UNISONIC TECHNOLOGIES CO., LTD MBR1060C DIODE SCHOTTKY BARRIER RECTIFIER DIODES 1 FEATURES TO-220 * Schottky Barrier Chip * Guard Ring Die Construction for Transient Protection * Low Power Loss, High Efficiency * High Surge Capability * High Current Capability and Low Forward Voltage Drop * For Use in Low Voltage, High Frequency Inverters, Free * Wheeling, and Polarity Protection Applications 1 TO-220F SYMBOL Lead-free: MBR1060CL Halogen-free: MBR1060CG ORDERING INFORMATION Ordering Number Normal Lead Free Halogen Free MBR1060C-TA3-T MBR1060CL-TA3-T MBR1060CG-TA3-T MBR1060C-TF3-T MBR1060CL-TF3-T MBR1060CG-TF3-T Note: Pin Assignment: A: Anode K: Cathode www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Ltd Package TO-220 TO-220F Pin Assignment 1 2 3 A K A A K A Packing Tube Tube 1 of 1 QW-R601-019,B MBR1060C DIODE ELECTRICAL CHARACTERISTICS RATINGS (Ta=25℃, unless otherwise specified) PARAMETER Maximum Repetitive Peak Reverse Voltage Maximum DC Blocking Voltage Working Peak Reverse Voltage Maximum PMS Reverse Voltage Average Forward Rectified Output Current (Note 1)(TC=105℃) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half-Sine-Wave Repetitive Peak Reverse Surge Current (tP≤ 2.0μs) IF=5.0A, TC=125℃ IF=5.0A, TC=25℃ Forward Voltage Drop IF=10A, TC=25℃ TC= 25℃ Peak Reverse Current at Rated DC Blocking Voltage TC=125℃ SYMBOL VRRM VR RATINGS 60 60 UNIT V V VRWM VR(RMS) 60 42 V V IOUT 10 A IFSM 125 A IRRM 1.0 0.70 0.80 0.95 0.1 A V V V mA 15 mA 150 -65 ~ +150 -65 ~ +150 pF ℃ ℃ VFM IRM Typical Junction Capacitance (Note 2) CJ Operating Temperature TJ Storage Temperature TSTG Notes: 1. Thermal resistance junction to case mounted heat sink. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. UTC assum es no responsibility for equipm ent failures that result from using products at v alues that exceed, ev en m om entarily, rated v alues (such as m axim um ratings, operating condition ranges, or other param eters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or system s where m alfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The inform ation presented in this docum ent does not form part of any quotation or contract, is believ ed to be accurate and reliable and m ay be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 2 QW-R601-019,B