SC Fiber Optic Connectors: FBSP15--WW-ENG

SC Fiber Optic Connectors
S P E C I F I C AT I O N S H E E T
SC Simplex Fiber Optic Connectors
for 900μm Buffered Fiber and
3.0mm Jacketed Cable
specifications
SC field polish connectors are TIA/EIA-604 FOCIS-3 compliant. SC
simplex and duplex connectors are field terminable. The fibers shall
terminate in 2.5mm ceramic ferrules with non-optical disconnect
functionality and an average insertion loss of 0.1dB (multimode)
and 0.15dB (singlemode) per mated pair.
technical information
Standards requirements:
TIA/EIA-604 FOCIS-3 compliant; exceeds
TIA/EIA-568-B.3 requirements
Fiber compatibility:
62.5/125μm OM1, 50/125μm OM2, 10Gig™ 50/125μm laser
optimized OM3/OM4 and 9/125μm OS1/OS2
Fiber cable type:
900μm tight-buffered cable recommended
Fiber cable size:
3.0mm or 1.6mm – 2.0mm jacketed cable
Ferrule type:
Zirconia ceramic ferrule
Insertion loss:
0.1dB average (multimode), 0.15dB (singlemode)
Return loss:
>20dB (multimode), >40dB (singlemode)
key features and benefits
Free floating housing
Ensures complete latching even when inserted by the boot; valuable in
high-density spacing applications
Pre-assembled inner
inner housing
Fewer parts simplifies assembly and reduces installer error for lower
installed cost
Full length adhesive
fill tube
Prevents adhesive from entering internal cavity of connector to reduce
installer error
Non-optical disconnect
Maintains data transmission under tensile loads for jacketed cable for
network reliability
Anaerobic adhesive
field installation
Simplifies and reduces installation time by 50% compared to heat cured
epoxy terminations; curing oven/time not required
High temperature
thermoplastic design
Allows use of high glass transition temperature epoxies with cure
temperatures up to 150°C (302°F)
Simplex available with
900μm and 3.0mm or
1.6 – 2.0mm boots
One connector part number for both fiber types for easier ordering
and stocking
Standard 2.5mm
ceramic ferrules
Provide the highest durability for repeated matings
Multimode (black boots): FSCM5BL
Multimode (black boots): FSCMBL
Multimode (red boots):
FSCMRD
Singlemode (blue boots): FSCSBU
SC Simplex Fiber Optic Connectors
for 900μm Buffered Fiber and
1.6mm – 2.0mm Jacketed Cable
Multimode (black boots): FSCM2.05BL
Multimode (black boots): FSCM2.0BL
Multimode (red boots):
FSCM2.0RD
Singlemode (blue boots): FSCS2.0BU
SC Duplex Fiber Optic Connectors
for 3.0mm Jacketed Cable
Multimode (black boots) FSCDM5BL
Multimode (black/red):
FSCDM
SC Fiber Optic Adapters
Duplex MM:
Duplex MM:
Duplex 10Gig™(zirc):
Simplex SM (zirc):
Simplex APC (zirc):
L = Bag of 50 adapters; 100 per carton.
Mini-Com ® SC Adapter Modules
Duplex MM:
Duplex MM:
Duplex 10Gig™ (zirc.):
Simplex SM (zirc):
Simplex APC (zirc):
Panduit SC Fiber Optic Connectors are
used for equipment cross-connects or
interconnects in backbone, horizontal and
work area applications. SC connectors are
recommended by TIA/EIA-568-B.3 at the wall
outlet and the telecommunications closet.
w w w. p a n d u it.co m
Multimode connectors provide a robust and easy
to terminate solution for lower cost fiber-to-thedesk applications. Singlemode connectors
provide added bandwidth capacity for data
hungry applications.
CMDEISCEI
CMDBLSCBL
CMSBUSCZBU
CMSBUSCZBU
CMSAGSCZBL
Opticom ® SC Fiber Adapter Panels
6 duplex MM:
FAP6WEIDSC
6 duplex MM:
FAP6WBLDSC
6 duplex 10Gig™:
FAP6WAQDSCZ
6 duplex SM (zirc.): FAP6WBUDSCZ
12 simplex SM (zirc.): FAP12WBUSCZ
Opticom ® QuickNet ™ Pre-Terminated
MTP* Cassettes
12 SC to MTP* (12f): FC^-12-3S
6 SC to MTP* (12f):
FC^-12-3
Opti-Core ® Fiber Optic Patch Cords
Duplex SC to SC:
F^D3-3M‡
Simplex SC to SC:
F^S3-3M‡
Simplex SC to pigtail: F^B3-NM‡
SC Termination Tooling
Termination kit:
FJKITG
Refurbishment kit:
FJKITG-RFB
Additional Components for Singlemode
1μm diamond film:
FPF1-V
0.05μm lapping film: FLCFPLF-X
HD Connector Removal Tool
For LC and SC:
applications
FADSCEI-L
FADSCBL-L
FADSCZAQ-L
FASSCZBU-L
FASSCZAG-L
PCRT1
Substitute for module color:
EI = Electric Ivory BU = Blue
IG = International Gray WH = White
TG = Technical Gray BL = Black
AW = Arctic White IW = Off White
EW = European White
^Substitute for fiber type:
X (OM3/OM4 – 10Gig™ 50/125μm),
5 (OM2 – 50/125μm), 6 (OM1 – 62.5/125μm)
or 9 (OS1/OS2 – 9/125μm).
‡Substitute for length in meters: 1, 2, 3, 5 or
10 for patch cords, and 1, 2 or 3 for pigtails;
singlemode patch cords are also available
in 12,15, 25 or 30 meter lengths. Contact
Customer Service for other available lengths.
SC Fiber Optic Connectors
performance information
Test Parameter
Description
Result
Qualification test suite
(TIA/EIA-568-B.3 requirements)
Complete testing protocol per TIA/EIA-568-B.3
using TIA/EIA FOTPs that include mechanical,
environmental and optical test sequences
Compliant; exceeds
TIA/EIA-568-B.3 requirements
Connector intermatability
Dimensional and material compliance to
TIA/EIA standards
All connectors are FOCIS compliant
with TIA/EIA-604-3
selection information
Part Number
Connector
Type
Cable Type
Fiber
Ferrule
Housing
Color
Boot
Color
FSCM5BL
Simplex
900µm buffered fiber and
3.0mm jacketed cable
Black
Black
FSCM2.05BL
Simplex
900 micron buffered fiber and
1.6 – 2.0mm jacketed cable
FSCDM5BL
Duplex
FSCMBL
Simplex
900μm buffered fiber and
3.0mm jacketed cable
FSCMRD
Simplex
900μm buffered fiber and
3.0mm jacketed cable
FSCM2.0BL
Simplex
900μm buffered fiber and
1.6mm – 2.0mm jacketed cable
Black
FSCM2.0RD
Simplex
900μm buffered fiber and
1.6mm – 2.0mm jacketed cable
Red
FSCDM
Duplex
3.0mm jacketed cable
Red and
Black
FSCSBU
Simplex
900μm buffered fiber and
3.0mm jacketed cable
FSCS2.0BU
Simplex
900μm buffered fiber and
1.6mm – 2.0mm jacketed cable
Average
Insertion Loss*
Return
Loss
0.1dB
>20
0.15dB
>40
3.0mm jacketed cable
Multimode
Singlemode
Zirconia
Ceramic
Zirconia
Ceramic
Electric
Ivory
Red
Blue
Blue
*All connector insertion loss values calculated from tests taken with precision launch jumper assemblies per TIA/EIA-FOTP-171.
SC Simplex Connectors
SC Duplex Connector
For 900µm Fiber and 3.0mm Jacketed Cable
For 3.0mm Jacketed Cable
1.93 [49.0]
FSCMBL, FSCMRD, FSCSBU
2.20 [55.9]
For 900µm Fiber and 1.6mm – 2.0mm Jacketed Cable
2.20
[55.9]
1.93 [49.0]
FSCDM
2.20 [55.9]
FSCM2.0BL, FSCM2.0RD, FSCS2.0BU
Dimensions are in inches [Dimensions in brackets are in millimeters].
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
[email protected]
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
[email protected]
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
[email protected]
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
[email protected]
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
[email protected]
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
[email protected]
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: [email protected]
or by phone: 800.777.3300
©2015 Panduit Corp.
ALL RIGHTS RESERVED.
FBSP15--WW-ENG
3/2015