Introduction MOS FET Relays General-purpose G3VM-601G@ SOP 4-pin, High-load-voltage Type High-load-voltage MOS FET Relays in SOP 4-pin packages for high load voltages • Load voltage: 600 V Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength RoHS Compliant Note: The actual product is marked differently from the image shown here. ■Application Examples • Semiconductor test equipment • Various battery-driven devices • Power circuit • Test & Measurement equipment • Security equipment • Amusement equipment • Communication equipment • Industrial equipment ■Package (Unit : mm, Average) ■Model Number Legend High-dielectricstrength G3V M- @ @ @ @ SOP 4-pin 1 2 3 4 3.9 1. Load Voltage 60 : 600 V 2.1 4.4 2. Contact form 1 : 1a (SPST-NO) 3. Package G : SOP 4-pin Current-limiting 4. Other informations When specifications overlap, serial code is added in the recorded order. Note: The actual product is marked differently from the image shown here. Stick packaging Contact form Terminals SOP4 1a (SPST-NO) Surface-mounting Terminals Load voltage Continuous load current (peak value) * (peak value) * 600 V Model 70 mA G3VM-601G1 90 mA G3VM-601G Minimum package quantity 100 pcs. Tape packaging Minimum package quantity Model G3VM-601G1(TR) G3VM-601G(TR) 2,500 pcs. * The AC peak and DC value are given for the load voltage and continuous load current. Note: To order tape packaging for Relays with surface-mounting terminals, add “(TR)” to the end of the model number. Item Input Symbol G3VM-601G1 G3VM-601G Unit LED forward current IF 30 50 mA Repetitive peak LED forward current IFP LED forward current reduction rate -0.3 A -0.5 mA/°C LED reverse voltage VR 5 V Connection temperature TJ 125 °C Load voltage (AC peak/DC) Continuous load current (AC peak/DC) ON current reduction rate Pulse ON current Connection temperature VOFF 600 70 90 mA ΔIO/°C -0.7 -0.9 mA/°C lop 210 270 mA Ta ≥ 25°C t=100 ms, Duty=1/10 125 °C Dielectric strength between I/O (See note 1.) VI-O 1500 Vrms Ambient operating temperature Ta -40 to +85 °C Tstg -55 to +125 °C With no icing or condensation − 260 °C 10 s Ambient storage temperature Soldering temperature DIP SOP SSOP USOP VSON Ta ≥ 25°C V IO TJ 100 μs pulses, 100 pps AC for 1 min Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. 87 G3VM-601G@ Output ΔIF/°C 1 Measurement conditions Certified Models with Standards Certification ■Absolute Maximum Ratings (Ta = 25°C) Small and Highload-voltage Package Low-output-capacitance and Low-ON-resistance ■Ordering Information MOS FET Relays Item Symbol G3VM-601G1 G3VM-601G High-load-voltage Minimum 1.1 1.0 Typical 1.27 1.15 Maximum 1.4 Unit V Measurement conditions IF=10 mA Multi-contact-pair High-current and Small and High(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength High-dielectricstrength LED forward voltage VF Reverse current IR Maximum 10 μA VR=5 V Capacitance between terminals CT Typical 30 pF V=0, f=1 MHz Trigger LED forward current IFT mA G3VM-601G1 : IO=70 mA G3VM-601G : IO=90 mA Release LED forward current IFC mA IOFF=100 μA Maximum resistance with output ON RON Current leakage when the relay is open ILEAK Capacitance between terminals COFF Typical 75 pF V=0, f=1 MHz Capacitance between I/O terminals CI-O Typical 0.8 pF f=1 MHz, VS=0 V Insulation resistance between I/O terminals RI-O Minimum 1000 Typical 108 MΩ VI-O=500 VDC, ROH≤60% Turn-ON time tON Typical 2 ms G3VM-601G1 : IF=0.5 mA, RL=200 Ω, VDD=10 V (See note 2.) G3VM-601G : IF=2 mA, RL=200 Ω, VDD=10 V (See note 2.) Input General-purpose ■Electrical Characteristics (Ta = 25°C) Output Introduction Current-limiting Low-output-capacitance and Low-ON-resistance Small and Highload-voltage Certified Models with Standards Certification DIP SOP SSOP USOP VSON G3VM-601G@ Turn-OFF time 1.3 Typical − 0.4 Maximum 0.2 1 Minimum − 0.1 Typical 0.001 − Typical 35 45 Maximum 60 Typical − 1 Maximum tOFF 1,000 Maximum 10 8 Typical 1 0.5 Maximum 5 3 Ω G3VM-601G1 : IF=0.5 mA, IO=70 mA, t < 1 s G3VM-601G : IF=2 mA, IO=90 mA nA VOFF=600 V Note: 2. Turn-ON and Turn-OFF Times IF 1 4 2 3 RL VDD VOUT IF VOUT 90% 10% t ON t OFF ■Recommended Operating Conditions For usage with high reliability, Recommended Operation Conditions is a measure that takes into account the derating of Absolute Maximum Ratings and Electrical Characteristics. Each item on this list is an independent condition, so it is not simultaneously satisfy several conditions. Item Symbol Load voltage (AC peak/DC) VDD Operating LED forward current IF Continuous load current (AC peak/DC) IO Ambient operating temperature Ta G3VM-601G1 Maximum Typical 0.5 Maximum Maximum -20 65 G3VM-601G@ Minimum 4.0 4.0 Internal isolation thickness 0.1 88 Unit mm mA 70 Minimum Clearance distances V 25 Maximum Creepage distances Unit 2 60 ■Spacing and Insulation Item G3VM-601G 480 °C MOS FET Relays G3VM-601G 50 40 20 40 0 20 40 60 80 100 Ambient temperature Ta (°C) ● Continuous load current vs. On-state voltage IO - VON G3VM-601G1 : Ta=25°C, IF=1mA, t<1s 80 G3VM-601G : Ta=25°C, IF=2mA 60 40 G3VM-601G1 20 -20 0 10 G3VM-601G1 1 -20 -40 60 50 G3VM-601G1 40 G3VM-601G 30 20 -3 -2.5 -2 -1.5 -1 -0.5 0 0.5 1 1.5 2 2.5 3 -20 0 20 1 10 100 LED forward current IF (mA) ● Current leakage vs. Load voltage G3VM-601G1 ILEAK - VOFF 0.4 0.2 G3VM-601G1 -20 0 20 10 (Average value) G3VM-601G1 tON 1 tOFF G3VM-601G tOFF -20 0 20 40 60 60 80 100 ● Current leakage vs. Ambient temperature G3VM-601G1 : VDD=10V, RL=200Ω, IF=0.5mA G3VM-601G : VDD=10V, RL=200Ω, IF=2mA 0.1 -40 40 Ambient temperature Ta (°C) 80 100 Ambient temperature Ta (°C) ILEAK - Ta 100 (Average value) VOFF=600V 10 1 G3VM-601G 0.1 G3VM-601G1 0.01 -40 -20 0 20 40 60 80 100 Ambient temperature Ta (°C) Certified Models with Standards Certification tON Turn ON, Turn OFF time tON, tOFF (ms) G3VM-601G 0.4 0 -40 100 G3VM-601G Small and Highload-voltage tOFF 0.1 0.01 0.1 tON, tOFF - Ta (Average value) G3VM601G1 80 ● Turn ON, Turn OFF time vs. Ambient temperature VDD=10V, RL=200Ω, Ta=25°C 1 60 0.6 (Average value) Low-output-capacitance and Low-ON-resistance tON, tOFF - IF 10 IFT - Ta IO=Continuous Load Current Ratings t<1s Ambient temperature Ta (°C) On-state voltage VON (V) ● Turn ON, Turn OFF time vs. LED forward current 40 1.2 1.4 LED forward voltage VF (V) Current-limiting 0 -40 1 (Average value) G3VM-601G1 : IO=70mA, IF=0.5mA, t<1s G3VM-601G : IO=90mA, IF=2mA, t<1s 10 G3VM-601G 0.8 High-dielectricstrength 0 -80 Turn ON, Turn OFF time tON, tOFF (ms) (Average value) G3VM-601G ● Trigger LED forward current vs. Ambient temperature RON - Ta -60 DIP SOP SSOP USOP VSON (Average value) Ta=25°C 0.3 G3VM-601G@ Current leakage ILEAK (nA) Ta=25°C 0.1 20 40 60 80 100 Ambient temperature Ta (°C) ● On-state resistance vs. Ambient temperature (Average value) 100 -40 Trigger LED forward current IFT (mA) 0 Current leakage ILEAK (nA) -20 On-state resistance RON (mΩ) 0 -40 Continuous load current IO (mA) G3VM-601G1 100 20 10 -100 80 60 IF - VF (Maximum value) G3VM-601G Small and HighMulti-contact-pair High-current and (2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength G3VM-601G1 30 IO - Ta 100 LED forward current IF (mA) (Maximum value) 60 ● LED forward current vs. LED forward voltage High-load-voltage LED forward current IF (mA) IF - Ta ● Continuous load current vs. Ambient temperature Continuous load current IO (mA) ● LED forward current vs. Ambient temperature General-purpose ■Engineering Data Introduction G3VM-601G@ 0.2 0.1 0 0 100 200 300 400 500 600 Load voltage VOFF (V) 89 Introduction G3VM-601G@ MOS FET Relays General-purpose ■Appearance / Terminal Arrangement / Internal Connections ●Appearance ●Terminal Arrangement/Internal Connections (Top View) SOP (Small Outline Package) High-load-voltage SOP 4-pin Mold pin mark (See note 3.) OMRON logo Pin 1 mark 932 Model name (See note 2.) LOT.NO. Multi-contact-pair High-current and Small and High(2a, 2b, and 1a1b) Low-ON-resistance dielectric-strength Note: 1. The actual product is marked differently from the image shown here. Note: 2. “G3VM” does not appear in the model number on the Relay. Note: 3. The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. ■Dimensions (Unit: mm) Surface-mounting Terminals Actual Mounting Pad Dimensions Weight: 0.1 g (Recommended Value, Top View) 4.4±0.25 3.9±0.2 6 to 6.3 2.1 max. 1.2 High-dielectricstrength 0.15 0.8 0.4±0.1 0.1±0.1 0.6±0.3 7.0±0.4 2.54 2.54±0.25 Current-limiting Low-output-capacitance and Low-ON-resistance Note: The actual product is marked differently from the image shown here. Small and Highload-voltage ■Safety Precautions ■Approved Standards UL recognized Approved Standards Contact form File No. UL (recognized) 1a (SPST-NO) E80555 • Refer to the Common Precautions for All MOS FET Relays for precautions that apply to all MOS FET Relays. Certified Models with Standards Certification DIP SOP SSOP USOP VSON G3VM-601G@ 90