UNISONIC TECHNOLOGIES CO., LTD SB10100 Preliminary DIODE 10A SCHOTTKY BARRIER RECTIFIER DESCRIPTION The UTC SB10100 is a Schottky Rectifier with high current capacity and low forward voltage. The UTC SB10100 is suitable for polarity protection ,low voltage and high frequency inverters and free wheeling applications. FEATURES * Guard Ring Transient Protection * High surge Current Capability * High Current Capability * Low Forward Voltage SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free SB10100L-TA3-T SB10100G-TA3-T SB10100L-TF1-T SB10100G-TF1-T Note: Pin Assignment: A: Anode K: Cathode Package TO-220 TO-220F1 Pin Assignment 1 2 3 A K A A K A Packing Tube Tube MARKING www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 3 QW-R202-008.a SB10100 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA =25°C unless otherwise specified.) PARAMETER SYMBOL RATINGS UNIT Working Peak Reverse Voltage VRWM 100 V Repetitive Peak Reverse Voltage VRRM 100 V RMS Reverse Voltage VR(RMS) 70 V DC Blocking Voltage VR 100 V Average Rectified Output Current IO 10 V Non-repetitive Peak Forward Surge Current 8.3 ms IFSM 150 A Single Half-Sine-Wave Operating Temperature TJ -65~+150 °C Storage Temperature TSTG -65~+150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. THERMAL DATA PARAMETER SYMBOL θJA Junction to Ambient RATINGS 60 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA =25°C unless otherwise specified.) PARAMETER Reverse Breakdown Voltage (Note 1) SYMBOL V(BR)R TEST CONDITIONS IR=0.50mA IF=10A, TJ=25°C Forward Voltage Drop VFM IF=10A, TJ=100°C VR=100V, TJ=25°C Leakage Current (Note 1) IRM VR=100V, TJ=100°C Notes: 1. Short duration pulse test used to minimize self-heating effect. 2. Thermal resistance junction to case mounted on heatsink. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 100 TYP MAX UNIT V 0.85 V 0.80 V 500 μA 50 mA 2 of 3 QW-R202-008.a SB10100 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R202-008.a