D-sub Connector Assembly Hoods XM2S D-Sub Connector Assembly Hoods That Are Ideal for Office Equipment Interfaces ■ Metallized plastic Hood provides excellent noise protection. ■ Connectors are available with cables connected horizontally (9-pin and 25-pin models only) to enable using the space behind the Connectors more effectively. RoHS Compliant ■ Terminology z Metallization Metallization means make plating processing on the plastic hood. z ESD Abbreviation of ElectroStatic Discharge ■ Hoods Model XM2S-@@1@ XM2S-@@2@ Appearance Hoods Reference page 3 4 ■ Characteristics Ambient operating temperature −25 to 85°C (with no condensation or icing) 1 ■ Features 25-contact Hoods Straight Connecting Cable (existing product) XM2S-251@ Right-angle Connecting Cable XM2S-252@ Available space Space-saving design requires an insertion /removal area only about 10 mm wide. Wide applicability with cable diameters ranging from 9 to 11 dia. Deep recess simplifies and protects labelling. 9-contact Hoods Available space Straight Connecting Cable (existing product) XM2S-091@ Right-angle Connecting Cable XM2S-092@ Space-saving design requires an insertion/ removal area only about 8 mm wide. Jackscrews secure Connectors so no screwdriver required. 41 mm 31 mm Deep recess simplifies and protects labelling. ■ Materials and Finish Housing ABS nickel plated Cable clamp Steel/nickel plated Lock screw Brass/nickel plated 2 D-sub Connector Assembly Hoods XM2S XM2S Hood Covers ■ Dimensions (The cable bushing, cable clamp, shielded tape and assorted screws are supplied.) XM2S-@@11 (M2.6 × 0.45 metric screws ) XM2S-@@12 (M3 × 0.5 metric screws ) XM2S-@@13 (#4-40 UNC inch screws) (unit: mm) Max. applicable cable diameter: F dia. Dot (screw head) Lock screw M2.6 × 0.45 M3 × 0.5 #4-40 UNC Dimensions No. of contacts Dot shape (Screw head) No dot 1 dot 2 dots A B C D E F 9 32.2 24.99 18.2 13 24 9 15 40.5 33.32 26.5 19 30 10 25 54.0 47.04 40 29 38 11 37 70.5 63.50 57 42 50 13 ■ Ordering Information Lock screw Applicable Anchors No. of contacts Anchor 1 Anchor 2 Anchor 3 9 15 25 37 M2.6 × 0.45 metric screws (No dot) XM2Z-0001 XM2Z-0011 XM2Z-0021 XM2S-0911 XM2S-1511 XM2S-2511 XM2S-3711 M3 × 0.5 metric screws (1 dot) XM2Z-0002 XM2Z-0012 XM2Z-0022 XM2S-0912 XM2S-1512 XM2S-2512 XM2S-3712 #4-40 UNC inch screws (2 dots) XM2Z-0003 XM2Z-0013 XM2Z-0023 XM2S-0913 XM2S-1513 XM2S-2513 XM2S-3713 Note: Lock screws are attached to the Hood. Select D-sub Connectors with Anchors or Grounding Fixtures that fit the lock screw of the Hood. ■ Accessories (Sold Separately) Anchor 5 (For Jackscrews and XM2S-@@1-@) XM2Z-0071 (M2.6 × 0.45 metric screws) XM2Z-0072 (M3 × 0.5 metric screws ) XM2Z-0073 (#4-40 UNC inch screws) Slot Dimensions Model 2.35 dia. Screw A A slot XM2Z-0071 M2.6 × 0.45 None XM2Z-0072 M3 × 0.5 1 XM2Z-0073 #4-40 UNC 2 slot shape 4 dia. Materials and Finish Brass/nickel plated Note: 1. Replace the lock screw that comes with the XM2S with Anchor 5. 2. Anchor 5 cannot be used with XM2S models that have cables connected horizontally. D-sub Connector Assembly Hoods XM2S 3 ■ Dimensions (unit: mm) Max. applicable diameter: 11 dia. (See note.) 25-contact D-sub Connector Assembly Hood with Right-angle Connecting Cable XM2S-2521 (M2.6 × 0.45 metric screws) XM2S-2522 (M3 × 0.5 metric screws) XM2S-2523 (#4-40 UNC inch screws) 15 XM2S-25 5 dia. 23 41 Note: The cable bushing, cable clamp, shielded tape and assorted screws are supplied. 39 6 Slot 40 47.04 54 Note: Lock screw M2.6 × 0.45 M3 × 0.5 #4-40 UNC The maximum applicable cable diameter is 9 dia if the cable clamp supplied is mounted facing the rear. Do not use a cable bushing in this case. 9-contact D-sub Connector Assembly Hood with Right-angle Connecting Cable XM2S-0921 (M2.6 × 0.45 metric screws) XM2S-0922 (M3 × 0.5 metric screws) XM2S-0923 (#4-40 UNC inch screws) 16 5 dia. 48 5.5 25.2 Slot Note: The cable bushing, cable clamp, shielded tape and assorted screws are supplied. 18.2 24.99 45 Max. applicable cable diameter: 9 dia. Lock screw M2.6 × 0.45 ■ Ordering Information Type Appearance D-sub Connector Assembly Hood with Right-angle Connecting Cable (nickel plated) No. of contacts 25 9 Model Lock screws (See note.) XM2S-2521 M2.6 × 0.45 metric screws (No slot) XM2S-2522 M3 × 0.5 metric screws (1 slot) XM2S-2523 #4-40 UNC inch screws (2 slots) XM2S-0921 M2.6 × 0.45 metric screws (No slot) XM2S-0922 M3 × 0.5 metric screws (1 slot) XM2S-0923 #4-40 UNC inch screws (2 slots) Note: Lock screws are attached to the Hood. Select D-sub Connectors with Anchors or Grounding Fixtures that fit the lock screw of the Hood. 4 D-sub Connector Assembly Hoods XM2S • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. G058-E1-02 1014(0412)(O)