals RI-O Typical 1 0.4 − 1 Maximum 3 1 0.2 3 Minimum 0.1 − 0.1 Typical − 0.001 − Typical 40 5 Maximum 50 8 Typical − Maximum 1 Typical 15 Maximum 20 Typical 3 3.5 0.6 Maximum 0.5 8 10 1.5 Typical − 0.6 1 0.1 Maximum 0.2 3 5 1 Current-limiting Low-output-capacitance and Low-ON-resistance − High-dielectricstrength 3 RL 108 Typical Note: 2. Turn-ON and Turn-OFF Times 4 100 − 0.8 tOFF 2 90 1000 Turn-OFF time 1 1,000 Typical tON IF − 1 Minimum Turn-ON time Small and Highload-voltage Certified Models with Standards Certification DIP SOP SSOP USOP VSON MOS FET Relays ■Electrical Characteristics (Ta = 25°C) Output Introduction G3VM-201G@/S5 V IF=10 mA Ω G3VM-201G/S5: IF=5 mA, IO=Continuous load current ratings G3VM-201G1 : IF=2 mA, IO=200 mA G3VM-201G2 : IF=0.5 mA, IO=200 mA, t < 1s nA G3VM-201G : VOFF=160 V G3VM-201G1/201G2/S5 : VOFF=200 V pF G3VM-201G : V=0, f=1 MHz, t < 10s G3VM-201G1/201G2/S5 : V=0, f=1 MHz pF f=1 MHz, VS=0 V MΩ VI-O=500 VDC, ROH≤60% ms G3VM-201G/S5 : IF=5 mA, RL=200 Ω, VDD=20 V (See note 2.) G3VM-201G1 : IF=2 mA, RL=200 Ω, VDD=20 V (See note 2.) G3VM-201G2 : IF=0.5 mA, RL=200 Ω, VDD=20 V (See note 2.) VDD VOUT IF VOUT 90% 10% t ON t OFF ■Recommended Operating Conditions For usage with high reliability, Recommended Operation Conditions is a measure that takes into account the derating of Absolute Maximum Ratings and Electrical Characteristics. Each item on this list is an independent condition, so it is not simultaneously satisfy several conditions. Item Symbol Load voltage (AC peak/DC) VDD G3VM-201G@/S5 Operating LED forward current IF Continuous load current (AC peak/DC) IO Ambient operating temperature Ta G3VM-201G Maximum Minimum 5 Typical 7.5 Maximum 15 Maximum 40 − 2 160 -20 65 4.0 Clearance distances 4.0 Internal isolation thickness 0.1 Unit mm Unit 200 V 7.5 mA 25 Minimum Minimum G3VM-S5 5 0.5 Maximum Creepage distances 72 G3VM-201G2 160 ■Spacing and Insulation Item G3VM-201G1 130 °C MOS FET Relays G3VM-201G/201G1/S5 50 40 G3VM-201G2 20 -40 -20 0 150 100 250 G3VM-S5 G3VM-201G 0 20 40 60 80 100 Ambient temperature Ta (°C) RON - Ta 0 -50 40 30 1.4 1.6 RON - Ta 10 25 20 15 (Average value) G3VM-201G1: IO=200mA, IF=2mA, t<1s G3VM-201G2: IO=200mA, IF=0.5mA, t<1s G3VM-S5: IO=200mA, IF=5mA, t<1s 9 8 7 G3VM-201G1 G3VM-S5 6 5 4 G3VM-201G2 3 10 2 G3VM-201G1/201G2 -2 -1.5 -1 -0.5 0 0.5 1 1.5 1 0 -40 2 -20 0 20 On-state voltage VON (V) 2 G3VM-S5 G3VM-201G 1 G3VM-201G2 0 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (°C) -20 0 20 tON, tOFF - IF 10 tON 1 G3VM-201G 0.1 tOFF G3VM-S5 G3VM-201G: Ta=25°C, VDD=10V, RL=200Ω G3VM-S5: Ta=25°C, VDD=20V, RL=200Ω 0.001 0.1 1 10 60 80 100 G3VM-201G1/201G2 (Average value) tON 0.01 40 Ambient temperature Ta (°C) 100 LED forward current IF (mA) tON, tOFF - IF 10 tON tON (Average value) G3VM-201G1 tOFF 1 tOFF 0.1 G3VM-201G2 Ta=25°C VDD=20V RL=200Ω 0.01 0.1 1 10 100 LED forward current IF (mA) Certified Models with Standards Certification G3VM-201G1 0.5 -40 Small and Highload-voltage 1.5 0 100 ● Turn ON, Turn OFF time vs. LED forward current G3VM-201G/S5 (Average value) G3VM-201G: IO=50mA, t<1s G3VM-201G1/201G2/S5: IO=200mA, t<1s 80 Ambient temperature Ta (°C) Turn ON, Turn OFF time tON, tOFF (ms) IFT - Ta 60 Low-output-capacitance and Low-ON-resistance ● Trigger LED forward current vs. Ambient temperature 40 Current-limiting 5 -200 Turn ON, Turn OFF time tON, tOFF (ms) -150 Trigger LED forward current IFT (mA) 1.2 G3VM-201G1/201G2/S5 -100 -250 1 LED forward voltage VF (V) (Average value) IO=50mA IF=5mA t<1s 35 0.8 High-dielectricstrength 50 G3VM-201G1 (Average value) 100 G3VM-201G2 1 0.1 ● On-state resistance vs. Ambient temperature G3VM-201G G3VM-201G/S5: Ta=25°C, IF=5mA 200 G3VM-201G1: Ta=25°C, IF=2mA 150 G3VM-201G2: Ta=25°C, IF=1mA, t<1s G3VM-201G G3VM-S5 10 G3VM-201G -40 -20 On-state resistance RON (Ω) IO - VON (Average value) Ta=25°C 0 20 40 60 80 100 Ambient temperature Ta (°C) ● Continuous load current vs. On-state voltage Continuous load current IO (mA) 200 IF - VF 100 On-state resistance RON (Ω) 0 G3VM-201G1/201G2/S5 50 10 (Maximum value) Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength 30 IO - Ta 250 LED forward current IF (mA) (Maximum value) 60 ● LED forward current vs. LED forward voltage High-load-voltage LED forward current IF (mA) IF - Ta ● Continuous load current vs. Ambient temperature Continuous load current IO (mA) ● LED forward current vs. Ambient temperature General-purpose ■Engineering Data Introduction G3VM-201G@/S5 DIP SOP SSOP USOP VSON G3VM-201G@/S5 73 MOS FET Relays G3VM-201G: VDD=10V, RL=200Ω, IF=5mA G3VM-S5: VDD=20V, RL=200Ω, IF=5mA G3VM-S5 1 Multi-contact-pair High-current and Small and High(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength tON G3VM-201G tON tOFF tOFF 0.1 0.01 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (°C) ● Current leakage vs. Load voltage G3VM-201G2 ILEAK - VOFF (Average value) 0.5 Ta=25°C 0.4 High-dielectricstrength 0.3 0.2 Current-limiting Low-output-capacitance and Low-ON-resistance 0.1 0 0 50 100 150 200 Load voltage VOFF (V) Small and Highload-voltage Certified Models with Standards Certification DIP SOP SSOP USOP VSON G3VM-201G@/S5 74 tON, tOFF - Ta (Average value) Turn ON, Turn OFF time tON, tOFF (ms) High-load-voltage tON, tOFF - Ta 10 ● Current leakage vs. Ambient temperature G3VM-201G1/201G2 10 (Average value) tON tON 1 tOFF G3VM-201G1 G3VM-201G2 0.1 ILEAK - Ta Current leakage ILEAK (nA) ● Turn ON, Turn OFF time vs. Ambient temperature G3VM-201G/S5 Turn ON, Turn OFF time tON, tOFF (ms) General-purpose ■Engineering Data Current leakage ILEAK (nA) Introduction G3VM-201G@/S5 100 (Average value) VOFF=200V 10 G3VM-S5 1 G3VM-201G2 G3VM-201G 0.1 tOFF 0.01 G3VM-201G1: VDD=20V, RL=200Ω, IF=2mA G3VM-201G2: VDD=20V, RL=200Ω, IF=0.5mA 0.01 -40 -20 0 20 40 60 80 G3VM-201G1 0.001 100 Ambient temperature Ta (°C) -40 -20 0 20 40 60 80 100 Ambient temperature Ta (°C) MOS FET Relays ●Appearance General-purpose ■Appearance / Terminal Arrangement / Internal Connections ●Terminal Arrangement/Internal Connections (Top View) SOP (Small Outline Package) High-load-voltage SOP 4-pin Mold pin mark (See note 3.) OMRON logo Pin 1 mark 932 Introduction G3VM-201G@/S5 Model name (See note 2.) LOT.NO. ■Dimensions (Unit: mm) Surface-mounting Terminals Actual Mounting Pad Dimensions Weight: 0.1 g (Recommended Value, Top View) 4.4±0.25 3.9±0.2 6 to 6.3 2.1 max. 1.2 High-dielectricstrength 0.15 0.8 0.4±0.1 0.1±0.1 0.6±0.3 2.54 7.0±0.4 2.54±0.25 Current-limiting Note: The actual product is marked differently from the image shown here. ■Approved Standards Contact form File No. UL (recognized) 1a (SPST-NO) E80555 Low-output-capacitance and Low-ON-resistance UL recognized Approved Standards Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength Note: 1. The actual product is marked differently from the image shown here. Note: 2. “G3VM” does not appear in the model number on the Relay. Note: 3. The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. Small and Highload-voltage ■Safety Precautions • Refer to the Common Precautions for All MOS FET Relays for precautions that apply to all MOS FET Relays. Certified Models with Standards Certification DIP SOP SSOP USOP VSON G3VM-201G@/S5 75