TLHK4600 www.vishay.com Vishay Semiconductors High Intensity LED in Ø 3 mm Tinted Diffused Package FEATURES • AlInGaP technology • Standard Ø 3 mm (T-1) package • Small mechanical tolerances • Suitable for DC and high peak current • Very wide viewing angle • Luminous intensity categorized 19222 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION This device has been designed to meet the increasing demand for AlInGaP technology. APPLICATIONS It is housed in a 3 mm diffused plastic package. The wide viewing angle of these devices provides a high on-off contrast. • Status lights • Off / on indicator All packing units are categorized in luminous intensity groups. That allows users to assemble LEDs with uniform appearance. • Background illumination PRODUCT GROUP AND PACKAGE DATA • Legend light • Readout lights • Maintenance lights • Product group: LED • Package: 3 mm • Product series: standard • Angle of half intensity: ± 60° PARTS TABLE PART COLOR TLHK4600 Red LUMINOUS INTENSITY (mcd) MIN. TYP. MAX. 6.3 15 - at IF (mA) 10 WAVELENGTH (nm) MIN. - TYP. MAX. 630 - at IF (mA) FORWARD VOLTAGE (V) MIN. TYP. MAX. - 1.9 2.6 10 at IF (mA) TECHNOLOGY 20 AlInGaP on GaAs ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TLHK4600 PARAMETER TEST CONDITION Reverse voltage DC forward current Surge forward current Power dissipation SYMBOL VALUE UNIT VR 5 V mA Tamb ≤ 60 °C IF 30 tp ≤ 10 μs IFSM 0.1 A Tamb ≤ 60 °C PV 80 mW Tj 100 °C Operating temperature range Junction temperature Tamb -40 to +100 °C Storage temperature range Tstg -55 to +100 °C Tsd 260 °C RthJA 400 K/W Soldering temperature Thermal resistance junction/ambient Rev. 1.9, 14-Oct-14 t ≤ 5 s, 2 mm from body Document Number: 83102 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLHK4600 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLHK4600, RED TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Luminous intensity (1) PARAMETER IF = 10 mA IV 6.3 15 - mcd Dominant wavelength IF = 10 mA λd - 630 - nm Peak wavelength IF = 10 mA λp - 643 - nm Angle of half intensity IF = 10 mA ϕ - ± 60 - deg Forward voltage IF = 20 mA VF - 1.9 2.6 V Reverse voltage IR = 10 μA VR 5 - - V VR = 0 V, f = 1 MHz Cj - 15 - pF Junction capacitance Note (1) In one packing unit I Vmin./IVmax. ≤ 0.5 LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (mcd) STANDARD MIN. MAX. Q 6.3 12.5 R 10 20 S 16 32 T 25 50 U 40 80 V 63 125 W 100 200 X 130 260 Y 180 360 Z 240 480 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each bag (there will be no mixing of two groups on each bag). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one bag. In order to ensure availability, single wavelength groups will not be orderable. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 0° 50 40 30 20 10 10° 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement I v rel - Relative Luminous Intensity I F - Forward Current (mA) 60 80° 0 0 95 10894 20 40 60 80 Fig. 1 - Forward Current vs. Ambient Temperature for InGaN Rev. 1.9, 14-Oct-14 0.6 100 T amb - Ambient Temperature (°C) 0.4 0.2 0 95 10043 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Document Number: 83102 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLHK4600 www.vishay.com Vishay Semiconductors 10 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 100 10 1 0.1 0.01 1 1 1.5 2 2.5 VF - Forward Voltage (V) 95 10878 9611588 10 100 IF - Forward Current (mA) Fig. 6 - Relative Luminous Intensity vs. Forward Current 1.2 1.6 1.0 Irel - Relative Intensity I V rel - Relative Luminous Intensity Fig. 3 - Forward Current vs. Forward Voltage 1.2 0.8 0.4 0.8 0.6 0.4 0.2 I F = 10 mA 0 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 96 12077 0.0 600 96 12075 Fig. 4 - Relative Luminous Intensity vs. Ambient Temperature Ispec - Specific Luminous Intensity 1 3 620 640 660 680 700 λ - Wavelength (nm) Fig. 7 - Relative Intensity vs. Wavelength 2.0 1.6 1.2 0.8 0.4 0.0 96 11589 1 2 5 1 0.5 0.2 10 20 0.1 0.05 50 IF (mA) 0.02 tp/T Fig. 5 - Relative Luminous Intensity vs. Forward Current/Duty Cycle Rev. 1.9, 14-Oct-14 Document Number: 83102 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLHK4600 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters C Ø 3.2 ± 0.15 A AREA NOT PLANE 5.8 ± 0.3 34.4 ± 0.5 < 0.6 (2.5) 3.4 ± 0.15 4.4 ± 0.3 R1.4 (sphere) Ø 2.9 ± 0.15 2.54 nom. 1.5 ± 0.5 + 0.15 + 0.2 0.5 - 0.1 0.4 - 0.05 technical drawings according to DIN specifications Drawing-No.: 6.544-5255.01-4 Issue: 9; 28.07.14 Rev. 1.9, 14-Oct-14 Document Number: 83102 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000