UNISONIC TECHNOLOGIES CO., LTD U74HC2G32 CMOS IC 2-INPUT OR GATE DESCRIPTION The U74HC2G32 is a 2-input OR gate which provides the Function Y=A+B. FEATURES * Operation Voltage Range: 2.0~6.0V * Low Power Dissipation: ICC=10μA(Max) * High Speed: tpd=9ns(Vcc=4.5V, CL=50pF) *Specified from -40 to +85℃ and -40 to +125℃ ORDERING INFORMATION Ordering Number Lead Free U74HC2G32L-SM1-R U74HC2G32L-SM1-T Halogen Free U74HC2G32G-SM1-R U74HC2G32G-SM1-T www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd Package Packing MSOP-8 MSOP-8 Tape Reel Tube 1 of 5 QW-R502-083.B U74HC2G32 CMOS IC PIN CONFIGURATION 1A 1 8 VCC 1B 2 7 1Y 2Y 3 6 2B GND 4 5 2A FUNCTION TABLE (each gate) INPUT A L L H H B L H L H OUTPUT Y L H H H LOGIC DIAGRAM (positive logic) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-083.B U74HC2G32 CMOS IC ABSOLUTE MAXIMUM RATING (unless otherwise specified)(Note 1) PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5~7 V Input Voltage VIN -0.5~7 V Output Voltage VOUT -0.5~VCC+0.5 V Input Clamp Current IIK ±20 mA Output Clamp Current IOK ±20 mA Output Current IOUT 25 mA VCC or GND Current ICC 50 mA Power Dissipation PD 300 mW Storage Temperature TSTG -65 ~ +150 ℃ Note 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING COMDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage SYMBOL VCC VIN VOUT CONDITIONS MIN 2.0 0 0 TYP 5.0 MAX 6.0 VCC VCC 1000 UNIT V V V 6 500 400 125 ns VCC=2.0V Input Transition Rise or Fall Times tR ,tF Operating Temperature VCC=4.5V VCC=6V TA -40 25 ℃ STATIC CHARACTERISTICS PARAMETER High-Level Input Voltage VIH Low-Level Input Voltage VIL High-Level Output Voltage VOH Low-Level Output Voltage Input Leakage Current TA=25℃ TYP MAX VCC=2.0V 1.2 VCC=4.5V 2.4 VCC=6.0V 3.2 VCC=2.0V 0.8 0.5 VCC=4.5V 2.1 1.35 VCC=6.0V 2.8 1.8 VCC=2.0V, IOH=-20μA 1.9 2.0 VCC=4.5V, IOH=-20μA 4.4 4.5 VCC=6.0V, IOH=-20μA 5.9 6.0 VCC=4.5V, IOH=-4mA 4.18 4.32 VCC=6.0V, 5.68 5.81 IOH=-5.2mA VCC=2.0V, IOL=20μA 0 0.1 VCC=4.5V, IOL=20μA 0 0.1 VCC=6.0V, IOL=20μA 0 0.1 VCC=4.5V, IOH=4mA 0.15 0.26 VCC=6.0V, IOH=5.2mA 0.16 0.26 VCC=6.0V, VIN=VCC or ±0.1 GND VCC=6.0V, VIN=VCC or 1 GND, IOUT=0 VCC=5.0V, VIN=VCC or 1.5 GND SYMBOL TEST CONDITIONS VOL II(LEAK) Quiescent Supply Current IQ Input Capacitance CIN UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.5 3.15 4.2 -40~85℃ MIN MAX 1.5 3.15 4.2 0.5 1.35 1.8 1.9 4.4 5.9 4.13 -40~125℃ MIN MAX 1.5 3.15 4.2 0.5 1.35 1.8 1.9 4.4 5.9 3.7 5.63 5.2 UNIT V V V 0.1 0.1 0.1 0.33 0.33 0.1 0.1 0.1 0.4 0.4 V ±1 ±1 μA 10 20 μA pF 3 of 5 QW-R502-083.B U74HC2G32 CMOS IC DYNAMIC CHARACTERISTICS (Input: tR,tF≤6ns;PRR≤1MHz) See Fig-1 and Fig-2 for test circuit and waveforms. PARAMETER SYMBOL TEST CONDITIONS TA=25℃ MIN TYP MAX 24 75 9 15 7 13 18 75 6 15 5 13 -40~85℃ MIN MAX 95 19 16 95 19 16 VCC= 2.0, CL= 50pF Propagation Delay From Input (A and B) to tPHL /tPLH VCC= 4.5, CL= 50pF Output(Y) VCC= 6.0, CL= 50pF VCC= 2.0, CL= 50pF Output Transition Time tTHL /tTLH VCC= 4.5, CL= 50pF VCC= 6.0, CL= 50pF Operating Characteristics PARAMETER SYMBOL TEST CONDITIONS Power Dissipation Capacitance Cpd No load, f=1MHz, VCC=5 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw -40~125℃ MIN MAX 110 22 20 125 25 20 TYP 10 UNIT ns ns UNIT pF 4 of 5 QW-R502-083.B U74HC2G32 CMOS IC TEST CIRCUIT AND WAVEFORMS Note: CL includes probe and jig capacitance. Fig.1 Load circuitry for switching times. 1/2 * VCC Input 1/2 * VCC tPLH tPHL 90% 1/2 * VCC Output 90% 1/2 * VCC 10% 10% tTLH tTHL Fig. 2 Propagation delay from input(A and B) to output(Y) and Output transition time. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-083.B