UNISONIC TECHNOLOGIES CO., LTD PZT2907A Preliminary PNP SILICON TRANSISTOR PNP GENERAL PURPOSE AMPLIFIER DESCRIPTION This UTC PZT2907A is designed for use as a general purpose amplifier and switch requiring collector currents to 600 mA. ORDERING INFORMATION Ordering Number Lead Free Halogen Free PZT2907AL-AA3-R PZT2907AG-AA3-R www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd Package SOT-223 Pin Assignment 1 2 3 B C E Packing Tape Reel 1 of 4 QW-R207-023.d PZT2907A Preliminary PNP SILICON TRANSISTOR ABSOLUTE MAXIMUM RATING (Ta=25°С unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Collector-Emitter Voltage VCEO -60 V Collector-Base Voltage VCBO -60 V Emitter-Base Voltage VEBO -5 V Collector Current Continuous IC -600 mA Power Dissipation PD 1.3 W Junction Temperature TJ +150 °С Storage Temperature TSTG -55 ~ +150 °С Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Mounted on PCB with 3mm copper at each terminal THERMAL DATA PARAMETER Thermal Resistance Note: Mounted on PCB with 3mm copper at each terminal SYMBOL θJA RATINGS 90 UNIT ℃/W ELECTRICAL CHARACTERISTICS (Ta=25°С, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage (Note) BVCEO IC=-10mA, IB=0 Collector-Base Breakdown Voltage BVCBO IC=-10μA, IE=0 Emitter-Base Breakdown Voltage BVEBO IE=-10μA , IC=0 VCB=-30V, VEB=-0.5V Base Cutoff Current IB VCE=-30V, VBE=-0.5V Collector Cutoff Current ICEX VCB=-50V, IE=0 Collector Cutoff Current ICBO VCB=-50V, IE=0, TA=150°С MIN TYP MAX UNIT -60 -60 -5 -50 -50 -0.02 -20 V V V nA nA μA μA ON CHARACTERISTICS DC Current Gain hFE Collector-Emitter Saturation Voltage (Note) VCE(SAT) Base-Emitter Saturation Voltage VBE(SAT) IC=-0.1mA, VCE=-10V IC=-1.0 mA, VCE=-10V IC=-10 mA, VCE=-10V IC=-150 mA, VCE=-10V (Note) IC=-500 mA, VCE=-10V (Note) IC=-150 mA, IB=-15mA IC=-500 mA, IB=-50mA IC=-150 mA, IB=-15mA (Note) IC=-500 mA, IB=-50mA SMALL SIGNAL CHARACTERISTICS Current Gain – Bandwidth Product fT IC=-50mA, VCE=-20V, f=100MHz Output Capacitance Cob VCB=-10V, IE=0, f=100kHz Input Capacitance Cib VEB=-2V, IC=0, f=100kHz SWITCHING CHARACTERISTICS Turn-on Time tON VCC=30V, IC=-150mA, Delay Time tDLY IB1=-15mA Rise Time tR Turn-off Time tOFF VCC=6V, IC=-150mA, Storage Time tS IB1= IB2=-15mA Fall Time tF Note: Pulse Test: Pulse Width ≤ 300ms, Duty Cycle≤2.0% UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 75 100 100 100 50 300 -0.4 -1.6 -1.3 -2.6 V V V V 8 30 MHz pF pF 45 10 40 100 80 30 ns ns ns ns ns ns 200 2 of 4 QW-R207-023.d PZT2907A Preliminary PNP SILICON TRANSISTOR TEST CIRCUITS UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 4 QW-R207-023.d PZT2907A Preliminary PNP SILICON TRANSISTOR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R207-023.d