Packing and Order Information www.vishay.com Vishay Semiconductors Packing and Order Information GENERAL INFORMATION Vishay offers LEDs and 7 Segment Displays with several packing options. In case of moisture absorption the device will recover to the former condition by drying under the following recommended conditions: 192 h at 40 °C + 5 °C and < 5 % RH DEVICE SERIES 7-Segment Display TELUX BULK TAPE BLISTER TUBE TAPE TD.. x TLW.. VLW.. x PLCC-2, PLCC-3, PLCC-4 VLM.3.. x PLCC-2 Plus VLM.51.. x Reverse Gullwing VLR.. x Pin Hole LED TL.. VL.. Mini Moisture level sticker Bar code ESD sticker label Aluminum bag Box x 0 x VLM.2.. x 0603 LED TLM.10., TLM.11. VLM.10., VLM.11., VLM.13. x 0402 LED VLM.15.. x Little Star VLM.7.. x All packing options are classified in terms of brightness (standard), color (optional), or forward voltage (optional). Reference for parameter selection codes is the chapter ”Classification of Components”, label code is SEL. Barcode Label Format Type: PTC - Assembly Location Code SEL - Parameter Selection Code DC - Date Code BN - Batch Number PCS - Quantity MN - Machine number Reel 18298 Example: CAUTION This bag contains MOISTURE-SENSITIVE DEVICES Dry box storage is recommended to prevent the parts from moisture absorption. The following conditions should be preserved if dry boxes are not available. Storage condition (example for JEDEC level 2, see table 2 “Assembly Instructions”): • max. 1 year: Temperature: 10 °C to 30 °C Humidity: 60 % RH max. • unlimited: Temperature: 10 °C to 30 °C Humidity: 20 % RH max. Rev. 1.4, 17-May-13 2 1. Shelf life in sealed bag: 12 months at < 40 °C and < 90 % relative humidity (RH) 2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. 220 °C) must be: nted within w 2a. Mounted 1 year at factory condition of ≤ 30 °C/60 % RH or 2b. Stored at ≤ 20 % RH 3. Devices require baking befor mounting if: Humidity Indicator Card is > 20 % when read at 23 °C ± 5 °C or 2a. or 2b. are not met. 4. If baking is required, devices may be baked for: 192 hours at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or 96 hours at 60 °C ± 5 °C and < 5 % RH for all device containers or 24 hours at 100 °C ± 5 °C not suitable for reels or tubes Bag Seal Date: (If blank, see barcode label) Drypacks Blister tapes are packed in anti-humidity aluminium bags to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant with moisture indicators. In cases of moisture absorption, the indicators change their color from blue to pink. LEVEL Note: Level defined by EIA JEDEC Standard JESD22-A112 19148-1 Fan Fold Packing Fan fold box is the standard containment for reel, tube, and bulk. Label format is identical to packing options as described above. Packing might contain tubes or reels with several parameter selection codes. In this case the label code of fan fold packing is SEL000. Exception: TELUX fan fold boxes contain one SEL code only. Minimum Order Quantity Packing Options describe the smallest physical packing unit. Vishay Sales representatives can provide information on the Minimum Order Quantity per type. Document Number: 80101 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packing and Order Information www.vishay.com Vishay Semiconductors MISSING COMPONENTS PACKAGE/PACKAGING Up to 3 consecutive components may be missing if the gap is followed by at least 6 components. A maximum of 0.5 % of the components per reel quantity may be missing. At least 5 empty positions are present at the start and the end of the tape to enable tape insertion. Tensile strength of the tape: 15 N Pulling force in the plane of the tape, at rectangular to the reel: 5 N Note • Shipment in fan-fold packages are standard for radial taped devices. Shipments in reel packing are only possible if the customer guarantees the removal of empty reels. According to a German packaging decree (Verpackungsverordnung) we are not able to accept the return of reels. 7-Segment Display TELUX PLCC-2, PLCC-3, PLCC-4 PLCC-2 Plus PLCC-2 Ultraviolet RGB Reverse Gullwing Mini 0603 LED 0402 LED Little Star 1.8 mm, 3 mm 5 mm Side View 7 mm 10 mm 13 mm Clock Module GS08 GS18 GS08 GS08 GS08 GS18 GS08 GS08 GS08 GS08 Bulk Reel Ammopack Bulk Reel Ammopack Bulk Ammopack QTY 500 pcs 400 pcs 400 pcs 384 pcs 2100 pcs 7500 (5 x 1500) pcs 8000 pcs 1000 pcs 2000 pcs 2050 pcs 2000 pcs 8000 pcs 3000 pcs 3000 pcs 9000 (3 x 3000) pcs 2000 pcs 5000 pcs 10 000 (5 x 2000) pcs 10 000 (5 x 2000) pcs 4000 pcs 5000 (5 x 1000) pcs 5000 (5 x 1000) pcs 2000 pcs 5000 (5x1000) pcs SPECIFICATION OF PACKING OPTIONS Pin Hole LED (TL.., VL..-series) Ammopack Reel 355 52 max. The tape is folded in concertina arrangement and laid in the cardboard box. If the components are required with the cathode before the anode (figure 4), the start of the tape should be taken from the side of the box marked “-”. If the components are required with the anode before cathode (figure 7), the tape should be taken from the side of the box marked “+”. 90 Tape feed direction Diodes: cathode before anode Transistors: collector before emitter 30 Identification label: Vishay/type/group/tape code/production code/quantity 48 45 948641 Fig. 1 - Reel Dimensions Label Tape Diodes: anode before cathode Phototransistors: emitter before collector Code 21 Tape feed direction Diodes: anode before cathode Transistors: emitter before collector Adhesive tape Identification label Reel Diodes: cathode before anode Phototransistors: collector before emitter Code 12 Paper Tape 948667-3 94 8671 Fig. 2 - LED in Tape Rev. 1.4, 17-May-13 Fig. 3 - Tape Direction Document Number: 80101 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packing and Order Information www.vishay.com Vishay Semiconductors OPTIONS TAPE DIMENSIONS FOR Ø 3 mm STANDARD PACKAGES Available Package Variations: 12, Z, 21 OPTION DIMENSION “H” DIMENSION “X” PREFERENCE 21.0 ± 0.5 tlur44 ±1 CS 22.0 ± 0.5 MS 25.5 ± 0.5 BT 20.0 ± 0.5 16.0 ± 0.5 DT 21.0 ± 0.5 16.0 ± 0.5 NT 21.5 ± 0.5 16.0 ± 0.5 GT 24.0 ± 0.5 16.0 ± 0.5 HT 24.0 ± 0.5 14.5 ± 0.5 MT 25.5 ± 0.5 16.0 ± 0.5 12.7 ± 1 ±2 Standard “H” LS “X” 20.0 ± 0.5 0.3 ± 0.2 19.7 ± 0.5 BS 9 ± 0.5 KS Standard +1 18.5 ± 0.5 12 ± 0.3 17.3 ± 0.5 VS 18 - 0.5 AS 3.81 ± 0.7 Explanation: Ø 4 ± 0.2 12 - cathode leaves first 5.08 ± 0.7 21 - anode leaves first 0.9 max. 0.6 5.08 + - 0.1 1.6 2.54 + - 0.1 6.35 ± 0.7 12.7 ± 0.2 Z - ammopack Quantity per: Measure limit over 20 index-holes: ± 1 Reel (Mat.-no. 1764) 2000 21885 Fig. 4 - Tape Dimensions Ø 3 mm Devices ORDER CODES The type designation of the device is extended by tape option codes. Distance between epoxy body and tape Spacing of lead frame A, B, C, M, G S: 2.54 mm T: 5.08 mm V Z: Ammopack Type Designation Code 12: Cathode leaves tape first 21: Anode leaves tape first Fig. 5 - Taping Code Example: VLME3100-GS08 TLHE4200-AS21 TLHE4200-ASZ optional since 1999: VLMS3100-GS18 Note • The new nomenclature for ammopack is ASZ only, without suffix for the LED orientation. The carton box has to be turned to the desired position: “+” for anode first, or “-“ for cathode first. AS12Z and AS21Z are still valid for already existing types, BUT NOT FOR NEW DESIGN. Rev. 1.4, 17-May-13 Document Number: 80101 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packing and Order Information www.vishay.com Vishay Semiconductors TAPE DIMENSIONS FOR Ø 5 mm STANDARD PACKAGES Available Package Variations: 12, Z, 21 OPTION DIMENSION “H” DIMENSION “X” PREFERENCE AS 17.3 ± 0.5 KS 19.7 ± 0.5 LS 21.0 ± 0.5 Standard CS 22.0 ± 0.5 MS 25.5 ± 0.5 Standard BT 20.0 ± 0.5 16.0 ± 0.5 DT 21.0 ± 0.5 16.0 ± 0.5 NT 21.5 ± 0.5 16.0 ± 0.5 GT 24.0 ± 0.5 16.0 ± 0.5 HT 24.0 ± 0.5 14.5 ± 0.5 MT 25.5 ± 0.5 16.0 ± 0.5 5mmstoff Explanation: 12 - cathode leaves first 21 - anode leaves first Z - ammopack Quantity per: Ammopack/reel (Mat.-No. 1764) 1000 948172_1 Fig. 6 - Tape Dimensions Ø 5 mm Devices ORDER CODES The type designation of the device is extended by tape option codes. Distance between epoxy body and tape Spacing of lead frame A, B, C, M, G S: 2.54 mm T: 5.08 mm V Z: Ammopack Type Designation Code 12: Cathode leaves tape first 21: Anode leaves tape first Fig. 7 - Taping Code Example: VLME3100-GS08 TLHE4200-AS21 TLHE4200-ASZ optional since 1999: VLMS3100-GS18 Note • The new nomenclature for ammopack is ASZ only, without suffix for the LED orientation. The carton box has to be turned to the desired position: “+” for anode first, or “-“ for cathode first. AS12Z and AS21Z are still valid for already existing types, BUT NOT FOR NEW DESIGN. Rev. 1.4, 17-May-13 Document Number: 80101 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packing and Order Information www.vishay.com Vishay Semiconductors TAPE DIMENSIONS FOR PLCC-2, PLCC-3, PLCC-4 (VLM.3-SERIES) REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 10.0 9.0 120° 948553 Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. Adhesive tape 4.5 3.5 2.5 1.5 Identification Label: Vishay type group tape code production code quantity 13.00 12.75 63.5 60.5 14.4 max. 180 178 94 8665 Blister tape Fig. 10 - Reel Dimensions - GS08 Component cavity REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFFERED 94 8670 TAPING OF VLM.3.. 3.5 3.1 2.2 2.0 4.5 3.5 5.75 5.25 3.6 3.4 4.0 3.6 4.1 3.9 Identification Label: Vishay type group tape code production code quantity 0.25 4.1 3.9 2.05 1.95 94 8668 Fig. 8 - Tape Dimensions in mm for PLCC-2 TAPING OF VLMD3100 13.00 12.75 62.5 60.0 321 329 14.4 max. 18857 Fig. 11 - Reel Dimensions - GS18 3.5 3.1 2.2 2.0 Cathode Anode 2.5 1.5 8.3 7.7 1.85 1.65 1.6 1.4 10.4 8.4 120° 4.0 3.6 5.75 5.25 3.6 3.4 8.3 7.7 1.85 1.65 1.6 1.4 4.1 3.9 4.1 3.9 0.25 2.05 1.95 16 025 Fig. 9 - Tape Dimensions in mm for PLCC-2 Rev. 1.4, 17-May-13 Document Number: 80101 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packing and Order Information www.vishay.com Vishay Semiconductors TAPE DIMENSIONS FOR PLCC-2 PLUS 22068 068 Ø 180 Ø 62.5 - 2.5 technical drawings according to DIN specifications Ø 13 ± 0.2 12.4 + 2 Label area with depression (Measured at outer edge) GS08 = 1000 pcs 18.4 Reels come in quantity of 1000 units. Ø 1.5 + 0.1 2 ± 0.05 Package marking 5.5 ± 0.05 4 ± 0.1 3.75 ± 0.1 8 ± 0.1 200 mm min. for Ø 180 reel Trailer (max., Measured at hub) 1.75 ± 0.1 Drawing-No.: 9.800-5104.01-4 Issue: 2; 19.03.10 2.2 ± 0.1 3.75 ± 0.1 Material: black static dissipative + 0.3 12 - 0.1 Not indicated tolerances ± 0.5 0.279 ± 0.02 Ø 1.5 + 0.25 480 mm min. for Ø 180 reel Component Leader technical drawings according to DIN specifications Drawing-No.: 9.700-5348.01-4 User feed direction Issue: 1; 01.03.10 Rev. 1.4, 17-May-13 Document Number: 80101 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packing and Order Information www.vishay.com Vishay Semiconductors TAPE DIMENSIONS FOR REVERSE GULLWING 20857 Rev. 1.4, 17-May-13 Document Number: 80101 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packing and Order Information www.vishay.com Vishay Semiconductors TAPE DIMENSIONS FOR MiniLEDs 19226 De-reeling direction 94 8158 > 160 mm Tape leader 40 empty compartments min. 75 empty compartments Carrier leader Carrier trailer Fig. 12 - Beginning and End of Reel Rev. 1.4, 17-May-13 Document Number: 80101 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packing and Order Information www.vishay.com Vishay Semiconductors MISSING DEVICES TOP TAPE REMOVAL FORCE A maximum of 0.5 % of the total number of components per reel may be missing, excluding missing components at the beginning and at the end of the reel. A maximum of three consecutive components may be missing, provided this gap is followed by six consecutive components. The removal force lies between 0.1 N and 1.0 N at a removal speed of 5 mm/s. The tape leader is at least 160 mm and is followed by a carrier tape leader with at least 40 empty compartments. The tape leader may include the carrier tape as long as the cover tape is not connected to the carrier tape. In order to prevent components from popping out of the blisters, the cover tape must be pulled off at an angle of 180 °C with regard to the feed direction. ORDER CODES Example: VLMG2100-GS08 The last component is followed by a carrier tape trailer with at least 75 empty compartments and sealed with cover tape. TAPE AND REEL DIMENSIONS FOR TLM.10., TLM.11.., VLM.11.. 0603 LED LEADFRAME BASED 18562 19043 Rev. 1.4, 17-May-13 Document Number: 80101 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packing and Order Information www.vishay.com Vishay Semiconductors 19044 Rev. 1.4, 17-May-13 Document Number: 80101 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packing and Order Information www.vishay.com Vishay Semiconductors technical drawings according to DIN specifications Drawing-No.: 9.800-5122.01-4 Issue: 2; 03.11.11 Ø 60 ± 1 Ø 178 ± 2 Ø 13 TAPE AND REEL DIMENSIONS FOR VLM.13.. 0603 LED PCB BASED 9.4 ± 1.5 0.9 0.25 A - A (5:1) 8 + 0.3 - 0.1 1.75 ± 0.1 Cathode A A 4 ± 0.1 4 ± 0.1 Ø 0.5 2 ± 0.05 User feed direction Ø 1.55 ± 0.05 Drawing-No.: 9.700-5386.01-4 Issue: 1; 17.10.11 Rev. 1.4, 17-May-13 3.5 ± 0.05 technical drawings according to DIN specifications Document Number: 80101 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packing and Order Information www.vishay.com Vishay Semiconductors technical drawings according to DIN specifications Drawing-No.: 9.800-5122.01-4 Issue: 2; 03.11.11 Ø 60 ± 1 9.4 ± 1.5 0.2 0.45 ± 0.05 A - A (5:1) Ø 178 ± 2 Ø 13 TAPE AND REEL DIMENSIONS VLM.15.. 0402 LED 1.75 ± 0.1 Cathode A A 4 ± 0.1 4 ± 0.1 Ø 0.4 2 ± 0.05 User feed direction Ø 1.55 ± 0.05 3.5 ± 0.05 Drawing-No.: 9.700-5388.01-4 Issue: 1; 20.03.12 Rev. 1.4, 17-May-13 8 + 0.3 - 0.1 Technical drawings according to DIN specification. Document Number: 80101 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packing and Order Information www.vishay.com Vishay Semiconductors PACKAGING DIMENSIONS FOR TELUX TUBE WITH BAR CODE LABEL Drawing-No.: 9.700-5223.0-4 Rev. 2; Date: 23.08.99 Fig. 13 - Drawing Proportions not scaled EXAMPLE FOR TELUX TUBE LABEL 90 52 A TLWR7600 PTC27 B C A. Bar code B. Type of component C. Manufacturing plant D. SEL - Selection Code (Bin) Digit 1 - code for Luminous Flux group Digit 2 - code for Dominant Wavelength group Digit 3 - code for Forward Voltage group Rev. 1.4, 17-May-13 SELB10 D DC20000121 BN12345 E F PCS70 MNO G H 8 16490 E. Date code F. Batch No. G. Total quantity H. Company code Document Number: 80101 13 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packing and Order Information www.vishay.com Vishay Semiconductors FAN FOLD BOX Label 600 45 16491 110 Label LABEL OF FAN FOLD BOX I. Type of component J. Manufacturing plant 106 H A 37 K. SEL - Selection Code (Bin) Digit 1 - code for Luminous Flux group Digit 2 - code for Dominant Wavelength group Digit 3 - code for Forward Voltage group L. Date Code year/week M. Day Code (e. g. 5: Friday) N. Batch No. O. Total quantity B C D Rev. 1.4, 17-May-13 E F G 18999 P. Company code Note • Any distance between bar code and character is more than 1 mm. Document Number: 80101 14 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000