UNISONIC TECHNOLOGIES CO., LTD SBL3040C DIODE SCHOTTKY BARRIER RECTIFIER DIODES FEATURES * Guard Ring for Transient Protection * Low Power Loss, High Efficiency * High Surge Capability * High Current Capability and Low Forward Voltage Drop SYMBOL ORDERING INFORMATION Order Number Lead Free Halogen Free SBL3040CL-TA3-T SBL3040CG-TA3-T Note: Pin Assignment: A: Anode K: Cathode Package TO-220 Pin Assignment 1 2 3 A K A Packing Tube MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-018.C SBL3040C DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER Recurrent Peak Reverse Voltage RMS Voltage DC Blocking Voltage SYMBOL VRRM VRWM VR RATINGS 40 40 40 15 30 UNIT V V V Per Leg IF(AV) A Per Package Peak Forward Surge Current 8.3ms Single Half IFSM 250 A Sine-Wave Superimposed on Rated Load Per Diode Operating Junction Temperature TJ 150 °C Storage Temperature TSTG -55~+150 °C Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Thermal resistance junction to case mounted on heatsink. Average Forward Rectified Current THERMAL CHARACTERISTICS (TA =25°C, unless otherwise noted.) PARAMETER Junction to Case SYMBOL θJC RATINGS 1.5 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA =25°C, unless otherwise noted.) PARAMETER SYMBOL TEST CONDITIONS Instantaneous Forward Voltage (Note 1) VF TC=25°C, IF=15A Total Capacitance (Note 2) CT TC=25°C Instantaneous Reverse Current at Rated DC IR Blocking Voltage Per Diode (Note 1) TC=100°C Notes: 1. Pulse Test: 300μs pulse width, 1% duty cycle. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 0.55 V 450 pF 1.0 mA 75 mA 2 of 3 QW-R601-018.C SBL3040C DIODE UTC assum es no responsibility for equipm ent failures that result from using products at v alues that exceed, ev en m om entarily, rated v alues (such as m axim um ratings, operating condition ranges, or other param eters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or system s where m alfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The inform ation presented in this docum ent does not form part of any quotation or contract, is believ ed to be accurate and reliable and m ay be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-018.C