Document 536NR-1 Shielded Power Inductors – LPS5010 le. availab ns. n now for new desig ee io s r e v d fr e d n d e e n v g e Impro nd halo recomm . re not d free a and function par ts a d by new lea t These form, fi e c in la l p 0.cfm. ntica re re They a which are ide ft.com/lps501 s ra version ee www.coilc S • Very low DCR; excellent current handling • 5.0 × 5.0 mm footprint; less than 1.0 mm tall Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 70 – 75 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7″ reel; 3000/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.02 mm pocket depth (Refer to dimensional drawing for part orientation in tape.) Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Isat (A)5 Irms (A)6 DCR SRF Inductance2 max3 typ4 10% 20% 30% 20°C40°C Part number1 ±20% (µH) (Ohms)(MHz) drop drop drop rise rise LPS5010-471ML_ LPS5010-821ML_ LPS5010-152ML_ LPS5010-222ML_ LPS5010-332ML_ 0.47 0.038 2903.13.33.42.02.7 0.82 0.058 1952.32.52.61.21.5 1.5 0.072 1681.71.81.90.90 1.4 2.2 0.100 1441.41.51.60.88 1.2 3.3 0.125 1051.11.21.30.86 1.1 LPS5010-472ML_ 4.7 LPS5010-562ML_ 5.6 LPS5010-682ML_ 6.8 LPS5010-103ML_ 10 LPS5010-153ML_ 15 0.175760.95 1.11.10.85 0.98 0.240 75 0.900.971.000.750.92 0.255 71 0.820.900.930.740.85 0.350 51 0.660.720.740.730.80 0.500 39 0.550.590.620.680.75 LPS5010-223ML_ 22 LPS5010-333ML_ 33 LPS5010-473ML_ 47 LPS5010-683ML_ 68 LPS5010-104ML_100 0.670 1.05 1.45 2.00 3.10 32 0.470.510.530.460.62 26 0.380.420.430.400.55 20 0.310.340.360.330.44 15 0.260.290.300.250.35 12 0.210.230.240.210.28 LPS5010-124ML_120 LPS5010-154ML_150 LPS5010-224ML_220 LPS5010-334ML_330 LPS5010-474ML_470 3.50 4.25 6.25 8.60 12.7 11 0.200.220.230.190.25 9.0 0.180.200.210.170.23 7.0 0.150.160.170.150.20 5.5 0.120.130.140.130.185 4.5 0.090 0.110.110.110.150 LPS5010-564ML_560 LPS5010-684ML_ 680 LPS5010-105ML_1000 15.7 20.0 28.0 4.0 0.090 0.100.100.100.135 3.70.0900.0970.10 0.0900.125 3.00.0870.0960.10 0.0800.110 1. Please specify termination and packaging codes: LPS5010-105MLC Termination:L=RoHS compliant silver-palladiumplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tinlead (63/37). Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF ≥10 MHz. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 536NR-1 Revised 01/23/12 © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 536NR-2 Shielded SMT Power Inductors – LPS5010 Series Typical L vs Current Typical L vs Frequency 10000 10000 1000 µH 100 100 µH 10 10 µH 1 0.1 0.1 Current (A) 1 100 µH 100 10 µH 10 0.82 µH 1 0.82 µH 0.01 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 10 0.1 0.01 10 Frequency (MHz) 0.189 ±0.003* 4,80 ±0,076 Current Derating 120 110 100 0.189 ±0.003* 4,80 ±0,076 XXX X 90 80 70 Dash number 60 Winding direction Internal code 50 Recommended Land Pattern 40 30 20 10 0 25°C Percent of rated current 1 0.1 Isat Irms -40 -20 0 20 0.060 1,50 40 60 80 100 120 140 0.0354 ±0.004 ** 0.039 typ 1,00 Ambient temperature (°C) 0.134 3,40 0,90 ±0,10 0.217 5,51 0.0665 1,689 0.134 3,40 0.134 3,40 0.060 0.039 typ 1,00 1,52 0.134 3,40 0.217 5,51 are of the case not * Dimensions including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. optional tin-lead and tin-silver-copper ** For terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch (0,13 mm). Dimensions are in inches mm Packaging 1000/7″ reel; 3000/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.02 mm pocket depth Orientation of parts in packaging tape 123 US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] 123 123 Document 536NR-2 Revised 01/23/12 © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.