PR-59, TC-XX-PR-59 Temperature Controller Innovative Technology for a Connected World PR-59 SERIES TEMPERATURE CONTROLLER The PR-59 temperature controller is designed for reversible (cooling/heating) control of thermoelectric assemblies requiring precise temperature control accuracy. The controller not only regulates the temperature, but also features two programmable fan outputs and an alarm output relay. The controller can be used as a stand-alone unit interface with RS-232 to read and control parameters and settings in real-time. An easy-touse PC software is included for programming and visual review of output parameters. Custom configurations can be accommodated, however MOQ applies. FEATURES • Operation in Cooling and Heating Modes • Regulation mode is user selectable & configurable (PID, ON/OFF, POWER) • Input power range can accommodate 11-30 VDC • Programmable set point (via pc, or potentiometer) • Outputs are available for fans, thermoelectric module, NTC thermistors or PT1000 sensors, alarm and LEDs • RS-232 Communication • Graphical User Interface that runs on Windows (does not run on Windows 7) BENEFITS • Real-time control of regulator parameters and temperature readings via RS232 interface • Stand alone operation • Control temperature, from –20°C to +100°C (-4 to +212°F) with the standard NTC sensor Other temperature range possible with other (NTC, PT1000) sensors • Configurable alarms • Temperature resolution of max 0.05°C • Use NTC or PT1000 sensors • Pulse width modulation of output: (Base Frequency of 10 kHz) • Control Stability of ±0.05°C (-20°C to +50°C) • Two alarm temperature sensor inputs with adjustable alarm set points • Alarm relay output, normally closed (will open on alarm); 1 A @ 24 VDC/120 VAC • Adjustable Fan Speed MARKETS • Medical diagnostics • Analytical instrumentation • Photonics laser systems • Electronic enclosure cooling • Chillers (liquid cooling) global solutions: local support Americas: +1.888.246.9050 Europe: +46.31.704.67.57 Asia: +86.755.2714.1166 [email protected] www.lairdtech.com/thermal TM PR-59, TC-XX-PR-59 Temperature Controller Innovative Technology for a Connected World Specifications Power Voltage Current Power User Interface 10 to 30 VDC 15 A (30 A with additional cooling) Up to 900 W (with additional cooling) Graphical User Interface PC program External Potentiometer (optional) Sensors Temp 1 Sensor Temp 2 Sensor Temp 3 Sensor Temp 4 Sensor Outputs Thermoelectric Module Fan 1 Fan 2 Alarm Relay LED Alarms Low Voltage High Voltage Thermoelectric Current Over Under Fans 1 & 2 Current Over Under Temp Sensors 1 Over Under Temp Sensors 2,3,4 Over Under NTC or PT1000 NTC NTC NTC (onboard) PWM, 0-Supply Voltage @ <=15 A (30 A with additional cooling) Linearly Regulated: 0-Supply Voltage @ 2 A Linearly Regulated: 0-Supply Voltage @ 2 A 1 A @ 24 VDC/120 VAC (will open on alarm) Regulator Voltages, Regulator Activity, Alarm, Relay Status If voltage is lower than programmed minimum level the outputs are shut down, the Alarm LED is turned on and the Alarm Relay is opened If voltage is higher than programmed maximum level the outputs are shut down, the Alarm LED is turned on and the Alarm Relay is opened If the Current is higher than the programmed maximum level the outputs are shut down, the Alarm LED is turned on and the Alarm Relay is opened If the Current is lower than the programmed minimum level the outputs are shut down, the Alarm LED is turned on and the Alarm Relay is opened If the Current is higher than the programmed maximum level the outputs are shut down, the Alarm LED is turned on and the Alarm Relay is opened If the Current is lower than the programmed minimum level the outputs are shut down, the Alarm LED is turned on and the Alarm Relay is opened If the temperature is higher than the programmed maximum level turn on alarm LED If the temperature is lower than the programmed minimum level turn on the alarm LED If the temperature is higher than the programmed maximum level the outputs are shut down, the Alarm LED is turned on and the Alarm Relay is opened If the temperature is lower than the programmed minimum level the outputs are shut down, the Alarm LED is turned on and the Alarm Relay is opened PR-59, TC-XX-PR-59 Temperature Controller Innovative Technology for a Connected World ISOMETRIC DRAWINGS INPUT/OUTPUT DESCRIPTION Notes: 1. NTC-1 thermistor included. 2. Mounting hardware is not included. Clearance holes available to accommodate M4 machine hardware or standoffs. 3. Mating connectors are not included. For input power connections (SV21,SV31,SV33, SV22) use 0.250” fast-on style terminal. For temperature sensors, external potentiometer and alarm relay use Molex KK 2695, 6471 or 7880 Series connectors. Au plating is recommended on mating pin terminals. THR-DS-TC-XX-PR-59 1012 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non-infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2011 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.