A2595: 8-Channel Saturated Sink Driver

Data Sheet
29320C
2595
8-CHANNEL
SATURATED SINK DRIVER
UDN2595A (DIP)
Developed for use with low-voltage LED and incandescent displays requiring low output saturation voltage, the UDN2595A and
A2595SLW meet many interface needs, including those exceeding the
capabilities of standard logic buffers. The eight non-Darlington
outputs of each driver can continuously and simultaneously sink load
currents of 100 mA at ambient temperatures of up to +75°C.
T
C
U
D
O
R
y
l
P On
The eight-channel driver’s active-low inputs can be driven directly
from TTL, Schottky TTL, DTL, 5 to 16 V CMOS, and NMOS logic.
All input connections are on one side of the package, output connections on the other, for simplified printed wiring board layouts.
These drivers are packaged in plastic DlPs (suffix A) or surfacemountable wide-body SOlCs (suffix LW), and are rated for operation
over the temperature range of -20°C to +85°C. The A2595SLW is also
available for operation to -40°C. To order, change the suffix from
‘SLW’ to ‘ELW’.
D
e
E
c
U
n
N ere
I
T
f
e
N
R
O
r
C
o
S F
I
D
Dwg. No. A-11,407
FEATURES
■ Non-Inverting Function
(Input Low = Output ON)
ABSOLUTE MAXIMUM RATINGS
at 25°C Free-Air Temperature
for any one driver
(unless otherwise noted)
■ 200 mA Current Rating
■ 100 mA Continuous and Simultaneous
(All outputs) to +85°C
■ Low Saturation Voltage
Output Voltage, VCE ...................... 20 V
■ TTL, CMOS, NMOS Compatible
Supply Voltage, VS ....................... 20 V
■ Efficient Input/Output Pin Format
Input Voltage, VIN ......................... 20 V
■ DIP or SOIC Packaging
Output Current, lC .................... 200 mA
Ground Terminal Current, IGND ... 1.6 A
Package Power Dissipation,
PD ................................. See Graph
Operating Temperature Range,
TA .......................... -20°C to +85°C
Storage Temperature Range,
TS ......................... -55°C to +150°C
Always order by complete part number:
Part Number Package
UDN2595A
18-Pin DIP
A2595SLW
20-Lead Wide-Body SOIC
2595
8-CHANNEL
SATURATED SINK DRIVER
FUNCTIONAL BLOCK DIAGRAM
ONE OF EIGHT DRIVERS
ALLOWABLE PACKAGE POWER DISSIPATION IN WATTS
Dwg. No. A-11,408
2.5
A2595SLW (SOIC)
2.0
1
20
2
19
3
18
4
17
5
16
6
15
7
14
8
13
9
12
SUFFIX 'A', RθJA = 65°C/W
1.5
1.0
SUFFIX 'LW', RθJA = 90°C/W
0.5
+V
S
NO
CONNECT.
10
NC
NC 11
GROUND
NO
CONNECT.
0
25
50
75
100
125
AMBIENT TEMPERATURE IN °C
150
Dwg. GS-009-1B
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
Copyright © 1981, 2003 Allegro MicroSystems, Inc.
Dwg. PP-064-1
2595
8-CHANNEL
SATURATED SINK DRIVER
ELECTRICAL CHARACTERISTICS at TA = +25°C, VS = 5.0 V (unless otherwise noted).
Limits
Characteristic
Symbol
Output Leakage
Current
ICEX
Output Saturation
Voltage
Input Current
Input Voltage
Input Capacitance
Supply Current
Min.
Max.
Units
VIN ≥ 4.5 V, VOUT = 20 V, TA = 25°C
—
50
µA
VIN ≥ 4.6 V, VOUT = 20 V, TA = 70°C
—
100
µA
VIN = 0.4 V, IOUT = 50 mA
—
0.5
V
VIN = 0.4 V, IOUT = 100 mA
—
0.6
V
VIN = 0.4 V, IOUT = 100 mA
—
-1.6
mA
VIN = 0.4 V, IOUT = 100 mA, VS = 15 V
—
-5.0
mA
VIN(ON)
IOUT = 100 mA, VOUT ≤ 0.6 V
—
0.4
V
VIN(OFF)
IOUT = 100 µA, TA = 70°C
4.6
—
V
—
25
pF
VIN = 0.4 V, IOUT = 100 mA
—
6.0
mA
VIN = 0.4 V, IOUT = 100 mA, VS = 15 V
—
20
mA
VCE(SAT)
IlN(ON)
Test Conditions
CIN
lS
NOTES: 1. Negative current is defined as coming out of the specified device pin.
2. The VIN(ON) voltage limit guarantees a minimum output sink current per the specified conditions.
3. lS is measured with any one of eight drivers turned ON.
The products described here are manufactured under one or more
U.S. patents or U.S. patents pending.
Allegro MicroSystems, Inc. reserves the right to make, from time to
time, such departures from the detail specifications as may be
required to permit improvements in the performance, reliability, or
manufacturability of its products. Before placing an order, the user is
cautioned to verify that the information being relied upon is current.
Allegro products are not authorized for use as critical components
in life-support devices or systems without express written approval.
The information included herein is believed to be accurate and
reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringement of patents or other rights of
third parties which may result from its use.
www.allegromicro.com
2595
8-CHANNEL
SATURATED SINK DRIVER
UDN2595A
Dimensions in Inches
(controlling dimensions)
0.014
0.008
10
18
0.430
MAX
0.280
0.240
0.300
BSC
1
0.070
0.045
0.100
0.920
0.880
9
BSC
0.005
MIN
0.210
MAX
0.015
0.150
0.115
MIN
0.022
0.014
Dwg. MA-001-18A in
Dimensions in Millimeters
(for reference only)
18
0.355
0.204
10
10.92
MAX
7.11
6.10
7.62
BSC
1
1.77
1.15
2.54
23.37
22.35
BSC
9
0.13
MIN
5.33
MAX
0.39
3.81
2.93
MIN
0.558
0.356
Dwg. MA-001-18A mm
NOTES: 1. Exact body and lead configuration at vendor’s option within limits shown.
2. Lead spacing tolerance is non-cumulative.
3. Lead thickness is measured at seating plane or below.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 (508) 853-5000
2595
8-CHANNEL
SATURATED SINK DRIVER
A2595SLW
Dimensions in Inches
(for reference only)
20
11
0.0125
0.0091
0.419
0.394
0.2992
0.2914
0.050
0.016
0.020
0.013
1
2
0.050
3
0.5118
0.4961
0° TO 8°
BSC
0.0926
0.1043
Dwg. MA-008-20 in
0.0040 MIN.
Dimensions in Millimeters
(controlling dimensions)
20
11
0.32
0.23
10.65
10.00
7.60
7.40
1.27
0.40
0.51
0.33
1
2
1.27
3
13.00
12.60
BSC
0° TO 8°
2.65
2.35
0.10 MIN.
NOTES: 1. Exact body and lead configuration at vendor’s option within limits shown.
2. Lead spacing tolerance is non-cumulative.
www.allegromicro.com
Dwg. MA-008-20 mm