UNISONIC TECHNOLOGIES CO., LTD U74LVC1G04 CMOS IC SINGLE INVERTER GATE DESCRIPTION The UTC U74LVC1G04 is a single inverter gate, it provides the function Y = A . This device has power-down protective circuit, preventing device destruction when it is powered down. FEATURES * * * * * Operation voltage range: 1.65~5.5V Low power current: ICC=10μA(Max) 24mA output drive (VCC=3.3V) High noise immunity Power down protection ORDERING INFORMATION Ordering Number U74LVC1G04G-AE5-R U74LVC1G04G-AF5-R U74LVC1G04G-AL5-R Package SOT-23-5 SOT-25 SOT-353 Packing Tape Reel Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-181.E U74LVC1G04 PIN CONFIGURATION FUNCTION TABLE (each gate) INPUT A H L CMOS IC OUTPUT Y L H LOGIC DIAGRAM (positive logic) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-181.E U74LVC1G04 CMOS IC ABSOLUTE MAXIMUM RATINGS (unless otherwise specified)(Note 2) PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5~6.5 V Input Voltage VIN -0.5~6.5 V Output Voltage(Active Mode) VOUT -0.5~VCC+0.5 V Output Voltage(Power-Down Mode) VOUT -0.5~6.5 V Input Clamp Current(ViN<0) IIK -50 mA Output Clamp Current(VOUT<0) IOK -50 mA Output Current IOUT ±50 mA VCC or GND Current ICC ±100 mA Storage Temperature TSTG -65 ~ +150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL Supply Voltage VCC Input Voltage Output Voltage VIN VOUT Input Transition Rise or Fall Rate Operating Temperature tR, tF CONDITIONS Operating Data retention only MIN 1.65 1.5 0 0 TYP VCC =1.8V±0.15V,2.5V±0.2V VCC =3.3V±0.3V VCC =5V±0.5V TA -40 MAX 5.5 UNIT 5.5 VCC 20 10 5 85 V V ns/V ns/V ns/V ℃ MAX UNIT V STATIC CHARACTERISTICS PARAMETER Input Voltage High-Level SYMBOL VIH Input Voltage Low-Level VIL Output Voltage High-Level VOH Output Voltage Low-Level Input Leakage Current VOL II(LEAK) TEST CONDITIONS MIN VCC= 1.65V~1.95V 0.65×VCC VCC= 2.3V~2.7V 1.7 VCC= 2.7V~3.6V 2 VCC= 4.5V~5.5V 0.7×VCC VCC= 1.65V~1.95V VCC= 2.3V~2.7V VCC= 2.7V~3.6V VCC= 4.5V~5.5V VCC= 1.65V~5.5V, IOH=-100μA VCC-0.1 VCC= 1.65V, IOH=-4mA 1.2 VCC= 2.3V, IOH=-8mA 1.9 VCC= 3V, IOH=-16mA 2.4 VCC= 3V, IOH=-24mA 2.3 VCC= 4.5V, IOH=-32mA 3.8 VCC= 1.65V~5.5V, IOL=100μA VCC= 1.65V, IOL=4mA VCC= 2.3V, IOL=8mA VCC= 3V, IOL=16mA VCC= 3V, IOL=24mA VCC= 4.5V, IOL=32mA VCC= 0~5.5V, VIN=5.5V or GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TYP V 0.35×VCC 0.7 0.8 0.3×VCC V V 0.1 0.45 0.3 0.4 0.55 0.55 ±5 V μA 3 of 5 QW-R502-181.E U74LVC1G04 STATIC CHARACTERISTICS(Cont.) PARAMETER Power OFF Leakage Current Quiescent Supply Current Additional Quiescent Supply Current Input Capacitance SYMBOL TEST CONDITIONS IOFF VCC= 0V, VIN or VOUT =5.5V VCC= 1.65V~5.5V, VIN=5.5 or GND, IQ IOUT=0 VCC= 3V~5.5V, One input at VCC IQ 0.6V, other inputs at VCC or GND CIN VCC= 3.3V, VIN=VCC or GND MIN TYP MAX ±10 UNIT μA 10 μA 500 μA 3.5 pF DYNAMIC CHARACTERISTICS PARAMETER Propagation Delay From Input (A or B) to Output (Y) CMOS IC SYMBOL tPLH/tPHL TEST CONDITIONS VCC= 1.8V±0.15V, CL=15 pF VCC= 2.5V±0.2V, CL=15 pF VCC= 3.3V±0.3V, CL=15 pF VCC= 5V±0.5V, CL=15 pF VCC= 1.8V±0.15V, CL=30 or 50 pF VCC= 2.5V±0.2V, CL=30 or 50 pF VCC= 3.3V±0.3V, CL=30 or 50 pF VCC= 5V±0.5V, CL=30 or 50 pF MIN 2 1 0.7 0.7 3 1.4 1 1 TYP MAX 6.4 4.2 3.3 3.1 7.5 5.2 4.2 3.7 UNIT ns ns ns ns ns ns ns ns MIN TYP 16 18 18 20 MAX UNIT pF pF pF pF OPERATING CHARACTERISTICS PARAMETER Power Dissipation Capacitance SYMBOL CPD TEST CONDITIONS VCC=1.8V, f=10MHz VCC=2.5V, f=10MHz VCC=3.3V, f=10MHz VCC=5V, f=10MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-181.E U74LVC1G04 CMOS IC TEST CIRCUIT AND WAVEFORMS Note: CL includes probe and jig capacitance. VCC 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V 5V±0.5V VIN VCC VCC 3V VCC VCC VCC 3V VCC tR, tF ≤2ns ≤2ns ≤2.5ns ≤2.5ns ≤2ns ≤2ns ≤2.5ns ≤2.5ns VM VCC/2 VCC/2 1.5V VCC/2 VCC/2 VCC/2 1.5V VCC/2 VLOAD 2×VCC 2×VCC 6V 2×VCC 2×VCC 2×VCC 6V 2×VCC CL 15pF 15pF 15pF 15pF 30pF 30pF 50pF 50pF RL 1MΩ 1MΩ 1MΩ 1MΩ 1kΩ 500Ω 500Ω 500Ω V△ 0.15V 0.15V 0.3V 0.3V 0.15V 0.15V 0.3V 0.3V UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-181.E