UNISONIC TECHNOLOGIES CO., LTD MBR10150C DIODE HIGH VOLTAGE POWER SCHOTTKY RECTIFIER DESCRIPTION The UTC MBR10150C is a high voltage dual schottky rectifier, providing the designers with high current capacity and guard-ring for stress protection. The UTC MBR10150C is suitable for medium voltage operation and high frequency circuits where low switching losses and low noise are required FEATURES * High surge capacity * Low Forward Voltage * Guard-ring for stress protection SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MBR10150CL-TA3-T MBR10150CG-TA3-T MBR10150CL-TF1-T MBR10150CG-TF1-T MBR10150CL-TF2-T MBR10150CG-TF2-T MBR10150CL-TF3-T MBR10150CG-TF3-T MBR10150CL-TQ2-T MBR10150CG-TQ2-T MBR10150CL-TQ2-R MBR10150CG-TQ2-R Note: Pin Assignment: A: Anode K: Cathode Package TO-220 TO-220F1 TO-220F2 TO-220F TO-263 TO-263 Pin Assignment 1 2 3 A K A A K A A K A A K A A K A A K A Packing Tube Tube Tube Tube Tube Tape Reel MARKING www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-039.E MBR10150C DIODE ABSOLUTE MAXIMUM RATINGS (PER LEG) PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VR 150 V Peak Repetitive Reverse Voltage VRRM Working Peak Reverse Voltage VRWM Average Rectified Forward Per Leg 5 A IO Current (Rated VR) TC=142°C Total 10 A Peak Repetitive Forward Current IFRM 10 A (Rated VR, Square Wave, 20 kHz) TC=142°C Non-Repetitive Peak Surge Current (Surge Applied At IFSM 100 A Rated Load Conditions Half Wave, Single Phase, 60Hz) Voltage Rate of Change (Rated VR) dv/dt 10000 V/µs Operating Junction Temperature (Note 2) TJ 150 °C Storage Temperature TSTG -55 ~ 150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. The heat generated must be less than the thermal conductivity from Junction-to-Ambient: dPD/dTJ<1/θJA. THERMAL CHARACTERISTICS (PER LEG) PARAMETER TO-220 TO-220F/TO-220F1 Typical Thermal Resistance TO-220F2 TO-263 SYMBOL RATINGS 2 UNIT °C/W θJC 4 °C/W 3 °C/W ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL TEST CONDITIONS IF=5.0A, TC=25°C Instantaneous Forward Voltage Drop VF IF=5.0A, TC=125°C Rated DC Voltage, TC=25°C Instantaneous Reverse Current IR Rated DC Voltage, TC=125°C Notes: Pulse Test: Pulse Width=300µs, Duty Cycle ≤ 2.0%. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 0.92 V 0.82 0.1 mA 15.0 2 of 3 QW-R601-039.E MBR10150C TYPICAL CHARACTERISTICS Typical Forward Characteristics Forward Derating Curve 100 12 Instantaneous Forward Current (A) DIODE 10 8 6 4 2 0 1.0 0.1 0 50 25 75 100 125 150 175 25°C 10 IF Pulse Width=300uS 0.2 0.4 0.6 0.8 1.0 Instantaneous Forward Voltage (V) Typical Reverse Characteristics 1E-1 1E-2 1E-3 1E-4 1E-5 1E-6 1E-7 VR=150V 25 50 75 100 125 150 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-039.E