Ligitek Photovoltaic Co., Ltd. FEATURES: ‧Single crystalline silicon photovoltaic module. ‧High power module using 6” mono crystalline solar cell. ‧Bypass diode is attached minimize power reduction caused by shade. ‧50 solar cells and connection in series. ‧Using optical low iron tempered glass, EVA resin, module with aluminum frame for outdoor use. ‧The module will maintain 90% of minimum specification performance along the first 12 years, and will maintain 80% of minimum specification performance along sequent 13 years. LM190BA5A00/LM195BA5A00/LM200BA5A00/LM205BA5A00/LM210BA5A00/ Maximum power (Pmax) 190W 195W 200W 205W 210W Maximum power voltage (Vpm) 24.09 V 24.17 V 24.25 V 24.32 V 24.42 V Maximum power current (Ipm) 7.88 A 8.07 A 8.25 A 8.43 A 8.60 A Open circuit voltage (Voc) 30.95 V 31.10 V 31.25 V 31.35 V 31.57 V Short circuit current (Isc) 8.42 A 8.57 A 8.71 A 8.84 A 9.05 A Module efficiency (ηm) 14.2% 14.6% 14.9% 15.3% 15.7% No. & type solar cells Maximum system voltage 50 in series/ 6”(156x156 mm) single TUV:DC 1000 V/UL:DC 600 V Series fuse rating 15 A Performance tolerance ±3% Operating temperature -40 to +90 ℃ Storage temperature -40 to +90 ℃ 1626x824x38.1 mm±2 mm/64”x32.4”x1.5”±0.08” Dimensions 16.6 kg/36.60 lbs Weight Output Terminal(Tyco J-Box) (BizLink J-Box) (STC) Standard Test Conditions: 25°C, 1 kW/m², AM 1.5 1394462-4(-)/6-1394461-2(+) S418-32B(-)/S418-31B(+) B3(RD-W04-02B) LM190BA5A00/LM195BA5A00/LM200BA5A00/LM205BA5A00/LM210BA5A00 / ELECTRICAL CHARACTERISTICS DEPENDENCE ON TEMPERATURE Amps(A) Amps(A) o 10 8 6 CELL TEMP. 25 C 1000W/m2 10 800W/m2 8 AM1.5,1000W/m2 1000W/m2 600W/m2 o 75 C 6 o 50 C 25 C o 4 4 2 2 0 0 0 10 20 30 40 0 50 10 20 30 40 50 Volts(V) Volts(V) Temperature coefficient of Isc: 0.04%/℃ Power temperature coefficient: -0.43%/℃ Temperature coefficient of Voc: -0.33%/℃ NOCT:46±1℃ OUTLINE DIMENSIONS Section A-A A A Lead Wire + +- + Field wiring:Cu wiring only, min. 12 AWG(4mm²), insulated for 90℃ min. B3(RD-W04-02B)