UNISONIC TECHNOLOGIES CO., LTD U74AUP1G04 CMOS IC SINGLE INVERTER GATE DESCRIPTION The UTC U74LVC1G04 is a single inverter gate, it provides the function Y = A . This device has power-down protective circuit, preventing device destruction when it is powered down. FEATURES * Wide supply voltage range from 0.8V to 3.6V * Inputs accept voltages up to 3.6V * IOFF supports partial-power-down mode * Low static power consumption; ICC=0.5μA (Max.) * Optimized for 3.3V Operation ORDERING INFORMATION Ordering Number U74AUP1G04G-AE5-R U74AUP1G04G-AL5-R U74AUP1G04G-K06-1010-R Package SOT-23-5 SOT-353 DFN-6(1.0×1.0) Packing Tape Reel Tape Reel Tape Reel MARKING SOT-23-5 / SOT-353 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd DFN-6(1.0×1.0) 1 of 5 QW-R126-026.A U74AUP1G04 PIN CONFIGURATION FUNCTION TABLE CMOS IC INPUT(A) OUTPUT(Y) H L L H Note: H: HIGH voltage level; L: LOW voltage level. LOGIC DIAGRAM (positive logic) For SOT-23-5/SOT-353 Logic symbol IEC logic symbol For DFN-6(1.0×1.0) Logic symbol UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw IEC logic symbol 2 of 5 QW-R126-026.A U74AUP1G04 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER Supply Voltage Input Voltage Output Voltage SYMBOL VCC VIN VOUT CONDITIONS Output in the high or low state Output in the power-off state RATINGS -0.5 ~+4.6 -0.5 ~+4.6 -0.5 ~ VCC +0.5 -0.5 ~ +4.6 UNIT V V V V Continuous VCC or GND ICC ±50 mA Current Continuous Output Current IOUT VOUT=0 ~ VCC ±20 mA Input Clamp Current IIK VIN<0 -50 mA Output Clamp Current IOK VO>VCC or VOUT<0 -50 mA Storage Temperature Range TSTG -65 ~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage Operating Temperature Input Transition Rise or Fall Rate SYMBOL VCC VIN VOUT TA ∆t/∆v TEST CONDITIONS Operating High or low state MIN 0.8 0 0 -40 TYP VCC=0.8V ~ 3.6V MAX 3.6 3.6 VCC 85 UNIT V V V °C 200 ns/V MAX UNIT V V V V V V V V V V V V V V V V V V V V V V V V ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER High-level Input Voltage Low-level Input Voltage High-Level Output Voltage Low-Level Output Voltage SYMBOL VIH VIL VOH VOL TEST CONDITIONS VCC=0.8V VCC=1.1V ~1.95V VCC=2.3V ~ 2.7V VCC=3V ~ 3.6V VCC=0.8V VCC=1.1V ~1.95V VCC=2.3V ~ 2.7V VCC=3V ~ 3.6V VCC=0.8 ~ 3.6V, IOH=-20μA VCC=1.1V, IOH=-1.1mA VCC=1.4V, IOH=-1.7mA VCC=1.65V, IOH=-1.9mA IOH=-2.3mA VCC=2.3V IOH=-3.1mA IOH=-2.7mA VCC=3V IOH=-4mA VCC=0.8 ~ 3.6V, IOH=-20μA VCC=1.1V, IOH=-1.1mA VCC=1.4V, IOH=-1.7mA VCC=1.65V, IOH=-1.9mA IOH=2.3mA VCC=2.3V IOH=3.1mA IOH=2.7mA VCC=3V IOH=4mA UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN VCC 0.65×VCC 1.6 2 TYP 0 0.35×VCC 0.7 0.9 VCC-0.1 0.75×VCC 1.11 1.32 2.05 1.9 2.72 2.6 0.1 0.3×VCC 0.31 0.31 0.31 0.44 0.31 0.44 3 of 5 QW-R126-026.A U74AUP1G04 ELECTRICAL CHARACTERISTICS (Cont.) PARAMETER Input Leakage Current Power OFF Leakage Current Additional Power OFF Leakage Current Quiescent Supply Current Additional Quiescent Supply Current Per Input Pin Input Capacitance Output Capacitance SYMBOL TEST CONDITIONS II(LEAK) VCC=0 ~ 3.6V, VIN=GND ~ 3.6V Ioff VCC=0 V, VIN or VOUT=0 ~ 3.6V VCC=0 V~0.2V, ∆Ioff VIN or VOUT=0 ~ 3.6V VCC=0.8 ~3.6V, VIN=VCC or GND, ICC IOUT=0 ∆ICC CI COUT MIN TYP VCC=3.3 V, VIN =VCC-0.6V, IOUT=0 VCC=0V, VIN=VCC or GND VCC=3.6V, VIN=VCC or GND VCC =0V, VOUT=GND MAX ±0.1 ±0.2 UNIT μA μA ±0.2 μA 0.5 μA 40 μA 1.5 1.5 3 pF pF pF SWITCHING CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER Propagation delay from input (A or B) to output(Y) CMOS IC SYMBOL tPLH / tPHL TEST CONDITIONS VCC=0.8V VCC=1.2±0.1V CL=5pF VCC=1.5±0.1V RL=1MΩ VCC=1.8±0.15V VCC=2.5±0.2V VCC=3.3±0.3V VCC=0.8V VCC=1.2±0.1V CL=10pF VCC=1.5±0.1V RL=1MΩ VCC=1.8±0.15V VCC=2.5±0.2V VCC=3.3±0.3V VCC=0.8V VCC=1.2±0.1V CL=15pF VCC=1.5±0.1V RL=1MΩ VCC=1.8±0.15V VCC=2.5±0.2V VCC=3.3±0.3V VCC=0.8V VCC=1.2±0.1V CL=30pF VCC=1.5±0.1V RL=1MΩ VCC=1.8±0.15V VCC=2.5±0.2V VCC=3.3±0.3V MIN 3.3 2.5 2.2 1.7 1.4 3.9 3 2.6 2.1 1.8 4.7 3.7 3.2 2.5 2.2 6.8 5.3 4.6 3.6 3.2 TYP 15.6 5.9 4.2 3.4 2.5 2.1 17.7 6.9 5 4 3 2.5 19.5 7.8 5.6 4.6 3.5 2.9 25.4 10.4 7.6 6.3 4.8 4 MAX 10.8 7 5.9 4 3.2 12.2 8.1 6.9 4.6 3.8 13 8.6 7.4 5.1 4.2 16 10.8 9.2 6.5 5.4 UNIT ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns OPERATING CHARACTERISTICS (f=10MHz, TA =25°C , unless otherwise specified) PARAMETER Power Dissipation Capacitance SYMBOL CPD TEST CONDITIONS VCC=0.8V VCC=1.2±0.1V VCC=1.5±0.1V VCC=1.8±0.15V VCC=2.5±0.2V VCC=3.3±0.3V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 3.9 3.9 3.9 3.9 3.9 4.1 MAX UNIT pF pF pF pF pF pF 4 of 5 QW-R126-026.A U74AUP1G04 CMOS IC TEST CIRCUIT AND WAVEFORMS VCC 0.8V 1.2V±0.1V 1.5V±0.1V 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V VIN VCC VCC VCC VCC VCC VCC t R / tF ≤3ns ≤3ns ≤3ns ≤3ns ≤3ns ≤3ns VM VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 CL 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF 5,10,15,30pF RL 1MΩ 1MΩ 1MΩ 1MΩ 1MΩ 1MΩ Notes: 1. CL includes probe and jig capacitance. 2. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO = 50Ω. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R126-026.A