V ishay I nterte c hnolo g y, I n c . Potentiometer - All Electrical Angles Up to 3600° I INNOVAT AND TEC O L OGY 34 THE N HN HALL EFFECT SENSOR O 19 62-2012 10 Turns Servo or Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm) Key Benefits • • • • • • • All electrical angles available up to 3600° Accurate linearity down to ± 0.5 % Very long life: 50M cycles for servo, 10M cycles for bushing Non contacting Hall effect technology: true power on sensor Model dedicated to applications requiring long life Single and redundant signals available 3 types of output signals: analog or PWM or SPI APPLICATIONS • Marine applications • Off-road applications Resources • Datasheet: 34 THE - http://www.vishay.com/doc?57114 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0336-1210 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V ishay I nterte c hnolo g y, I n c . AND TEC 34 THE34 THE 19 www.vishay.com 62-2012 Vishay Spectrol Vish 10 Ten Turns Servo or or Bushing Effect Turns Servo Ten Bushing Turns Mount Servo MountorHall Hall Bushing Effect Mount Hall Effect Sensor ininSize (22.2 mm) Sensor Size09 09Sensor (22.2 mm) in Size 09 (22.2 mm) FEATURES FEATURES • All electrical angles available up • All to: electrical 3600° angles available up to: 360 • Accurate linearity down to: ± 0.5 • Accurate % linearity down to: ± 0.5 % • Very long life: 50M cycles for servo, • Very10M longcycles life: 50M cycles for servo, 10M for bushing for bushing • Non contacting technology: Hall • Non effect; contacting true power technology: on Hall effec sensor sensor • Model dedicated to applications • Model requiring dedicated long lifeto applications requirin QUICK REFERENCE DATAQUICK REFERENCE DATA • Material categorization: For •definitions Material categorization: of compliance For definition Sensor type Multi TurnSensor ROTATIONAL, type hall effect Multi Turn ROTATIONAL, hall effect please see www.vishay.com/doc?99912 please see www.vishay.com/doc?99912 Output type Market appliance Dimensions Wires Output or rear typeturrets Market Industrial appliance Dimensions 7/8" (22.2 mm) Wires or rear turrets Industrial 7/8" (22.2 mm) ELECTRICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS PARAMETER Electrical angle Linearity Supply voltage Supply current PARAMETER Electrical angle Linearity Supply voltage Supply current Output signal Over voltage protection Reverse voltage protection Load resistance recommended Hysteresis static STANDARD STANDARD SPECIAL SPECIAL 10 turns 3600° 10 turns Any other 3600°angle upon request Any other angle up ±1% ±1% ± 0.5 % ± 0.5 % Other % upon request Other upon re 5 VDC ± 10 % 5 VDC ± 10 < 16 mA for single < 16 mA for < 32 single mA for redundant < 32 mA for red Analog ratiometric 1 % to 99 % of Vsupply Analog ratiometric 1 % to 99 % of Vsupply (other on reques (other on request) Output signal or PWM 1 kHz, 10 % to 90 % duty cycle or PWM or SPI 1 kHz, binary 10 on % 5toV90 or% binary duty on cycle 3.3 or V SPI binary on 5 V or bin Over voltage protection + 20 VDC + 20 VDC Reverse voltage protection - 10 VDC - 10 VDC Load resistance recommended Min. 1 k for analog output and PWM Min. output 1 k for analog output and PWM output Hysteresis static 10° on drive shaft 10° on drive shaft MECHANICAL SPECIFICATIONS MECHANICAL SPECIFICATIONS PARAMETER Mechanical travel Bearing type Standard Resolution PARAMETER Mechanical travel Bearing type Standard Resolution 3600° continuous 3600° continuous A sleeve bearing for bushing model/2A ball sleeve bearings bearing forfor servo bushing model model/2 ball bearings for servo m IP 50; other on request IP 50; other on request 12 bits for analog and PWM, 14 bits 12 for bits SPI for analog and PWM, 14 bits for SPI ORDERING INFORMATION/DESCRIPTION ORDERING INFORMATION/DESCRIPTION 34 THE 1 34 THE A B T 1 A A 2S22 T XXXX A BO 1 2S22 e1 XXXX NUMBER OF MOUNTING OUTPUT NUMBER OFOUTPUT SHAFT OUTPUT SPECIAL OUTPUT SHAFT LEAD SPECIAL MODEL LINEARITY LINEARITY PACKAGING PAC SIGNALS TYPE TYPESIGNALS SIGNAL TYPE TYPE REQUEST SIGNAL TYPE FINISH REQUEST 1: Single A: ± 1B:%Bushing T: Turrets 1: SingleA: Analog A: ±CW 1 % 2: 3.175 T: Turrets A: Analog CWBox of mm 2: 3.175 mm 2: Redundant B: ± 0.5S: %Servo Z: Custom 2: Redundant B: Analog B: ±CCW 0.5 % 9:Z:Special Custom B: Analog CCW 1 piece9: Special 1 W: Wires C: PWM CW W:Plain Wires C: PWM CW P: P: Plain D: PWM CCW D: PWM CCW S: Slotted S: Slotted E: SPI CW (1) E: SPI CW (1) Z: Other type Z: Other type (1) (1) F: SPI CCW F: SPI CCW G: Analog G: Analog inverted slope inverted slope H: PWM inverted H: PWM inverted slope slope K: SPI inverted K: SPI inverted slope (1) slope (1) Z: Other output Z: Other output Shaft length from mounting face standard: Shaft length 22 mmfrom mounting face standard Note Note (1) SPI output output type: Wires (1) SPI output output type: Wires MODEL Revision 25-Jul-12 Potentiometer - All Electrical Angles Up to 3600° www.vishay.com O L OGY INNOVAT I N HN HALL EFFECT SENSOR O B MOUNTING TYPE B: Bushing S: Servo SAP PART NUMBERING GUIDELINES SAP PART NUMBERING GUIDELINES 34 THE MODEL Revision: 25-Jul-12 S SERVO TYPE 342THE 2 OUTPUT MODEL SIGNALS BS SERVO LINEARITY TYPE B: ± 0.5 % T2 OUTPUT 2 OUTPUT SIGNALS TYPE CB OUTPUT LINEARITY SIGNAL B: ± 0.5 % 2P12 T SHAFT OUTPUT TYPE TYPE XXXX C SPECIAL OUTPUT REQUEST SIGNAL Document Number: 57114 Docum 1 1 For technical questions, contact: [email protected] For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE THIS DOCUMENT WITHOUTISNOTICE. SUBJECT THE TOPRODUCTS CHANGE WITHOUT DESCRIBED NOTICE. HEREIN THEAND PRODUCTS THIS DOCUMENT DESCRIBED HEREIN AND THIS ARE SUBJECT TO SPECIFIC DISCLAIMERS, ARE SUBJECT SET FORTH TO SPECIFIC AT www.vishay.com/doc?91000 DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PRODUCT SHEET Revision: 25-Jul-12 2P12 SHAFT TYPE 2/2 VMN-PT0336-1210 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000