Anchor 1 (Rectangular) XM2Z-0001 (M2.6 × 0.45 metric screws) XM2Z-0002 (M3.0 × 0.5 metric screws) XM2Z-0003 (#4-40 UNC inch screws) Materials and Finish Zinc die-cast/nickel plated Anchor 2 (Hexagonal) XM2Z-0011 (M2.6 × 0.45 metric screws) XM2Z-0012 (M3.0 × 0.5 metric screws) XM2Z-0013 (#4-40 UNC inch screws) 5 Female screw (Mates with lock screw) M3 × 0.5 Model XM2Z-0011 XM2Z-0012 Materials and Finish Iron/nickel plated XM2Z-0013 Part A Female screw (Mates with lock screw and mounting screw) M2.6 × 0.45 M3 × 0.5 #4-40 UNC Note: When using a Dust Cover, secure the holding ring at part A. Anchor 3 (Hexagonal) XM2Z-0021 (M2.6 × 0.45 metric screws) XM2Z-0022 (M3.0 × 0.5 metric screws) XM2Z-0023 (#4-40 UNC inch screws) 5 Female screw (mates with lock screw) M3 × 0.5 Model XM2Z-0021 XM2Z-0022 Model Materials and Finish Iron/nickel plated XM2Z-0001 Note: Anchor 3 is used for panel mounting Connectors. Applicable panel thickness is 0.6 to 1.3 mm. XM2Z-0002 XM2Z-0003 Note: 2 anchors are necessary per connector. 4 D-sub Connectors XM2Z-0023 XM2/XM3