TDCG10..m, TDCR10..m, TDCY10..m www.vishay.com Vishay Semiconductors Clock Display FEATURES • High efficient AlInGAP technology • Dark surface, white segments • Common anode (TDC.1050m) • Common cathode (TDC.1060m) • Multiplex mode • Recommended viewing distance up to 7 m • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 16770 APPLICATIONS • Clock modules for video/audioequipment, instrumentation, set top boxes DESCRIPTION Four digit display, with 10 mm digit charactersize. Designed as clock display with active colon between digit two and three. PRODUCT GROUP AND PACKAGE DATA • Product group: Display • Package: 10 mm clock • Product series: Standard • Angle of half intensity: ± 50° PARTS TABLE PART COLOR LUMINOUS INTENSITY (μcd) MIN. TYP. WAVELENGTH at at FORWARD VOLTAGE at (nm) (V) IF IF IF MAX. (mA) MIN. TYP. MAX. (mA) MIN. TYP. MAX. (mA) CIRCUITRY TDCG1050m Green 2800 4000 - 10 562 573 575 20 - 2 2.4 20 Common anode TDCG1060m Green 2800 4000 - 10 562 573 575 20 - 2 2.4 20 Common cathode TDCR1050m Red 4000 6000 - 10 - 631 - 20 - 2 2.4 20 Common anode TDCR1060m Red 4000 6000 - 10 - 631 - 20 - 2 2.4 20 Common cathode TDCY1050m Super yellow 4000 8000 - 10 - 589 - 20 - 2 2.4 20 Common anode TDCY1060m Super yellow 4000 8000 - 10 - 589 - 20 - 2 2.4 20 Common cathode ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TDCG1050m, TDCG1060m, TDCR1050m, TDCR1060m, TDCY1050m, TDCY1060m PARAMETER SYMBOL VALUE Reverse voltage per segment VR 5 V DC forward current per segment IF 25 mA IFM 160 mA PV 60 mW Peak forward current per segment Power dissipation TEST CONDITION Duty 1/10 at 1 kHz UNIT Operating temperature range Tamb - 40 to + 85 °C Storage temperature range Tstg - 40 to + 100 °C Soldering temperature Tsd 260 ± 5 °C Rev. 1.6, 17-Apr-13 Document Number: 83180 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TDCG10..m, TDCR10..m, TDCY10..m www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TDCG1050m, TDCG1060m, GREEN PARAMETER TEST CONDITION IF = 2 mA Luminous intensity per segment (1) IF = 10 mA IF = 2 mA Luminous intensity of colon IF = 10 mA PART TDCG1050m TDCG1060m TDCG1050m TDCG1060m TDCG1050m TDCG1060m TDCG1050m TDCG1060m SYMBOL MIN. TYP. MAX. UNIT IV - 1000 - μcd IV 2800 4000 - μcd IV - 200 - μcd IV 500 1200 - μcd Dominant wavelength IF = 20 mA d 562 573 575 nm Peak wavelength IF = 20 mA p - 575 - nm Spectral bandwidth IF = 20 mA - 20 - nm Forward voltage per segment or DP IF = 20 mA VF - 2 2.4 V Reverse current per segment or DP VR = 5 V IR - - 10 μA TDCG1050m, TDCG1060m Note (1) I Vmin. and IV groups are mean values of all segments (a to g, D1 to D4), matching factor within segments is 0.5, excluding decimal points and colon. OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TDCR1050m, TDCR1060m, RED PARAMETER TEST CONDITION IF = 2 mA Luminous intensity per segment (1) IF = 10 mA IF = 2 mA Luminous intensity of colon IF = 10 mA PART TDCR1050m TDCR1060m TDCR1050m TDCR1060m TDCR1050m TDCR1060m TDCR1050m TDCR1060m SYMBOL MIN. TYP. MAX. UNIT IV - 1500 - μcd IV 4000 6000 - μcd IV - 400 - μcd IV 500 800 - μcd Dominant wavelength IF = 20 mA d - 631 - nm Peak wavelength IF = 20 mA p - 639 - nm Spectral bandwidth IF = 20 mA - 20 - nm Forward voltage per segment or DP IF = 20 mA VF - 2 2.4 V Reverse current per segment or DP VR = 5 V IR - - 10 μA TDCR1050m, TDCR1060m Note (1) I Vmin. and IV groups are mean values of all segments (a to g, D1 to D4), matching factor within segments is 0.5, excluding decimal points and colon. Rev. 1.6, 17-Apr-13 Document Number: 83180 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TDCG10..m, TDCR10..m, TDCY10..m www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TDCY1050m, TDCY1060m, SUPER YELLOW PARAMETER TEST CONDITION IF = 2 mA Luminous intensity per segment (1) IF = 10 mA IF = 2 mA Luminous intensity of colon IF = 10 mA PART TDCY1050m TDCY1060m TDCY1050m TDCY1060m TDCY1050m TDCY1060m TDCY1050m TDCY1060m SYMBOL MIN. TYP. MAX. UNIT IV - 1500 - μcd IV 4000 8000 - μcd IV - 400 - μcd IV 500 1000 - μcd Dominant wavelength IF = 20 mA d - 589 - nm Peak wavelength IF = 20 mA p - 591 - nm Spectral bandwidth IF = 20 mA - 15 - nm Forward voltage per segment or DP IF = 20 mA VF - 2 2.4 V Reverse current per segment or DP VR = 5 V IR - - 10 μA TDCY1050m, TDCY1060m Note (1) I Vmin. and IV groups are mean values of all segments (a to g, D1 to D4), matching factor within segments is 0.5, excluding decimal points and colon. PINNING 16715 Rev. 1.6, 17-Apr-13 Document Number: 83180 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TDCG10..m, TDCR10..m, TDCY10..m www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 16764 Rev. 1.6, 17-Apr-13 Document Number: 83180 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VISHAY Display-10 mm Clock Multiplex Vishay Semiconductors Display-10 mm Clock Multiplex Package Dimensions in mm 16764 Document Number 83926 Rev. 1.1, 25-Mar-04 www.vishay.com 1 Display-10 mm Clock Multiplex VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 www.vishay.com 2 Document Number 83926 Rev. 1.1, 25-Mar-04 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000