Opti-Core™ Fibre Optic Indoor/Outdoor All-Dielectric Cable with Tight Buffered Fibres - EMEA C ab l e D ata S H E E T technical information Panduit™ Opti-Core ™ Indoor/Outdoor All-Dielectric Cable with tight buffered fibres is an integral part of the Panduit end-to-end fibre optic solution, designed to support today’s data needs while meeting tomorrow’s ever-advancing network requirements. This cable provides a water and moisture resistant outer jacket, high density, and easy installation in transitional aerial and duct applications and entrance facilities. 900μm +/50μm tight buffered fibres permit easy connectorization permit. Opti-Core™ Fibre Optic Indoor/Outdoor All-Dielectric Cables (2 to 24 fibres) with tight buffered fibres have a non-subunitized design that surrounds the using glass yarn strength members, providing improved rodent protection- effective in many cases. Cables with greater than 24 fibres feature a sub-unit design that simplifies sub-unit and fibre identification, surrounds the fibre inside sub-units with aramid yarn, provides easy access and routing of the fibres, and increases cable durability using a dielectric central strength member. Sub-units made of thin LSZH sheath in the same colours as the outer sheath, marked with unit numbers 1 through 6. Unit diameter approximately 3.5mm. Opti-Core™ Fibre Optic Indoor/Outdoor Riser (OFNR) Rated All-Dielectric Cable with tight buffered fibres tested is in accordance with Telcordia GR-20, Issue 2, GR-409 and with relevant EIA/TIA-455 series FOTPs for fibre optic cable. Opti-Core™ Fibre Optic Indoor/Outdoor Low Smoke Zero Halogen (LSZH) Rated All-Dielectric Cable with tight buffered fibres meets the IEC 60794-1 standard. All standard RoHS compliant multimode and singlemode cable is available in 2, 4, 6, 8, 12, and 24 fibre counts as a “non-subunitized” design and in 36, 48, 72, and 96 fibre counts as a “sub-unitized” design. application Can be used for indoor and outdoor applications including LAN and WAN backbones, backbones in data centers, and routing between telecommunications rooms. The cable is suited for installation in ducts and on trays. Cable features a UV stabilized water and moisture resistant outer jacket. standards EN 187 000 IEC 60794-2 IEC 60794-2-20 ISO 11801 2nd edition EN 50-173-1 EN 501-73-1:2002 construction Central strength member 2-24 fibres: E-Glass rovings 36-96 fibres: FRP rod with LSZH covering Tight buffer 4-96 fibres: 900μm +/- 50μm Water blocking The core is water blocked using swellable tape and yarn Wrapping Swellable tape Sheath 2-24 fibres: 1.1mm blue Fire Bur, Halogen free, flame resistant thermoplastic sheathing compound acc. EN 502-0-2-27, UV stabilized 36-96 fibres: LSHF-FR fire retardant, UV stabilized, EN 50290-2-27 fire ratings IEC 60332-1-2 Single vertical wire test IEC 60754-1 No halogens IEC 60754-2 No acid matters IEC 61034-2 No dense smoke IEC 60332-3-24=IEC 332-3C (for 24-96 fibres) Vertically mounted bunched wires and cables w w w. pa n d u it.c o m Opti-Core™ Fibre Optic Indoor/Outdoor All-Dielectric Cable with Tight Buffered Fibres - EMEA mechanical properties Tensile strength (long-term) Tensile strength (installation) E11 2 to 12-fibres: 16-fibres: 24-fibres: 36-fibres: 48-fibres: 72-fibres: 96-fibres: 500 N 1000 N 1500 N 1200 N 1400 N 1800 N 2200 N E11 2 to 12-fibres: 1000 N 16-fibres: 1400 N 24-fibres: 1600 N 36-fibres: 2400 N 48-fibres: 2800 N 72-fibres: 3600 N 96-fibres: 4400 N 2 to 12-fibres: 1500 N 16-fibres: 2100 N 24-fibres: 2400 N 36-fibres: 3600 N 48-fibres: 4200 N 72-fibres: 5400 N 96-fibres: 6600 N Max. installation load Compressive strength (crush) E3 3000 N/100mm Impact E4 20 J Torsion E7 5 cycles ±1 turn Kink E10 No kink at 12 x cable diameter Temperature range F1 Water penetration F5B Installation: -20 °C to +70 °C (2 to 24-fibres) Operation: -20 °C to +70 °C (2 to 24-fibres) Storage: -40 °C to +70 °C (2 to 24-fibres) Installation: -40 °C to +70 °C (36 to 96-fibres) Operation: -40 °C to +70 °C (36 to 96-fibres) Storage: -40 °C to +70 °C (36 to 96-fibres) No water leakage after 24 hours physical properties 2 Fibre Count Cable O.D. (mm) Long-Term Bend Radius (mm) Installation Bend Radius (mm) Cable Weight (kg/km) 2 6 100 50 32 4 6.5 100 50 34 6 6.5 100 50 36 8 7.0 100 50 39 12 7.0 130 75 43 24 12 150 150 150 36 12.5 150 150 165 48 14.5 150 150 230 72 20 200 200 375 96 19 200 200 325 Opti-Core™ Fibre Optic Indoor/Outdoor All-Dielectric Cable with Tight Buffered Fibres - EMEA fibre colour code 2 to 24 fibres Fibre colour code 1 Red 7 Brown 13 Yellow w/mark every 70mm 19 Yellow w/mark every 35mm 2 Green 8 Violet 14 White w/mark every 70mm 20 White w/mark every 35mm 3 Blue 9 Turquoise 15 Grey w/mark every 70mm 21 Grey w/mark every 35mm 4 Yellow 10 Black 16 Turquoise w/mark every 70mm 22 Turquoise w/mark every 35mm 5 White 11 Orange 17 Orange w/mark every 70mm 23 Orange w/mark every 35mm 6 Grey 12 Pink 18 Pink w/mark every 70 mm 24 Pink w/mark every 35mm fibre sub-unit colour code 36 to 96 fibres Fibre colour code 1 Red 4 Yellow 2 Green 5 white 3 Blue 6 Grey ordering information Example: FPKL512 - Fibre Indoor/Outdoor Tight Buffered Unarmored, Low Smoke Zero Halogen, OM2, 12-fibre Character 1 2 3 4 5 6 7 Example F P K L 5 1 2 1 and 2 – Fibre Product 5– FP = Fibre- OM1, OM2, OS2 FQ = Fibre- OM3, OM4, 3 – Cable Construction K = Indoor/Outdoor Tight Buffered Unarmored 4 – Flame Rating L - Low Smoke Zero Halogen 6 and 7 – Fibre Count Fibre Type 6 = OM1 62.5/125µm 5 = OM2 50/125µm 9 = OS2 9/125µm X = OM3 10G 50/125µm Z = OM4 10G 50/125µm 02 = 2-fibre 04 = 4-fibre 06 = 6-fibre 08 = 8-fibre 12 = 12-fibre 24 = 24-fibre 36 = 36-fibre 48 = 48-fibre 72 = 72-fibre 96 = 96-fibre WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2014 Panduit Corp. All rights reserved. FBDS10--WW-UKE 5/2014