Panduct PanelMax One-Piece Corner Wiring Duct For use with Panduit Panduct Types F, G, FS and D Wiring Duct Part Numbers: CWD2**6, CWD3**6, CWD4**6, C2**6, CDCLP2, CDCLP3, CDCLP4, CDLB3, CDLB4 INSTALLATION INSTRUCTIONS © Panduit Corp. 2012 RW207 Option 1 - Panduct Corner Wiring Duct Mounting Clip Note: Clips provide a permanent installation and are not intended to allow for product removal 1 Refer to chart on page 4 for mounting hole locations CDCLP2, CDCLP3, CDCLP4 (sold separately) 2 - or Mounting clips must be installed level Note: #10-32 x 1/2" (or sheet metal screw equivalent) to be supplied by the installer/end user 3 CWD2**6 CWD3**6 -orCWD4**6 4 3a Wiring Duct Mounting Clip C2**6 (sold separately) ** Denotes color. For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 4 INSTALLATION INSTRUCTIONS © Panduit Corp. 2012 Option 2 - Panduct Nylon Rivets or Standard Fasteners 1 Refer to chart on page 4 for mounting hole locations - or - NR1-C (sold separately) Note: #10-32 x 1/2" (or sheet metal screw equivalent) to be supplied by the installer/end user 2 3 CWD2**6 CWD3**6 -orCWD4**6 NR1-C (Install on both sides of duct) TNR (sold separately) 4 C2**6 (sold separately) For Technical Support: www.panduit.com/resources/install_maintain.asp Page 2 of 4 RW207 INSTALLATION INSTRUCTIONS © Panduit Corp. 2012 RW207 Option 3 - Panduct Corner Wiring Duct L-Bracket Mounting Note: For use in vertical applications only when no side panel is present. - or Note: #10-32 x 1/2" (or sheet metal screw equivalent) to be supplied by the installer/end user CDLB3, CDLB4 (sold separately) Corner Duct L-Bracket “C” minimum clearance to side wall “D” minimum distance to edge of back panel CDLB3 2.03" (51.6) 0.68" (17.4) CDLB4 2.96" (75.2) 0.68" (17.4) Dimensions may vary due to the depth of the side panel or due to the size of the panel opening. 1 “C” 2 “D” CWD3**6 -orCWD4**6 only 6" max 10" max Back Panel 3 L-Bracket Ribs 4 5 For Technical Support: www.panduit.com/resources/install_maintain.asp Page 3 of 4 INSTALLATION INSTRUCTIONS © Panduit Corp. 2012 RW207 Optional Feature - Panduct Solid/Slotted Divider Wall CWD2**6 CWD3**6 -orCWD4**6 D4H6, SD4H6 (sold separately) - or - Mounting Hole Locations for CDCLP or Standard Fasteners (Options 1 and 2) “X” “X” Dimension “X ” Corner Duct CDCLP Screws, Fasteners, or NR1-C CWD2**6 1.60" (1 19 32 ") 2.95" (2 15 16 ") CWD3**6 1.91" (1 29 32 ") 3.88" (3 7 8 ") CWD4**6 2.84" (2 27 32 ") 4.93" (4 15 16 ") Mounting holes must be level 6" m 20" x E-mail: [email protected] For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp ma ax www.panduit.com Page 4 of 4 Phone: 866-405-6654 RW207_05