10-FZ062TA015SM-P985D13 target datasheet flow PFC 0 CD 650 V / 15 A Features ● ● ● ● ● flow 0 12mm housing High-efficient rectifier High-efficient IGBT H5 + Stealth 2 Diode Ultra-fast switching speed Integrated capacitors Thermistor Schematic Target applications ● SMPS ● Welding Types ● 10-FZ062TA015SM-P985D13 Maximum Ratings Tj=25°C, unless otherwise specified Parameter Condition Symbol Value Unit 650 V 21 A 45 A 44 W PFC Switch Collector-emitter voltage Collector current V CES IC T j = T jmax T s = 80 °C Repetitive peak collector current I CRM t p limited by T jmax Total power dissipation P tot T j = T jmax Gate-emitter voltage V GES ±20 V Maximum Junction Temperature T jmax 175 °C Copyright Vincotech 1 T s = 80 °C 27 Oct. 2015 / Revision 1 10-FZ062TA015SM-P985D13 target datasheet Parameter Conditions Symbol Value Unit 600 V T s = 80°C 20 A T j = °C 150 A T s = 80°C 54 W 175 °C Value Unit PFC Diode Peak Repetitive Reverse Voltage Continuous (direct) forward current V RRM IF T j = T jmax Surge (non-repetitive) forward current I FSM 60 Hz Single Half Sine Wave Total power dissipation P tot T j = T jmax Maximum Junction Temperature T jmax Parameter Conditions Symbol PFC Sw. Protection Diode \ Current Transformer Protection Diode Peak Repetitive Reverse Voltage Continuous (direct) forward current V RRM IF Repetitive peak forward current I FRM Total power dissipation P tot Maximum Junction Temperature T jmax Parameter T j = T jmax T s = 80°C T j = T jmax T s = 80°C Conditions Symbol 650 V 17 A 20 A 33 W 175 °C Value Unit 1600 V 30 A 230 A 260 A s 38 W 150 °C Rectifier Diode \ Shunt Protection Diode Peak Repetitive Reverse Voltage Continuous (direct) forward current Surge (non-repetitive) forward current V RRM IF I FSM 2 Surge current capability I t Total power dissipation P tot Maximum Junction Temperature T jmax Parameter T s = 80°C T j = T jmax 50 Hz Single Half Sine Wave t p = 10 ms T j = T jmax T j = 150°C T s = 80°C Conditions 2 Value Unit V MAX 1000 V T op -55…+125 °C Symbol DC Link Capacitor Maximum DC voltage Operation Temperature Copyright Vincotech 2 27 Oct. 2015 / Revision 1 10-FZ062TA015SM-P985D13 target datasheet Parameter Conditions Symbol Value Unit PFC Shunt DC forward current Power dissipation Parameter IF T c =25°C 35 A P tot T c =25°C 5 W Value Unit Conditions Symbol Module Properties Thermal Properties Storage temperature T stg -40…+125 °C Operation Junction Temperature T jop -40…+(T jmax - 25) °C 4000 V min 12,7 mm 9,42 mm Isolation Properties Isolation voltage V isol DC voltage Creepage distance Clearance Comparative Tracking Index Copyright Vincotech t p=2s >200 CTI 3 27 Oct. 2015 / Revision 1 10-FZ062TA015SM-P985D13 target datasheet Characteristic Values PFC Switch Parameter Symbol Conditions V GE [V] V CE [V] Value I C [A] T j[ °C] Unit Min Typ Max 3,3 4 4,7 25 1,64 2,22 125 1,77 150 1,80 Static Gate-emitter threshold voltage V GE(th) Collec tor-emitter saturation voltage V CEsat V GE=V CE 0,0004 15 15 Collec tor-emitter cut-off c urrent I CES 0 650 Gate-emitter leakage current I GES 20 0 Internal gate resistance 25 125 25 40 120 125 rg none Input capacitance C ies 930 Output capacitance C oes Reverse transfer c apac itanc e C res Gate c harge f=1MHz 0 V 125 25 25 25 V µA nA Ω 24 pF 4 15 Qg 520 15 25 38 nC 2,14 K/W Value Unit Thermal Thermal resistanc e junction to sink R th(j-s) phase-change material ʎ =3,4W /mK PFC Diode Parameter Symbol Conditions V r [V] I F [A] T j [°C] Min Typ Max 25 2,48 2,6 125 1,73 Static Forward voltage VF Reverse leakage current Ir 15 600 25 10 150 V µA Thermal Thermal resistance junction to sink Copyright Vincotech R th(j-s) phase-change material ʎ =3,4W/mK 1,75 4 K/W 27 Oct. 2015 / Revision 1 10-FZ062TA015SM-P985D13 target datasheet PFC Sw. Protection Diode \ Current Transformer Protection Diode Parameter Symbol Conditions Value V r [V] I F [A] T j [°C] Min Unit Typ Max 25 1,67 1,87 125 1,56 Static Forward voltage VF Reverse leakage current Ir 10 25 650 0,14 150 V µA Thermal Thermal resistance junction to sink R th(j-s) phase-change material ʎ =3,4W/mK 2,87 K/W Value Unit Rectifier Diode \ Shunt Protection Diode Parameter Conditions Symbol V r [V] I F [A] T j [°C] Min Typ Max 25 1,25 1,29 125 1,24 Static Forward voltage VF Reverse leakage current Ir 30 1600 25 10 150 1000 V µA Thermal Thermal resistance junction to sink R th(j-s) phase-change material ʎ =3,4W/mK 1,86 K/W Value Unit DC Link Capacitor Parameter Symbol Conditions T j [°C] Capacitance Typ Max 100 C Tolerance Copyright Vincotech Min -10 5 nF +10 % 27 Oct. 2015 / Revision 1 10-FZ062TA015SM-P985D13 target datasheet PFC Shunt Parameter Symbol Conditions Value T j [°C] R1 value R Temperature coeficient tc Internal heat resistance Inductanc e Min Typ 19 Unit Max 21 mΩ 50 ppm/K R thi 13 K/W L 3 nH 20 - 60 Thermistor Parameter Conditions Symbol V GE [V] Rated resistance ΔR/R Power dissipation P I C [A] T j[ °C] Min 25 R Deviation of R100 V CE [V] Value R100=1486 Ω 100 Power dissipation constant Typ Unit Max 21,5 -4,5 kΩ +4,5 % 25 210 mW 25 3,5 mW/K B-value B(25/50) 25 3884 K B-value B(25/100) 25 3964 K Vincotech NTC Reference Copyright Vincotech F 6 27 Oct. 2015 / Revision 1 10-FZ062TA015SM-P985D13 target datasheet Ordering Code & Marking Version without thermal paste 12mm housing NN-NNNNNNNNNN NNNN-TTTTTTTVV Vinco LLLLL WWYY SSSS UL Ordering Code 10-FZ062TA015SM-P985D13 Text Datamatrix in DataMatrix as P985D13 in packaging barcode as P985D13 Name Type&Ver Date code Vinco&Lot Serial&UL NN-NNNNNNNNNNNNNN TTTTTTTVV WWYY Vinco LLLLL SSSS UL Type&Ver Lot number Serial Date code TTTTTTTVV LLLLL SSSS WWYY Outline Pin table [mm] Pin X Y Function 1 33,5 0 Therm1 2 33,5 2,8 Therm2 3 29,5 2,8 S1sh1 4 29,5 0 S2sh1 5 26,7 0 DC- 6 23,9 0 DC- 7 Not assembled 8 14,85 0 S25 9 14,05 13,35 ST1 10 12,05 0 G25 11 12 13 9,5 14 3,9 0 S27 15 2,2 13,35 ST2 16 1,1 0 G27 17 0 22,7 PFC2 18 7,1 22,7 PFC+ 19 7,1 20,2 PFC+ 20 14,2 22,7 PFC1 21 20,7 22,7 G34 22 23,5 22,7 DC+ 23 26 22,7 DC+ 24 28,8 22,7 G32 25 33,5 18,55 ACIn1 26 33,5 16,05 ACIn1 27 33,5 8,7 ACIn2 28 31 8,7 ACIn2 12,05 PFC1Not assembled 6,7 12,05 PFC2- Copyright Vincotech 7 27 Oct. 2015 / Revision 1 10-FZ062TA015SM-P985D13 target datasheet Pinout Identification ID Component Voltage Current Function T25, T27 IGBT 650 V 15 A PFC Switch D25, D27 FWD 600 V 15 A PFC Diode D45, D47 FWD 650 V 10 A PFC Sw. Protection Diode D31-D34 Rectifier 1600 V 30 A Rectifier Diode D48 FWD 1600 V 30 A Shunt Protection Diode D26, D28 FWD 650 V 10 A Current Transformer Protection Diode SH1 Shunt - - Shunt Resistor C25, C27 Capacitor 1000 V - DC Link Capacitance Rt NTC - - Thermistor Copyright Vincotech 8 Comment 27 Oct. 2015 / Revision 1 10-FZ062TA015SM-P985D13 target datasheet Packaging instruction Standard packaging quantity (SPQ) 135 >SPQ Standard <SPQ Sample Handling instruction Handling instructions for flow 0 packages see vincotech.com website. Package data Package data for flow 0 packages see vincotech.com website. Document No.: Date: 10-FZ062TA015SM-P985D13-T1-14 27 Oct. 2015 Modification: Pages Product status definition Datasheet Status Product Status Target Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. The data contained is exclusively intended for technically trained staff. DISCLAIMER The information, specifications, procedures, methods and recommendations herein (together “information”) are presented by Vincotech to reader in good faith, are believed to be accurate and reliable, but may well be incomplete and/or not applicable to all conditions or situations that may exist or occur. Vincotech reserves the right to make any changes without further notice to any products to improve reliability, function or design. No representation, guarantee or warranty is made to reader as to the accuracy, reliability or completeness of said information or that the application or use of any of the same will avoid hazards, accidents, losses, damages or injury of any kind to persons or property or that the same will not infringe third parties rights or give desired results. It is reader’s sole responsibility to test and determine the suitability of the information and the product for reader’s intended use. LIFE SUPPORT POLICY Vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of Vincotech. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Copyright Vincotech 9 27 Oct. 2015 / Revision 1