THE WORLD OF DC/DC-CONVERTERS www.peak-electronics.de Tel. +49 ( 0 ) 6135 7026-0 [email protected] P6CUI-xxxxZ(H30)LF (SIP7) P6DUI–xxxxZ(H30)LF (DIP14) PM1-SERIES Rev. 07-2015 1 Watt Unregulated Dual Separate Output SIP7 or DIP14 Case 1-3 kV DC I/O Isolation Low Ripple and Noise The PM1 series is a family of cost effective 0.5 – 1W single/dual output DC/DC converters. They are encapsulated in an ultra miniature SIP7 (PxCU/LU…) or DIP14 (PxDU/MU…) case. High performance features: 1000-6000Vdc input/output isolation, high efficiency operation, output voltage accuracy of ±3% maximum, input range of ±10% and low output ripple and noise. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Output Specifications Voltage Range ±10% Current max. 50 – 266mA (See table) 8 – 25mA (See table) Current No-Load Filter Capacitors Reflected Ripple Current 20mA pk-pk (@12uH) Voltage accuracy ±3% Line regulation ±1.2% (per 1% Vin change) Load regulation ( 20% to 100% ) ±10%,max. (for 3.3Vout) Ripple & noise (20 MHz bandwidth) 75 mV pk-pk Temperature coefficient Capacitor load General Specifications Efficiency Isolation I/O 57% - 82% (60 sec) 1000VDC 3000VDC Switching Frequency Humidity MTBF Safety Standard (designed to meet) 100uF (Test: min. Vin + const. load) (P6CUI/DUI-xxxxELF) (P6CUI/DUI-xxxxEH30LF) 60 pF 1000 MΩ 80 kHz (variable) .) 95% (rel.) (Calculated MIL-HDBK-217F) ±0.02%/°C (See table) Isolation I/O Capacitance Isolation I/O Resistance ±20%,max. Environment / Physical Specifications Operation Temp. -40°C to 85°C (Derating) Case max. 100°C Storage -40°C to 125°C Cooling >1.121 Mhrs Case Material IEC 60950-1 Potting Pin Material Nature / Free Air Plastic (UL94V-0 rated) Epoxy (UL94V-0 rated) Alloy42 (Solder coated) Weight PM1-Series – P6CUI / P6DUI –Dual Separate Output – SIP7 - Plastic Case Specification can change without a notice - We accept no liability for any inaccuracy or printing errors. Page 1/3 2.3 g (SIP7) 2.6 g (DIP14) THE WORLD OF DC/DC-CONVERTERS Order # ) ) A) (mA mA ( m d ( a d ) o d a ll L DC C) Loa l Lo t Fu (VD e (V No Ful ) n g t t e e a n n r g (% ur olt rre rre lta tV tC ncy Vo Cu Cu u u e t t t i p p c u u u t t i Inp Inp Inp Ou Ou Eff DUAL SEPARATE OUTPUT P6CUI/DUI-05053R3ZLF 5 25 259 5, 3.3 100, 152 77 P6CUI/DUI-05057R2ZLF 5 25 266 5, 7.2 100, 69 75 P6CUI/DUI-050509ZLF 5 25 259 5, 9 100, 56 77 P6CUI/DUI-050512ZLF 5 25 259 5, 12 100, 42 77 P6CUI/DUI-050515ZLF 5 25 256 5, 15 100, 33 78 P6CUI/DUI-057R218ZLF 5 24 251 7.2, 18 100, 10 74 P6CUI/DUI-12053R3ZLF 12 15 106 5, 3.3 100, 152 78 P6CUI/DUI-12057R2ZLF 12 15 111 5, 7.2 100, 69 75 P6CUI/DUI-120509ZLF 12 15 108 5, 9 100, 56 77 P6CUI/DUI-120512ZLF 12 15 92 5, 12 100, 42 80 P6CUI/DUI-120515ZLF 12 15 106 5, 15 100, 33 78 P6CUI/DUI-24053R3ZLF 24 8 55 5, 3.3 100, 152 75 P6CUI/DUI-24057R2ZLF 24 8 55 5, 7.2 100, 69 75 P6CUI/DUI-240509ZLF 24 8 54 5, 9 100, 56 77 P6CUI/DUI-240512ZLF 24 8 53 5, 12 100, 42 78 P6CUI/DUI-240515ZLF 24 8 53 5, 15 100, 33 78 P6CUI/DUI-050505ZLF 5 25 266 5, 5 100, 100 75 P6CUI/DUI-057R27R2ZLF 5 25 259 7.2, 7.2 69, 69 77 P6CUI/DUI-050909ZLF 5 25 253 9, 9 56, 56 79 P6CUI/DUI-051212ZLF 5 25 250 12, 12 42, 42 80 P6CUI/DUI-051515ZLF 5 25 243 15, 15 33, 33 82 P6CUI/DUI-120505ZLF 12 15 111 5, 5 100, 100 75 P6CUI/DUI-127R27R2ZLF 12 15 108 7.2, 7.2 69, 69 77 P6CUI/DUI-120909ZLF 12 15 108 9, 9 56, 56 77 P6CUI/DUI-121212ZLF 12 15 104 12, 12 42, 42 80 P6CUI/DUI-121515ZLF 12 15 102 15, 15 33, 33 81 P6CUI/DUI-240505ZLF 24 8 55 5, 5 100, 100 75 P6CUI/DUI-247R27R2ZLF 24 8 54 7.2, 7.2 69, 69 77 P6CUI/DUI-240909ZLF 24 8 52 9, 9 56, 56 79 P6CUI/DUI-241212ZLF 24 8 50 12, 12 42, 42 82 P6CUI/DUI-241515ZLF 24 8 50 15, 15 33, 33 82 If you need other specifications, please enquire. How to Order: Standard 1kV Isolation SIP Case P6CUI-xxxxZLF Standard 1kV Isolation DIP Case P6DUI-xxxxZLF Optional 3kV Isolation SIP Case P6CUI-xxxxZH30LF Optional 3kV Isolation DIP Case P6DUI-xxxxZH30LF PM1-Series – P6CUI / P6DUI –Dual Separate Output – SIP7 - Plastic Case Specification can change without a notice - We accept no liability for any inaccuracy or printing errors. Page 2/3 THE WORLD OF DC/DC-CONVERTERS 0.25 (0.01) Package / Pinning / Derating 1.25 (0.05) 2.1 (0.9) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. 0.50 (0.02) 0.50 (0.02) 6.00* (0.24) 19.50 (0.76) * The thickness of 48Vin voltage is 7.20(0.28) 10.00 (0.39) PEAK 3.00 (0.12) Modelcode Datecode 2 4 2.54 (0.10) 6 5 7 0.50 (0.02) 1 15.24 (0.60) 7.62 (0.30) 1 7 All dimensions are typical in millimeters (inches). - Pin diameter: 1.0 +/-0.05 (0.04 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. Bottom View 8 14 0.50 (0.02) 2.54 (0.10) P6CUI (SIP7) # DUAL Sep. 1 +Vin 2 -Vin 4 +V1out 5 -V1out 6 +V2out 7 -V2out 0.25 (0.01) 15.24 (0.60) SIP 7 – PLASTIC CASE PIN CONNECTIONS Model DIP14 – PLASTIC CASE 6.88 (0.27) AK 10.16 (0.40) PE Modelcode Datecode 20.32 (0.80) 3.00 (0.12) PIN CONNECTIONS Model P6DUI (DIP14) # DUAL Sep. 1 -Vin 7 NC 8 -V2out 9 +V2out 10 -V1out 11 +V1out 14 +Vin others no Pin OUTPUT POWER TEMPERATURE DERATING GRAPH 100% App Notes: 75% - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. 50% 25% 85 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE (°C) PM1-Series – P6CUI / P6DUI –Dual Separate Output – SIP7 - Plastic Case Specification can change without a notice - We accept no liability for any inaccuracy or printing errors. Page 3/3