Datasheet

UNISONIC TECHNOLOGIES CO., LTD
US5V330
Preliminary
CMOS IC
WIDEBAND/VIDEO QUAD
2-CHANNEL MUX/DEMUX
WITH LOW ON-RESISTANCE
„
DESCRIPTION
The UTC’s US5V330 video switch is a 4bit 2-channel
multiplexer/demultiplexer with a single switch-enable input. Low
differential gain and phase make switch ideal for both RGB and
composite video switching applications.
Low On-Resistance and wide bandwidth make it ideal for video
and other applications. UTC’s US5V330 can replac the
U74HC4053 multiplier and buffer/ amplifier.
„
FEATURES
* Single supply operation: +5.0V
* Low Power Consumption (0.1µA typical)
* Wide bandwidth: 360 MHz (typical)
* Low On-Resistance: 5Ω (typical)
* Low crosstalk at 10 MHz: -48 db
* Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs
„
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
US5V330L-R16-R
US5V330G-R16-R
US5V330L-R16-T
US5V330G-R16-T
Note: xx: Output Voltage, refer to Marking Information.
www.unisonic.com.tw
Copyright © 2013 Unisonic Technologies Co., Ltd
Package
Packing
SSOP-16
SSOP-16
Tape Reel
Tube
1 of 6
QW-R502-908.a
US5V330
Preliminary
„
PIN CONFIGURATION
„
PIN DESCRIPTION
PIN NO.
1
2, 3, 5, 6, 10, 11, 13, 14
4, 7, 9, 12
8
15
16
„
PIN NAME
IN
S1A, S2A, S1B, S2B, S2C, S1C,
DA, DB DC, DD
GND
S2D, S1D
EN
VCC
CMOS IC
DESCRIPTION
Select Input
Analog Video I/O
Analog Video I/O
Ground
Enable
Power
TRUTH TABLE
EN
0
0
1
IN
0
1
X
FUNCTIONAL
DA=S1A, DB=S1B, DC=S1C, DD=S1D
DA=S2A, DB=S2B, DC=S2C, DD=S2D
DA=Z, DB= Z, DC= Z, DD= Z
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 6
QW-R502-908.a
US5V330
„
Preliminary
CMOS IC
BLOCK DIAGRAM
DA 4
DB 7
DC 9
DD 12
IN 1
2
S1 A
3
S2 A
5
S1 B
6
S2 B
11
S1 C
10
S2 C
14
S1 D
13
S2 D
Control Logic
EN 15
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 6
QW-R502-908.a
US5V330
„
Preliminary
CMOS IC
ABSOLUTE MAXIMUM RATING
(Which the useful life may be impaired. For user guidelines, not tested.)
PARAMETER
SYMBOL
RATINGS
UNIT
-0.5~+7.0
V
Supply Voltage to Ground Potential (Inputs & VCC Only)
VDC
Supply Voltage to Ground Potential (Outputs & D/O Only)
-0.5~+7.0
V
DC Input Voltage
VIO
-0.5~+7.0
V
DC Output Current
IIO
120
mA
Power Dissipation
PD
0.5
W
Storage Temperature
TSTG
-65~+150
°C
Ambient Temperature with Power Applied
TA
-40~+85
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
„
DC ELECTRICAL CHARACTERISTICS
(Over the Operating Range, TA=-40°C~+85°C, VCC=5V±5%)
PARAMETER
Analog Signal Range
Input HIGH Voltage
Input LOW Voltage
Input HIGH Current
Input LOW Current
Analog Output Leakage Current
Clamp Diode Voltage
Input Hysteresis at Control Pins
SYMBOL
VANALOG
VIH
VIL
IIH
IIL
IO
VIK
VH
TEST CONDITIONS (Note 1)
Guaranteed Logic HIGH Level
Guaranteed Logic LOW Level
VCC=Max., VIN=VCC
VCC=Max., VIN=GND
0 ≤ S1, S2 or D ≤VCC, Switch OFF
VCC=Min., IIN=-18mA
MIN
0
2.0
-0.5
TYP
MAX
(Note 2)
2.0
0.8
±1
±1
±1
-1.2
150
VCC=Min., VIN=1.0V, ION=13mA
5
7
Switch On-Resistance (Note 3)
RON
VCC=Min., VIN=2.0V, ION=26mA
7
10
Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the
applicable device type.
2. Typical values are at VCC=5.0V, TA=25°C ambient and maximum loading.
3. Measured by the voltage drop between S1, S2, and D I/O pins at indicated current through the switch.
On-Resistance is determined by the lower of the voltages on the S1, S2, and D I/O pins.
„
-0.7
UNIT
V
V
V
µA
µA
µA
V
mV
Ω
Ω
DYNAMIC CHARACTERISTICS (Over the Operating Range, TA=-40°C~+85°C, VCC=5V±5%)
PARAMETER
Turn On Time
Turn Off Time
SYMBOL
TEST CONDITIONS
MIN
tON
RL=75Ω, CL=20PF, See Fig. 1
tOFF
RL=75Ω, CL=20PF, See Fig. 1
BW
See Fig. 2
-3 dB Bandwidth
(Note)
Crosstalk
XTALK
10MHz, See Fig. 2
CIN
VIN= 0V, f=1MHz
Input/Enable Capacitance
(Note)
COFF
VIN=0V, f=1MHz
Capacitance, Switch Off
(Note)
CON
VIN= 0V, f=1MHz
Capacitance, Switch On
(Note)
Off Isolation
OIRR
10MHz, See Fig. 2
Note: This parameter is determined by device characterization but is not production tested.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
TYP
2.5
1.1
MAX
5
5
UNIT
ns
ns
400
MHz
-48
-36
dB
6
pF
6
pF
9
pF
dB
4 of 6
QW-R502-908.a
US5V330
„
Preliminary
CMOS IC
POWER CHARACTERISTICS
PARAMETER
Quiescent Power Supply
Current
Supply Current per Input @
TTL HIGH
Supply Current per Input per
MHz (Note 4)
SYMBOL
TEST CONDITIONS (Note 1)
ICC
VCC=Max.
IN=GND or VCC
∆ICC
VCC=Max.
IN=3.4V (Note 3)
MIN
TYP
MAX
(Note 2)
0.1
3.0
µA
2.5
mA
VCC=Max., S1, S2 and D Pins Open
ICCD
0.25
EN = GND Control Input Toggling 50%
Duty Cycle
Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the
applicable device.
2. Typical values are at VCC=5.0V, +25°C ambient.
3. Per TTL driven input (VIN=3.4V, control inputs only); S1, S2, and D pins do not contribute to ICC.
4. This current applies to the control inputs only and represent the current required to switch internal
capacitance at the specified frequency. The S1, S2, and D I/O pins generate no significant AC or DC
currents as they transition. This parameter is not tested, but is guaranteed by design.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
UNIT
mA
MHz
5 of 6
QW-R502-908.a
US5V330
„
Preliminary
CMOS IC
TYPICAL APPLICATION CIRCUIT
HP8753
S1
R1
T1
HP11667A
UTC
US5V330
Figure 2. Gain/Phase, Crosstalk, Off-Isolation
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 6
QW-R502-908.a