UNISONIC TECHNOLOGIES CO., LTD U74AUP1G14 CMOS IC LOW-POWER SINGLE SCHMITT-TRIGGER INVERTER DESCRIPTION This U74AUP1G14 functions as an independent gate with Schmitt-trigger inputs, which allows for slow input transition and better switching-noise immunity at the input. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8V to 3.6V. This device has power-down protective circuit, preventing device destruction when it is powered down. FEATURES * Wide supply voltage range from 0.8V to 3.6V * Inputs accept voltages up to 3.6V * IOFF supports partial-power-down mode * Low static power consumption; ICC=0.5μA (Max.) * Optimized for 3.3V Operation ORDERING INFORMATION Ordering Number U74AUP1G14G-AE5-R U74AUP1G14G-AL5-R Package SOT-23-5 SOT-353 Packing Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 6 QW-R502-885.B U74AUP1G14 PIN CONFIGURATION FUNCTION TABLE (each gate) CMOS IC INPUT (A) OUTPUT (Y) L H H L Note: H: HIGH voltage level; L: LOW voltage level LOGIC DIAGRAM (positive logic) Logic symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw IEC logic symbol 2 of 6 Ver.A U74AUP1G14 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER Supply Voltage Input Voltage Output Voltage SYMBOL VCC VIN VOUT TEST CONDITIONS Output in the high or low state Output in the power-off state RATINGS -0.5 ~+4.6 -0.5 ~+4.6 -0.5 ~ VCC +0.5 -0.5 ~ +4.6 UNIT V V V V Continuous VCC or GND ICC ±50 mA Current Continuous Output Current IOUT VOUT=0 ~ VCC ±20 mA Input Clamp Current IIK VIN<0 -50 mA Output Clamp Current IOK VOUT >VCC or VOUT<0 -50 mA Storage Temperature Range TSTG -65 ~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage Operating Temperature Input Transition Rise or Fall Rate SYMBOL VCC VIN VOUT TA ∆t/∆v TEST CONDITIONS Operating High or low state MIN 0.8 0 0 -40 TYP VCC=0.8V ~ 3.6V MAX 3.6 3.6 VCC 85 UNIT V V V °C 200 ns/V MAX 0.6 0.9 1.11 1.29 1.77 2.29 0.6 0.65 0.75 0.84 1.04 1.24 0.5 0.46 0.56 0.66 0.92 1.31 UNIT V V V V V V V V V V V V V V V V V V V V V V V V V V ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER SYMBOL Positive-Going Input Threshold Voltage VT+ Negative-Going Input Threshold Voltage VT- Hysteresis Voltage (VT+-VT-) △VT High-Level Output Voltage VOH TEST CONDITIONS VCC =0.8V VCC =1.1V VCC =1.4V VCC =1.65V VCC =2.3V VCC =3V VCC =0.8V VCC =1.1V VCC =1.4V VCC =1.65V VCC =2.3V VCC =3V VCC =0.8V VCC =1.1V VCC =1.4V VCC =1.65V VCC =2.3V VCC =3V VCC =0.8V ~ 3.6V, IOH=-20μA VCC =1.1V, IOH=-1.1mA VCC =1.4V, IOH=-1.7mA VCC =1.65V, IOH=-1.9mA IOH=-2.3mA VCC =2.3V IOH=-3.1mA IOH=-2.7mA VCC =3V IOH=-4mA UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 0.3 0.53 0.74 0.91 1.37 1.88 0.1 0.26 0.39 0.47 0.69 0.88 0.07 0.08 0.18 0.27 0.53 0.79 VCC-0.1 0.75×VCC 1.11 1.32 2.05 1.9 2.72 2.6 TYP 3 of 6 Ver.A U74AUP1G14 CMOS IC ELECTRICAL CHARACTERISTICS (Cont.) PARAMETER Low-Level Output Voltage Input Leakage Current Power OFF Leakage Current Additional Power OFF Leakage Current Quiescent Supply Current SYMBOL VOL II(LEAK) IOFF ∆Ioff ICC Additional Quiescent Supply Current ∆ICC Input Capacitance CI Output Capacitance COUT TEST CONDITIONS VCC=0.8V ~ 3.6V, IOH=20μA VCC=1.1V, IOH=1.1mA VCC=1.4V, IOH=1.7mA VCC=1.65V, IOH=1.9mA IOH=2.3mA VCC=2.3V IOH=3.1mA IOH=2.7mA VCC=3V IOH=4mA VCC=0V ~ 3.6V, VIN=VCC or GND VCC=0V, VIN or VCC=3.6V VCC=0V~0.2V, VIN or VOUT=0V~3.6V VCC=0.8V ~3.6V, IOUT=0 VIN=VCC or GND VCC=3.3V, One input at VCC-0.6V, other inputs at VCC or GND VCC=0V, VIN=VCC or GND VCC=3.6V, VIN=VCC or GND VCC =0V, VOUT=GND MIN TYP MAX 0.1 0.3×VCC 0.31 0.31 0.31 0.44 0.31 0.44 ±0.1 ±0.2 UNIT V V V V V V V V μA μA ±0.2 μA 0.5 μA 40 μA 1.5 1.5 2.5 pF pF pF SWITCHING CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER Propagation delay from input (A) to output(Y) SYMBOL tPLH/tPHL TEST CONDITIONS VCC=0.8V VCC=1.2V±0.1V CL=5pF, VCC=1.5V±0.1V RL=1MΩ VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V VCC=0.8V VCC=1.2V±0.1V CL=10pF, VCC=1.5V±0.1V RL=1MΩ VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V VCC=0.8V VCC=1.2V±0.1V CL=15pF, VCC=1.5V±0.1V RL=1MΩ VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V VCC=0.8V VCC=1.2V±0.1V VCC=1.5V±0.1V CL=30pF, RL=1MΩ VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 3.0 2.6 2.2 2.0 1.9 3.5 3.0 2.7 2.4 2.4 3.9 3.3 3.0 2.8 2.7 5.1 4.3 3.9 3.6 3.5 TYP 20.3 6.9 5.2 4.4 3.5 3 23.9 7.9 6 5 4 3.5 27.3 8.7 6.7 5.6 4.5 3.9 25.7 11.2 8.5 7.2 5.7 5 MAX UNIT ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 4 of 6 Ver.A U74AUP1G14 CMOS IC OPERATING CHARACTERISTICS (f=10MHz, TA =25°C , unless otherwise specified) PARAMETER Power Dissipation Capacitance SYMBOL CPD TEST CONDTIONS VCC=0.8V VCC=1.2V±0.1V VCC=1.5V±0.1V VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 4 4 4.1 4.1 4.3 4.4 MAX UNIT pF pF pF pF pF pF 5 of 6 Ver.A U74AUP1G14 CMOS IC TEST CIRCUIT AND WAVEFORMS Note: CL includes probe and jig capacitance. VCC 0.8V 1.2V±0.1V 1.5V±0.1V 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V VIN VCC VCC VCC VCC VCC VCC t R / tF ≤3ns ≤3ns ≤3ns ≤3ns ≤3ns ≤3ns VM VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 CL 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF RL 1MΩ 1MΩ 1MΩ 1MΩ 1MΩ 1MΩ UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 Ver.A