V i shay I n tertech n o l o g y, I n c . Resistors - All Electrical Angles Available up to 360° I INNOVAT AND TEC O L OGY 981 HE N HN HALL-EFFECT SENSOR O 19 62-2012 Throttle-Position, Hall-Effect Sensor, Hollow and D-Shaft Versions Key Benefits • • • • • • Continuous, drift-free performance over the life of the device All electrical angles available up to 360º - no dead band Available in spring-loaded version Hollow shaft or D-shaft versions available Designed for use in harsh environments Extremely easy and fast mounting APPLICATIONS • • • • • • • Foot-pedal position sensors Throttle position sensors Steering position sensors Drive-by-wire Lift-and-shuttle position sensors Tilt control and tilt-positioning feedback Suspension-system position sensors Resources • Datasheet: 981 HE - http://www.vishay.com/doc?57103 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0154-1202 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i shay I n tertech n o l o g y, I n c . I INNOVAT 19 Vishay Spectrol 62-2012 Throttle-Position, Hall-Effect Sensor, Throttle Hollow Positionand Sensor in Hall Effect Technology D-Shaft Versions Hollow and D-Shaft Versions FEATURES • Accurate linearity down to: ± 0.5 % • Easy mounting principle • Non contacting technology: Hall effect • Model dedicated to all applications in harsh environments • Spring loaded types available ELECTRICAL SPECIFICATIONS PARAMETER Electrical Angle Linearity Supply Voltage Supply Current STANDARD SPECIAL 90°, 120°, 180°, 270°, 360° Any other angle upon request ±1% ± 0.5 % Other upon request 5 VDC ± 10 % 10 mA typical/16 mA max. 16 mA for PWM output Analog ratiometric 10 % to 90 % of Vsupply or Other upon request PWM 1 kHz, 10 % to 90 % duty cycle + 20 VDC - 10 VDC Min. 1 kΩ for analog output and PWM output < 0.3° Output Signal Over Voltage Protection Reverse Voltage Protection Load Resistance Recommended Hysteresis Static (D-Shaft Version) MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel Bearing type Standard Weight 360° continuous, stops upon request: 124° ± 3° Sleeve bearing IP 50; other on request 19 g ± 2 g Hollow shaft model/22 g ± 2 g D-Shaft model ORDERING INFORMATION/DESCRIPTION 981HE 0 A 1 ELECTRICAL MODEL FEATURES LINEARITY ANGLE 0: Continuous rotation A: ± 1 % 1: Mechanical stops B: ± 0.5 % 2: Spring return CW 3: Spring return CCW W A 1F16 XXXX OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST 1: 90° W: Wires 2: 180° Z: Custom 3: 270° 4: 360° 5: 120° 9: Other angles A: Analog CW 1: 6.35 mm B: Analog CCW 9: Special C: PWM CW P: Plain D: PWM CCW F: Flatted Z: Other output S: Slotted Z: Other type BO 10 e1 PACKAGING LEAD FINISH Box of 10 pieces Shaft length from mounting face (Standard: 16 mm) 8H00 Hollow shaft 8H01 Hollow D-Shaft Revision 17-Dec-09 Resistors - All Electrical Angles Available up to 360° AND TEC O L OGY 981 HE Model 981 HE N HN HALL-EFFECT SENSOR O SAP PART NUMBERING GUIDELINES 981HE 1 MODEL MECHANICAL FEATURES www.vishay.com 1 PRODUCT SHEET B 9 Z C 8H01 XXXX LINEARITY ELECTRICAL ANGLE OUTPUT TYPE OUTPUT SIGNAL SHAFT TYPE SPECIAL REQUEST For technical questions, contact: [email protected] 2/2 Document Number: 57103 Revision: 17-Dec-09 VMN-PT0154-1202 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000