Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MBR30200C
Preliminary
DIODE
30A, 200V SCHOTTKY BARRIER
RECTIFIER
1

DESCRIPTION
TO-220
The UTC MBR30200C is a 30A schottky barrier rectifier, it uses
UTC’s advanced technology to provide the customers with high surge
capability, high efficiency, high current capability, low power loss and
low forward voltage drop, etc.
The UTC MBR30200C is suitable for free wheeling and polarity
protection, etc.

1
TO-220F1
FEATURES
* Low reverse current
* High current capability
* Low power loss
* High efficiency
* For use in low voltage, high frequency inverters


SYMBOL
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MBR30200CL-TA3-T
MBR30200CG-TA3-T
MBR30200CL-TF1-T
MBR30200CG-TF1-T
Note: Pin Assignment: A: Anode
K: Cathode
MBR30200CL-TA3-T

Package
TO-220
TO-220F1
Pin Assignment
1
2
3
A
K
A
A
K
A
Packing
Tube
Tube
(1)Packing Type
(1) T: Tube
(2)Package Type
(2) TA3: TO-220, TF1: TO-220F1
(3)Green Package
(3) L: Lead Free, G: Halogen Free and Lead Free
MARKING
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 3
QW-R202-011.c
MBR30200C

Preliminary
DIODE
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Working Peak Reverse Voltage
Repetitive Peak Reverse Voltage
Maximum RMS Reverse Voltage
DC Blocking Voltage
Average Rectified Output Current
Per Device
SYMBOL
VRWM
VRRM
VR(RMS)
VR
RATINGS
200
200
140
200
15
30
UNIT
V
V
V
V
A
A
RATINGS
62.5
1.8
3.3
UN IT
°C/W
°C/W
°C/W
Per Leg
IO
Total
Non-Repetitive Peak Forward Surge Current
IFSM
180
A
8.3ms Single Half-Sine-Wave
Operating Junction Temperature (Note 1)
TJ
-65~+150
°C
Storage Temperature (Note 1)
TSTG
-65~+150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

THERMAL CHARACTERISTICS
PARAMETER
Junction to Ambient
Junction to Case

SYMBOL
θJA
TO-220
TO-220F1
θJC
ELECTRICAL CHARACTERISTICS (Note 2) (TA=25°C, unless otherwise noted.)
PARAMETER
Reverse Breakdown Voltage
SYMBOL
V(BR)R
TEST CONDITIONS
MIN TYP MAX UNIT
IR=0.50mA
200
V
IF=15A, TC=25°C
0.90
V
Instantaneous Forward Voltage
VF
0.80
V
IF=15A, TC=125°C
VR=200V, TJ=25°C
50
μA
Instantaneous Reverse Current
IR
VR=200V, TJ=125°C
10
mA
Notes: 1. The heat generated must be less than the thermal conductivity from Junction to Ambient: PD/TJ<1/θJA.
2. Pulse Test: Pulse Width=300μs, Duty Cycle≤2.0%.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 3
QW-R202-011.c
MBR30200C
Preliminary
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R202-011.c