UNISONIC TECHNOLOGIES CO., LTD U74AUP1G07 CMOS IC LOW-POWER BUFFER WITH OPEN-DRAIN OUTPUT DESCRIPTION The U74AUP1G07 provides the single non-inverting buffer with open-drain output. The output of the device is an open drain and can be connected to other open-drain outputs to implement active-LOW wire-OR active-HIGH wire-AND functions. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8V to 3.6V. This device has power-down protective circuit, preventing device destruction when it is powered down. FEATURES * Wide supply voltage range from 0.8V to 3.6V * Inputs accept voltages up to 3.6V * IOFF supports partial-power-down mode * Low static power consumption; ICC=0.5μA (Max.) * Optimized for 3.3V Operation ORDERING INFORMATION Ordering Number U74AUP1G07G-AE5-R U74AUP1G07G-AL5-R U74AUP1G07G-K06-1010-R Package SOT-23-5 SOT-353 DFN-6(1.0×1.0) Packing Tape Reel Tape Reel Tape Reel MARKING SOT-23-5 / SOT-353 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd DFN-6(1.0×1.0) 1 of 5 QW-R502-928.D U74AUP1G07 CMOS IC PIN CONFIGURATION FUNCTION TABLE (each gate) INPUT (A) L H Note: H: HIGH voltage level; OUTPUT (Y) L Z L: LOW voltage level; Z: high impedance state. LOGIC DIAGRAM (positive logic) Logic symbol IEC logic symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-928.D U74AUP1G07 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER Supply Voltage Input Voltage Output Voltage SYMBOL VCC VIN VOUT TEST CONDITIONS RATINGS -0.5 ~+4.6 -0.5 ~+4.6 -0.5 ~ VCC +0.5 -0.5 ~ +4.6 Output in the high or low state Output in the power-off state UNIT V V V V Continuous VCC or GND ICC ±50 mA Current Continuous Output Current IOUT VOUT=0 ~ VCC ±20 mA Input Clamp Current IIK VIN<0 -50 mA Output Clamp Current IOK VOUT >VCC or VOUT<0 -50 mA Storage Temperature Range TSTG -65 ~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage Operating Temperature Input Transition Rise or Fall Rate SYMBOL VCC VIN VOUT TA ∆t/∆v TEST CONDITIONS Operating High or low state MIN 0.8 0 0 -40 TYP VCC=0.8V ~ 3.6V MAX 3.6 3.6 VCC 85 UNIT V V V °C 200 ns/V MAX 0.3×VCC 0.35×VCC 0.7 0.9 0.1 0.3×VCC 0.31 0.31 0.31 0.44 0.31 0.44 ±0.1 UNIT V V V V V V V V V V V V V V V V μA ±0.1 μA ±0.2 μA ±0.2 μA 0.5 μA 40 μA STATIC CHARACTERISTICS (TA =25°C, unless otherwise specified) PARAMETER HIGH-level Input Voltage SYMBOL VIH LOW-level Input Voltage VIL Low-Level Output Voltage VOL Input Leakage Current II(LEAK) OFF-State Output Current IOZ Power OFF Leakage Current Additional Power-off Leakage Current IOFF Quiescent Supply Current Additional Quiescent Supply Current ∆IOFF ICC ICC nput Capacitance CI Output Capacitance COUT TEST CONDITIONS MIN VCC =0.8V 0.7×VCC VCC =0.9V ~ 1.95V 0.65×VCC VCC =2.3V ~ 2.7V 1.6 2.0 VCC =3V ~ 3.6V VCC =0.8V VCC =0.9V ~ 1.95V VCC =2.3V ~ 2.7V VCC =3V to 3.6V VCC =0.8V ~ 3.6V, IOH=20μA VCC =1.1V, IOH=1.1mA VCC =1.4V, IOH=1.7mA VCC =1.65V, IOH=1.9mA IOH=2.3mA VCC =2.3V IOH=3.1mA IOH=2.7mA VCC =3V IOH=4mA VCC =0V ~ 3.6V, VIN=VCC or GND VCC=0V ~3.6V, VIN=VIH, VO=0V~3.6V VCC =0V, VIN or VO=0V~3.6V VCC=0V~0.2V, VIN or VO=0V~3.6V VCC =0.8V ~3.6V, VIN=VCC or GND IOUT=0 VCC =3.3V, One input at VCC-0.6V, Other inputs at VCC or GND VCC=0V, VIN=VCC or GND VCC=3.6V, VIN=VCC or GND VCC =0V, VOUT=GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP 1.5 1.7 1.7 pF pF pF 3 of 5 QW-R502-928.D U74AUP1G07 DYNAMIC CHARACTERISTICS (TA =25°C, unless otherwise specified) PARAMETER Propagation delay from input (A) to output(Y) CMOS IC SYMBOL tPD TEST CONDITIONS VCC=0.8V VCC=1.2V±0.1V CL=5pF, VCC=1.5V±0.1V RL=5KΩ VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V VCC=0.8V VCC=1.2V±0.1V CL=10pF, VCC=1.5V±0.1V RL=5KΩ VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V VCC=0.8V VCC=1.2V±0.1V CL=15pF, VCC=1.5V±0.1V RL=5KΩ VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V VCC=0.8V VCC=1.2V±0.1V VCC=1.5V±0.1V CL=30pF, RL=5KΩ VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V MIN 2.1 1.6 1.6 1.1 1.4 3 2.3 2.4 1.7 2.2 3.5 3 2.8 2.4 2.2 4.8 4.1 3.8 3.7 3.6 TYP 12.2 5.1 3.6 3.1 2.1 2.2 15 6.2 4.4 3.9 2.8 3.0 18.2 7.3 5.2 4.8 3.4 3.7 26.5 10.7 7.7 7.5 5.4 6.3 MAX UNIT ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns OPERATING CHARACTERISTICS (f =1 MHz; VI=VCC or GND, TA =25°C, unless otherwise specified) PARAMETER Power Dissipation Capacitance SYMBOL CPD TEST CONDTIONS VCC=0.8V VCC=1.2V±0.1V VCC=1.5V±0.1V VCC=1.8V±0.15V VCC=2.5V±0.2V VCC=3.3V±0.3V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 1.0 1.0 1.0 1.0 1.0 1.0 MAX UNIT pF pF pF pF pF pF 4 of 5 QW-R502-928.D U74AUP1G07 CMOS IC TEST CIRCUIT AND WAVEFORMS Note: Since this device has open drain outputs, the tPLZ and tPZL is the same as tPLH and tPHL . VCC 0.8 1.2±0.1V 1.5±0.1V 1.8±0.15V 2.5±0.2V 3.3±0.3V VIN VCC VCC VCC VCC VCC VCC t R / tF 3ns 3ns 3ns 3ns 3ns 3ns VM VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 VLOAD 2×VCC 2×VCC 2×VCC 2×VCC 2×VCC 2×VCC CL 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF RL 5kΩ 5kΩ 5kΩ 5kΩ 5kΩ 5kΩ V△ 0.1V 0.1V 0.1V 0.15V 0.15V 0.3V UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-928.D