SCALE™-2 Gate Driver Product Overview 2015 www.power.com Delivering Excellence in Gate Driver Design Power Integrations, Inc. is a technology and market leader in mid and high power IGBT drivers. Using highly integrated technology, the company’s IGBT drivers employ 85 % fewer components than other commonly-available solutions. Power Integrations has nearly 30 years' history of supporting demanding industries such as traction, power generation, power transmission and industrial automation with products that combine outstanding reliability, best-in-class performance and competitive pricing. InnOvATIvE SCALE™-2 AnD SCALE™-2+ TEChnOLOGy Power Integrations’ SCALE™-2 IGBT Gate Drivers use an ASIC chip set specifically-designed to reduce count, save space and increase product reliability and functionality. This approach enables designers to optimise dynamic switching performance and accuracy, delivering design flexibility and reducing time-to-market for applications with IGBT modules ranging from 150 A to 3600 A and 600 v to 6500 v. A recent technology development, SCALE™-2+, enables Soft Shut Down (SSD) to be implemented in the event of a short circuit without requiring additional components. This is particularly beneficial in applications with low stray-inductance where full Advanced Active Clamping (AAC) may not be required. IGBT GATE DrIvEr COrES DESIGn SUPPOrT PLUG-AnD-PLAy IGBT DrIvErS WOrLDWIDE LOCATIOnS Power Integrations’ IGBT Gate Driver Cores incorporate driver functions including galvanic isolation, protection functions, DC-DC converter etc on board, presenting designers with a complete yet extremely flexible system solution. IGBT driver cores are available with blocking voltage capabilities from 600 v – 6500 v and output power from 1 W to 20 W per channel. They are also suitable for driving wide bandgap devices based on emerging materials such as gallium nitride (Gan) and Silicon Carbide (SiC) at frequencies at up to 500 khz. Plug-and-play products are complete, ready-touse IGBT drivers that have been tightly-matched to a specific IGBT modul. Drivers are available to cover a large selection of high-power and highvoltage IGBT modules with reverse voltages from 600 v to 6500 v. All plug-and-play drivers are equipped with DC/DC converters; short-circuit protection; active clamping; supply monitoring; soft start and more. In addition to its IGBT product manufacturing centre of excellence in Switzerland, Power Integrations has a design centre based near Dortmund, Germany. The facility develops semi-custom gate-drive designs based on the company's driver cores and produces full-custom drivers using the company’s SCALE™-2 platform for large projects. The new facility is staffed with a team of specialist designers to address the needs of high power system developers with demanding technical requirements or short development schedules. Power Integrations is a global company with worldwide technical support and sales offices. Its IGBT gate driver products are used by leading companies in diverse applications including: industrial motor drives where efficiency is paramount; alternative energy (wind and solar) installations; variable speed motor control and power supply systems for electric and hybrid vehicles; mass transit such as trams, subway trains and buses; medical engineering; rF systems; inductive heating and welding; telecoms and research. www.power.com/igbt-driver SCALE™-2 GATE DrIvEr COrES POrTFOLIO COnTEnT SCALE™-2 GATE DrIvErS PrODUCT OvErvIEW 2015 SCALE™-2 rEFErEnCE DESIGnS ................ p. 4 SCALE™-2 GATE DrIvEr COrES 2SC0106T ......................................... p. 6 2SC0115T ......................................... p. 8 2SC0108T ......................................... p. 10 2SC0435T ......................................... p. 12 2SD300C17 ....................................... p. 14 2SC0650P ......................................... p. 16 1SC2060P ......................................... p. 18 2SC0535T ......................................... p. 20 2SC0635T ......................................... p. 22 1SC0450 ........................................... p. 24 SCALE™-2 PLUG-AnD-PLAy GATE DrIvEr SCALE™-2 PLUG-AnD-PLAy GATE DrIvEr POrTFOLIO 2SP0115T ......................................... p. 26 2SP0320 ........................................... p. 28 2SP0325 ........................................... p. 30 1SP0635 ........................................... p. 32 1SP0340 ........................................... p. 34 1SP0335 ........................................... p. 36 © 2015 | www.power.com/igbt-driver Page 3 SCALE™-2 reference Designs SCALE™-2 reference Designs for Easy Implementation of Gate Driver Units. PrODUCT DESCrIPTIOn To simplify the design-in process for development engineers using SCALE™-2 gate driver cores, Power Integrations offers a variety of reference designs optimized for particular applications and/or power module packages. Each reference design comes with a complete set of documentation, CAD and test data, significantly shortening gatedriver time. Our website is continually-updated with new designs covering applications such as Solar Power, Wind Power, UPS GPD and many more. Topologies supported include standard 2-level systems in single and parallel configuration as well as 3-level designs. rDhP-1411 KEy BEnEFITS Provides 'Blue Print' for generic and specific applications. Documentation includes actual test data. KEy FEATUrES - ready to use designs - Schematics, Gerber files and Bill-of-Materials available - Test Status available - 3D STEP files available - Designed in accordance with IEC standards - Based on standard SCALE™-2 gate driver cores On request, dedicated reference designs for IGBT and SiC MOSFET power modules are available, specifically to suit your applications and requirements. Page 4 © 2015 | www.power.com/igbt-driver rEFErEnCE DESIGn OvErvIEW Many SCALE™-2 reference Designs are available on our website, and we are continually-adding new ones to support your needs. Please contact us for your custom requirements. rDhP-1412 rDhP-1422 rDhP-1415 rDhP-1501 rDhP-1419 rDhP-1423 InFOrMATIOn rEFErEnCE DESIGnS GO TO WEB URL http://igbt-driver.power.com/design-support/reference-designs/ http://igbt-driver.power.com/design-support/technical-support-request/ © 2015 | www.power.com/igbt-driver Page 5 2SC0106T SCALE™-2 IGBT Gate Driver Core 2SC0106T – Dual-Channel Driver Core for 1200 v IGBTs – the Alternative to Opto-Coupler Driver Solutions for Inverter Designs requiring reinforced Insulation in the 37-110 kW Power range. PrODUCT DESCrIPTIOn new SCALE™-2+ technology enables Soft Shut Down (SSD) to be implemented in the event of a short circuit without requiring additional components. This is particularly beneficial in applications with low stray-inductance where full Advanced Active Clamping may not be necessary. The 2SC0106T dual-channel gate driver core is suitable for inverter designs in the 37 110 kW power range. It drives 600 v to 1200 v IGBTs with collector currents up to 450 A and switches at frequencies up to 50 khz. The 2SC0106T complies with all standards for safety and reinforced insulations. The new cost-effective SCALE™-2+ dual-driver core 2SC0106T combines unrivalled compactness with broad applicability. The driver was designed for universal applications requiring high reliability. The 2SC0106T drives all standard IGBT modules up to 450 A/1200 v or 600 A/650 v. It delivers all the necessary functionality required for an advanced dual-channel IGBT gate driver including an isolated DC/DC converter, soft start, short-circuit protection, Soft Shut Down (SSD) and supply-voltage monitoring. Page 6 Each of the two channels is electrically isolated from the primary side and the other channel. The 2SC0106T is the most compact driver core available for industrial applications, with a footprint of only 45.5 x 31 mm and a height of 13 mm, so even very space-restricted designs can be efficiently accommodated. Compared with conventional drivers, the use of the highly integrated SCALE™-2+ chipset results in the component count being cut by around 85 %. This leads to increased reliability and minimized cost. APPLICATIOnS - Industrial motor drives Premium Drives Uninterruptible power supplies (UPS) Solar inverters Electro/hybrid drive vehicles Switched mode power supplies (SMPS) Medical (MrT, CT, X-ray) Welding and Plasma cutters E321757 KEy BEnEFITS Soft Shut Down is implemented in the event of a short circuit without requiring extra components. Space- and cost-saving alternative to opto-coupler driver solutions. reinforced isolation for DC/DC and signals. KEy FEATUrES - Dual-channel driver core for up to 1200 v ±6 A gate current, +15 v/-8 v 1 W @ 8 degC per channel On-board power supply high reliability (reduced component count) Isolation technology meets international standards Direct paralleling capability Short-circuit protection, under-voltage lockout Delay time <100 ns, up to 50 khz, Jitter ± 3 ns Isolation coordination according to IEC 60664-1 -40…+85 degC (105 degC with derating) Lead-free Soft Shut Down (SSD) © 2015 | www.power.com/igbt-driver PrODUCT DESCrIPTIOn An output current of 6 A and 1 W drive power is available per channel, making the 2SC0106T an ideal driver platform for universal usage in small and medium power applications. The driver provides a gate voltage swing of +15 v/–8 v. The turn-on voltage is regulated to maintain a stable 15 v regardless of the output power level. Outstanding EMC performance enables safe and reliable operation even in harsh industrial environments. KEy DATA OvErvIEW 1) Parameter nominal supply voltage Supply current @ fIn=0 hz Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty cycle Creepage distance primary-secondary Creepage secondary-secondary Clearance distance primary-secondary Clearance distance secondary-secondary Dielectric test voltage Partial discharge extinction voltage dv/dt immunity, input to output Operating temperature Min -6 0 0 9 5.5 9 5.5 4000 1800 Typical 15 40 300 1 +15/-8 Max +6 50 100 50 +105 -40 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Unit v mA mA W v A khz % mm mm mm mm vAC vpeak kv/us degC BASIC SChEMATIC OF ThE 2SC0106T The 2SC0106T is a cost-effective driver core equipped with Power Integrations' latest SCALE™-2+ chipset. The chipset consists of two ASICs that provide the main functions required to implement intelligent gate drivers. Devices include all functionality necessary for an advanced dual-channel IGBT gate driver: isolated DC/DC converter, short-circuit protection, Soft Shut Down (SSD) and supplyvoltage monitoring. OrDErInG InFOrMATIOn 2SC0106T DUAL-ChAnnEL SCALE™-2+ GATE DrIvEr COrE *) 2SC0106T Soft Shut Down Type Designation 2SC0106T2A1-12 © 2015 | www.power.com/igbt-driver Description Standard version Temp degC -40…+85 SSD* yes kHz 50 Page 7 2SC0115T SCALE™-2 IGBT Gate Driver Core 2SC0115T – Dual-Channel Driver Core - the Alternative to Opto-Coupler Driver Solutions for Inverter Designs in the 90 - 500 kvA Power range. PrODUCT DESCrIPTIOn Dual-channel gate driver core is dedicated to inverter designs in the power range of 90-500 kvA. It drives 1200 v IGBTs with collector currents up to 2400 A and switches at frequencies up to 50 khz. The new cost-effective SCALE™-2 dual-driver core 2SC0115T combines unrivalled compactness with broad applicability. The driver was designed for universal applications requiring high reliability. The 2SC0115T drives all standard IGBT modules up to 2400 A /1200 v. The driver core targets applications such as general purpose drives, UPS, solar converters and medical applications. The driver supports switching up to 50 khz. It comprises all functionality for an advanced dual-channel IGBT gate driver including an reinforced isolated DC/DC converter, shortcircuit protection, Soft Shut Down (SSD) or Advanced Active Clamping (AAC) and supply-voltage monitoring. The 2SC0115T is the most compact driver core available for industrial applications, with a footprint of only 53.2 mm x 31 mm and an insertion height of 13 mm. It allows even the most restricted insertion spaces to be efficiently used. Compared with conventional drivers, the highly integrated SCALE™-2 Page 8 chipset allows about 85 % of components to be dispensed with. This advantage is impressively reflected in increased reliability at simultaneously minimized cost. APPLICATIOnS - Industrial motor drives Industrial motor drives Premium Drives Uninterruptible power supplies (UPS) Solar converters Electro/hybrid drive vehicles Switched mode power supplies (SMPS) Medical (MrT, CT, X-ray) Welding and Plasma cutters KEy BEnEFITS reinforce Isolation. Flexible use with Soft Shut Down (SSD) or Advanced Active Clamping (AAC). Optimized for 1200 v IGBT Modules KEy FEATUrES - - Dual-channel driver core for up to 1200 v Driver core for modules up to vces <= 1200 v ±15a peak output gate current +15 v/-6 v gate output current 1 W @ 85 degC output power per channel or 1.2 W @ = 70 degC On-board power supply high reliability (reduced component count) First-class isolation technology Direct paralleling capability Short-circuit protection, under-voltage lockout Delay time <100 ns, up to 50 khz reinforced insulation acc. to vde/en and IeC UL recognized Safe Torque off (STO) prepared Soft Shut Down (SSD) or Advanced Active Clamping (AAC) © 2015 | www.power.com/igbt-driver PrODUCT DESCrIPTIOn The 2SC0115T combines a complete two-channel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection as well as supply voltage monitoring. Each of the two output channels is electrically isolated from the primary side and the other secondary channel. KEy DATA OvErvIEW An output current of ±15 A and 1.2 W drive power is available per channel, making the 2SC0115T an ideal driver platform for universal usage in small and medium power applications. The driver provides a gate voltage swing of +15 v/–6 v. The turn-on voltage is regulated to maintain a stable 15 v regardless of the output power level. Its outstanding EMC allows safe and reliable operation in even hard industrial applications. 1) Parameter nominal supply voltage Supply current @ fIn=0 hz Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty cycle Creepage distance primary-secondary Creepage secondary-secondary Clearance distance primary-secondary Clearance distance secondary-secondary Dielectric test voltage Partial discharge extinction voltage dv/dt immunity, input to output Operating temperature Min -15 0 0 9 5.5 9 5.5 2500 1800 -40 Typical 15 TBD TBD 1 +15/-6 50 Max 1.2 +15 40 100 +105 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Unit v mA mA W v A khz % mm mm mm mm vAC vpeak kv/us degC BASIC SChEMATIC OF ThE 2SC0115T The 2SC0115T is a cost-effective driver core equipped with Power Integrations’ latest SCALE™-2 chipset. The SCALE™-2 chipset consists of two application-specific integrated circuits (ASICs) that cover the main range of functions needed to design intelligent gate drivers. It comprises all functionality for an advanced dual-channel IGBT gate driver including an isolated DC/DC converter, short-circuit protection, Soft Shut Down (SSD) and supplyvoltage monitoring. OrDErInG InFOrMATIOn 2SCO106T DUAL-ChAnnEL SCALE™-2 GATE DrIvEr COrE 2SC0115T Type Designation 2SC0115T2A0-12 © 2015 | www.power.com/igbt-driver Description -40…105 degC, lead free, SSD, AAC Pin length 3.00 mm Availability 06.2015 Page 9 2SC0108T SCALE™-2 IGBT Gate Driver Core 2SC0108T Dual-Channel Ultra-Compact Universal SCALE™-2 Gate Driver Core. new Types with SCALE™-2+ Chipset. PrODUCT DESCrIPTIOn The SCALE™-2 dual-driver core 2SC0108T combines unrivalled compactness with broad applicability and low cost. The driver was designed for universal applications requiring high reliability. The 2SC0108T drives all standard IGBT modules up to 600 A/1200 v or 450 A/1700 v. Its embedded paralleling capability allows easy inverter design covering higher power ratings. Multi-level topologies are also supported. The 2SC0108T is the most compact driver core available for industrial applications, with a footprint of only 45 mm x 34.3 mm and an insertion height of 16 mm. It allows even the most restricted insertion spaces to be efficiently used. Compared with conventional drivers, the highly integrated SCALE™-2 chipset allows about 85 % of components to be dispensed with. This advantage is impressively reflected in increased reliability at simultaneously minimized cost. The 2SC0108T combines a complete twochannel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection as well as supply voltage monitoring. Each of the two output channels is electrically isolated from the primary side and the other Page 10 secondary channel. An output current of 8 A and 1 W drive power is available per channel, making the 2SC0108T an ideal driver platform for universal use in small and medium power applications. The driver provides a gate voltage swing of +15 v/–8 v. The turn-on voltage is regulated to maintain a stable 15 v regardless of the output power level. Its outstanding EMC allows safe and reliable operation even in tough industrial applications. APPLICATIOnS - General purpose drives - Uninterruptible power supplies (UPS) - Solar and wind power converters - Auxiliary converters for traction - Electric/hybrid drive vehicles - Driving parallel-connected IGBTs - Switched-mode power supplies (SMPS) - Medical (MrT, CT, X-ray) - Laser technology E321757 KEy BEnEFIT Unrivalled compactness with broad applicability and high reliability - 85 % less components compared to conventional drivers. KEy FEATUrES - Ultra-compact dual-channel driver - Blocking voltages up to 1700 v - Switching frequency up to 50 khz - very short delay time of <100 ns - Small jitter of ±2 ns - Gate current ±8 A - +15 v/-8 v gate driving - regulated gate-emitter voltage - Interface for 3.3 v…15 v logic level - Direct and half-bridge modes - Embedded paralleling capability - 2-level and multilevel topologies - IGBT short-circuit protection - Isolated DC/DC converter - 2 x 1 W output power - Supply under-voltage lockout - Safe isolation to En50178 - UL recognized: under UL 508C nMMS2/8 and under UL 60950-1 nWGQ2/8 - Superior EMC - reliable, long service life - Footprint: 45 mm x 34.3 mm © 2015 | www.power.com/igbt-driver KEy DATA OvErvIEW 1) Parameter nominal supply voltage Supply current @ fIn=0 hz Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty cycle Turn-on delay Turn-off delay Output rise time Output fall time Creepage distance primary-secondary Creepage secondary-secondary Clearance distance primary-secondary Clearance distance secondary-secondary Dielectric test voltage Partial discharge extinction voltage dv/dt immunity, input to output Min -8 0 0 12.9 8.5 12.9 6.5 5000 1768 Typical 15 31 240 1 +15/-8 +8 50 100 90 75 17 15 75 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. BASIC SChEMATIC OF ThE 2SC0108T 2SC0108T Soft Shut Down Type Designation 2SC0108T2A0-17 2SC0108T2B0-17 2SC0108T2C0-17 2SC0108T2D0-12 / 2SC0108T2D0-07 2SC0108T2E0-17 2SC0108T2F0-17 2SC0108T2h0-17 (under development) 2SC0108T2F1-17 (under development) 2SC0108T2G0-17 (under development) © 2015 | www.power.com/igbt-driver Unit v mA mA W v A khz % ns ns ns ns mm mm mm mm vAC vpeak kv/us BASIC SChEMATIC OF ThE 2SC0108T2D0-XX OrDErInG InFOrMATIOn 2SC0108T DUAL-ChAnnEL SCALE™-2 GATE DrIvEr COrE *) Max Increased EMI capability no no no yes no no yes yes yes Temp degC -20…85 -40…85 -40…85 -40…85 -40…85 -40…85 -40…85 -40…85 -40…85 SSD* no no no no no no yes yes yes Lead free no no no no yes yes yes yes yes Pin length 2.54 mm 2.54 mm 5.84 mm 2.54 mm 2.54 mm 5.84 mm 2.54 mm 5.84 mm 3.10 mm Page 11 2SC0435T SCALE™-2 IGBT Gate Driver Core 2SC0435T Dual-Channel, Low-Cost high-Power SCALE™-2 Driver Core. new with SCALE™-2+ Chipset. PrODUCT DESCrIPTIOn The new high-power low-cost SCALE™-2 dual driver core 2SC0435T combines unrivalled compactness with broad applicability. It is made for universal applications requiring high reliability and performance. The 2SC0435T drives all common high-power IGBT modules up to 1700 v. Its embedded paralleling capability allows easy inverter design covering higher power ratings. Multilevel topologies are also supported. The 2SC0435T is the most compact driver core in its power range, featuring a footprint of only 57.2 mm x 51.6 mm and an insertion height of 20 mm. It allows even the most restricted spaces to be efficiently used. Compared with conventional drivers, the highly integrated SCALE™-2 chipset allows about 85 % of components to be dispensed with. This advantage is impressively results in significantly-increased reliability and minimized cost. The 2SC0435T combines a complete twochannel driver core with all components required for driving, such as short-circuit protection, advanced active clamping, an isolated DC/DC converter as well as supply voltage monitoring. Each of the two output channels is electrically isolated from the Page 12 primary side and the other secondary channel. APPLICATIOnS - Wind power and photovoltaic - Industrial drives - Traction applications - Electric/hybrid drive commercial vehicles - Uninterruptible power supplies (UPS) - Driving large parallel-connected IGBTs - high gate-current driving applications - Medical (MrT, CT, X-ray) - Laser technology E321757 KEy BEnEFIT The 2SC0435T drives all common high-power IGBT modules up to 1700 v. It offers broad applicability thanks to its compactness and cost effectiveness, especially for solar/wind applications. KEy FEATUrES - high-power dual-channel driver - Blocking voltages up to 1700 v - Switching frequency up to 100 khz - very short delay time of <100 ns - Small jitter of ±3 ns - Gate current ±35 A - regulated gate-emitter voltage - Interface for 3.3 v…15 v logic level - Direct and half-bridge modes - Embedded paralleling capability - 2-level and multilevel topologies - IGBT short-circuit protection - Advanced active clamping - Isolated DC/DC converter - 2 x 4 W output power - Supply under-voltage lockout - Safe isolation to En50178 - UL recognized: under UL 508C nMMS2/8 and under UL 60950-1 nWGQ2/8 - Superior EMC - reliable, long service life - Footprint: 57.2 mm x 51.6 mm - Soft Shut Down (SSD) © 2015 | www.power.com/igbt-driver KEy DATA OvErvIEW 1) Parameter nominal supply voltage Supply current @ fIn=0 hz Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty cycle Turn-on delay Turn-off delay Output rise time Output fall time Creepage distance primary-secondary Creepage secondary-secondary Clearance distance primary-secondary Clearance distance secondary-secondary Dielectric test voltage Partial discharge extinction voltage dv/dt immunity, input to output Operating temperature Min -35 0 0 Typical 15 58 700 4 +15/-10 15.7 12 15.7 7.3 5000 1768 -40 85 70 20 20 75 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Max 35 100 100 +85 Unit v mA mA W v A khz % ns ns ns ns mm mm mm mm vAC vpeak kv/us degC BASIC SChEMATIC OF ThE 2SC0435T The 2SC0435T targets medium-power, dual-channel IGBT and MOSFET applications. The driver supports switching up to 100 khz at best-in-class efficiency. The 2SC0435T comprises a complete dual-channel IGBT driver core, fully equipped with an isolated DC/DC converter, short-circuit protection, advanced active clamping and supply-voltage monitoring. The 2SC0435T is a driver core equipped with the SCALE™2 chipset, a set of application-specific integrated circuits (ASICs) that covers the main range of functions needed to design intelligent gate drivers. DrIvInG PArALLEL-COnnECTED IGBTS The driver allows direct parallel connection of any number of IGBT modules with individual drivers. This new pioneering concept for simple and reliable parallel connection makes it practical for the first time to set up converter series with discrete modules as well as parallel-connected IGBTs without any additional development effort. OrDErInG InFOrMATIOn 2SC0435T DUAL-ChAnnEL SCALE™-2 GATE DrIvEr COrE 2SC0435T *) Soft Shut Down Type Designation 2SC0435T2A0-17 2SC0435T2C0-17 2SC0435T2D0-17 2SC0435T2E0-17 2SC0435T2F0-17 2SC0435T2F1-17 (under development) 2SC0435T2G1-17 (new) 2SC0435T2h0-17 (under developmemnt) © 2015 | www.power.com/igbt-driver Increased EMI capability no no no no yes yes yes yes SSD* no no no no no yes yes yes Lead free no no yes yes no yes yes yes Pin length 2.54 mm 5.84 mm 2.54 mm 5.84 mm 5.84 mm 5.84 mm 3.10 mm 2.54 mm Page 13 2SD300C17 SCALE™-2 IGBT Gate Driver Core 2SD300C17 Second Source Dual-Channel Driver Core. Fully Pin and Function-Compatible. PrODUCT DESCrIPTIOn The 2SD300C17 SCALE™-2 dual-driver core is a second source solution and is fully pin and function-compatible. It targets high reliability applications. The use of Power Integrations highly integrated SCALE™-2 chipset uses 63 % fewer components than other market available solutions. This results in a significant improvement in reliability (both calculated MTBF and measured) and reduced costs. The 2SD300C17 combines a complete two-channel driver core with all components required for driving, such as an isolated DC/DC converter, shortcircuit protection, failure soft shut down, short pulse suppression as well as supply voltage monitoring. Each of the two output channels is electrically isolated from the primary side and the other secondary channel. APPLICATIOnS - Traction Solar Wind-power converters Medium-voltage converters/drives Motor drives IGBTs up to 1700 v KEy BEnEFITS Pin compatible product with drastically reduced component count. KEy FEATUrES - Dual-channel driver core Second source solution Blocking voltages up to 1700 v Switching frequency up to 60 khz Short pulse supression 400 ns Delay time <700 ns Gate current ±30 A Gate voltage ±15 v 15 v logic interface Direct and half-bridge modes IGBT short-circuit protection Failure soft shut down Isolated DC/DC converter 2 x 4 W output power Supply under-voltage lockout The driver provides a gate voltage swing of ±15 v. An output current of 30 A and 4 W drive power is available per channel. Excellent EMC performance with a dv/dt strength of more than 50 v/ns allows safe and reliable operation even in demanding industrial applications. Page 14 © 2015 | www.power.com/igbt-driver KEy DATA OvErvIEW Min Typical 15 65 21 4 ±15 -30 0 -40 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver BASIC SChEMATIC OF ThE 2SD300C17 VDD VDD VDC VDC GND VCC 30 60 100 85 Vdd iVce SO ref Channel A INB CA CB for IGD INN VA+ bridge mode Gate A Sense A VA+ VA+ VA- Vee COM A VA- VA- VA- INB LDI VB+ Fault Detection VB+ Vdd COM B DCDC2 iVce SO SOB GND Vss ref VB- TRPB INP TRNB INN GND GND RC A COM A Vss SOA SOB Vce A DCDC1 Mod SOA Protection GH AUXGL INA VDC Desaturation GL COM A half- E.A AUXGH INP INA Logic Unit v mA mA W v A khz % ns ns degC Fault Detection VA+ TRPA TRNA Max 630 490 Isolation Barrier 1) Parameter nominal supply voltage fIn Supply current @ fIn 0 hz Supply current @ fIn 60 hz Output power Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty cycle Turn-on delay Turn-off delay Operating temperature GND Channel B E.B Desaturation Protection Vce B RC B AUXGH IGD Gate B GH GL AUXGL Sense B VB+ VB+ COM B Vss Vee VB- VB- OrDErInG InFOrMATIOn 2SD300C17 SCALE™-2 GATE DrIvEr COrE 2SD300C17 Type Designation 2SD300C17A1 2SD300C17A2 © 2015 | www.power.com/igbt-driver Description Standard version Lead free version COM B VB- Lead free no yes Page 15 2SC0650P SCALE™-2 IGBT Gate Driver Planar Core 2SC0650P – Dual-Channel IGBT Gate Driver Core with Planar Transformers. highest Power Density for high-Power and highFrequency. 50 A Gate Current and 2 x 6 W Output Power. PrODUCT DESCrIPTIOn The 2SC0650P driver core combines high power density with broad applicability. The driver is designed for both high-power and high-frequency applications requiring maximum reliability. It is suitable for IGBTs with reverse voltages up to 1700 v and also SiC MOSFET. The highly integrated SCALE™-2 chipset reduces the component count by up to 85 % compared to conventional solutions, thus significantly increasing reliability and reducing costs. SCALE™-2 technology enables the driver core to operate at switching frequencies of up to 150 khz – at best-in-class efficiency. The 2SC0650P has a profile of only 6.5 mm and a footprint of 57 x 62 mm. It combines a complete two-channel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection, Advanced Active Clamping as well as supply voltage monitoring. Each of the two output channels is electrically-isolated from the primary side and the other secondary channel. Page 16 APPLICATIOnS - high gate-current driving applications high-frequency applications Switched-mode power supplies (SMPS) Wind power converters Induction heating Industrial drives Traction applications Electro/hybrid drive commercial vehicles KEy BEnEFITS Ultra-flat due to planar transformers and highest power density. Low transformer stray inductance. KEy FEATUrES - Ultra-low-profile solution Planar transformer isolation IGBT blocking voltages up to 1700 v Switching frequency up to 150 khz very short delay time of ≤80 ns Extremely small jitter of ≤±2 ns high gate current ±50 A Compatible to all logic families IGBT short-circuit protection Advanced Active Clamping 2 x 6 W output power Supply under-voltage lockout Safe isolation to En50178 UL compliant Superior EMC © 2015 | www.power.com/igbt-driver KEy DATA OvErvIEW 1) Parameter nominal supply voltage Supply current @ fIn=0 hz Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty cycle Turn-on delay Turn-off delay Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage Partial discharge extinction voltage dv/dt immunity, input to output Operating temperature Min -50 0 5000 1768 Maximum switching frequency depends on the IGBT gate charge. See Data sheet for actual value of specific driver. Typical 15 61 +15/-10 80 75 15 15 Max 1335 6.5 +50 150 100 5100 100 +85 -40 Unit v mA mA W v A khz % ns ns mm mm vAC vpeak kv/us degC BASIC SChEMATIC OF ThE 2SC0650P OrDErInG InFOrMATIOn 2SC0650P DUAL-ChAnnEL SCALE™-2 GATE DrIvEr PLAnAr COrE 2SC0650P Type Designation 2SC0650P2A0-17 2SC0650P2C0-17 © 2015 | www.power.com/igbt-driver Description Switching frequency up to 150 khz Switching frequency up to 150 khz Temp degC -40…85 -40…85 Lead free no no Pin length 2.54 mm 5.84 mm Page 17 1SC2060P SCALE™-2 IGBT Gate Driver Planar Core 1SC2060P – Single-Channel Gate Driver Core with 60 A Gate Current for Driving Large IGBT Modules in Parallel 20 W Output Power for high-Frequency Applications up to 500 khz. PrODUCT DESCrIPTIOn The 1SC2060P is designed for high-power and high-frequency applications using highpower IGBTs and SiC MOSFETs. The gate driver supports switching at up to 500 khz with best-in-class efficiency. The 1SC2060P effectively comprises a complete single-channel IGBT driver core, fully-equipped with an isolated DC/DC converter, short-circuit protection, Advanced Active Clamping, and supply-voltage monitoring. With its compact outline of 44 mm x 74 mm and a total height of just 7 mm, the 1SC2060P delivers high power density in an attractive form factor. The highly-integrated SCALE™-2 chipset reduces components being cut by around 85 %. This leads to increased reliability and minimized costs. Page 18 APPLICATIOnS - high-frequency applications high gate-current driving applications Switched-mode power supplies (SMPS) Driving parallel-connected large IGBTs Wind power converters Traction propulsion converters Industrial drives Induction heating KEy BEnEFITS Use of planar transformer technology leads to low transformer stray inductance, ultra-flat design and high power density. KEy FEATUrES - Ultra-low-profile solution Planar transformer isolation Switching frequency up to 500 khz IGBT blocking voltages up to 1700 v very short delay time of <80 ns Extremely small jitter of <±1 ns high gate current ±60 A Compatible to all logic families IGBT short-circuit protection Advanced Active Clamping Isolated DC/DC converter 20 W output power Supply under-voltage lockout Safe isolation to En50178 UL compliant Superior EMC © 2015 | www.power.com/igbt-driver KEy DATA OvErvIEW 1) Parameter nominal supply voltage Supply current @ fIn=0 hz Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty cycle Turn-on delay Turn-off delay Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage Partial discharge extinction voltage dv/dt immunity, input to output Operating temperature Min -60 0 15 15 5000 1768 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver Typical 15 48 +15/-10 75 70 15 5050 Max 2131 23 +60 500 100 5100 100 +85 -40 Unit v mA mA W v A khz % ns ns mm mm vAC vpeak kv/us degC BASIC SChEMATIC OF ThE 1SC2060P OrDErInG InFOrMATIOn 1SC2060P SInGLE-ChAnnEL SCALE™-2 GATE DrIvEr PLAnAr COrE 1SC02060P Type Designation 1SC02060P2A0-17 © 2015 | www.power.com/igbt-driver Description Switching frequency up to 500 khz Temp degC -40…85 Lead free no Pin length 5.84 mm Page 19 2SC0535T SCALE™-2 IGBT Gate Driver Core 2SC0535T-33 Dual-Channel IGBT Driver for 1.7 kv - 3.3 kv IGBTs. PrODUCT DESCrIPTIOn The driver is designed for industrial and traction applications requiring high reliability. The 2SC0535T drives all standard high-voltage IGBT modules up to 3300 v. Its embedded paralleling capability allows easy inverter design covering higher power ratings. Multi-level topologies with 1700 v IGBTs with higher requirements on the isolation can also be easily supported by 2SC0535T. The SCALE™-2 driver core 2SC0535T combines unrivalled compactness with broad applicability and cost efficiency. The 2SC0535T is the most compact driver core in its voltage and power range, featuring a footprint of only 76.5 mm x 59.2 mm and an insertion height of max. 26 mm. It allows even the most restricted insertion spaces to be efficiently used. Compared with conventional drivers, the highly integrated SCALE™2 chipset allows about 85 % of components to be dispensed with. This advantage is impressively reflected in increased reliability at simultaneously minimized cost. The 2SC0535T combines a complete dualchannel driver core with all necessary safety features, such as short-circuit protection, advanced active clamping, an isolated DC/DC converter as well as supply voltage monitoring. Each of the two output channels is Page 20 electrically isolated from the primary side and the other secondary channel. An output current of 35 A and 5 W drive power is available per channel, making the 2SC0535T an ideal driver platform for both high-power modules and parallel circuits. In dedicated IGBT mode, the driver provides a gate voltage swing of +15 v/–10 v. The turnon voltage is regulated to maintain stable 15 v regardless of the output power level. Moreover, its temperature range has been increased to -55…85 degC to cover applications requiring lower temperature capability. APPLICATIOnS - Traction - railroad power supplies - Light rail vehicles - hvDC - Flexible AC transmission systems (FACTS) - Medium-voltage converters - Wind-power converters - Industrial drives KEy BEnEFIT The 2SC0535T is the most compact driver core in its voltage and power range - a cost-effective and compact dual-channel solution for various 3.3 kv applications. KEy FEATUrES - IGBT blocking voltages up to 3300 v - 2-level and multilevel topologies - Embedded paralleling capability - Switching frequency up to 100 khz - very short delay time of <100 ns - Small jitter of ±2 ns - Gate current ±35 A - +15 v (regulated)/-10 v gate driving - Interface for 3.3 v…15 v logic level - Direct and half-bridge modes - IGBT short-circuit protection - Supply under-voltage lockout - Isolated DC/DC converter - 2 x 5 W output power - Operating temperature -55…85 degC - Safe isolation En50178 and En50124 - UL compliant - Superior EMC - reliable, long service life © 2015 | www.power.com/igbt-driver KEy DATA OvErvIEW 1) Parameter nominal supply voltage Supply current @ fIn 0 hz Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty cycle Turn-on delay Turn-off delay Output rise time Output fall time Creepage distance primary-secondary Creepage secondary-secondary Clearance distance primary-secondary Clearance distance secondary-secondary Dielectric test voltage Partial discharge extinction voltage dv/dt immunity, input to output Operating temperature Min -35 0 0 44 22 25 14 9100 4125 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. MEChAnICAL DIMEnSIOnS 2SC0535T The primary and secondary side pin grid is 2.54 mm (100 mil) with a pin cross section of 0.64 mm x 0.64 mm. Total outline dimensions of the board are 59.2 mm x 76.5 mm. The total height of the driver is max. 26 mm measured from the bottom of the pin bodies to the top of the populated PCB. MEChAnICAL DrAWInG OF 2SC0535T -40 Type Designation 2SC0535T2A1-33 © 2015 | www.power.com/igbt-driver Description Standard version 70 70 20 20 50 Max +35 100 100 +85 Unit v mA mA W v A khz % ns ns ns ns mm mm mm mm vAC vpeak kv/us degC DrIvInG PArALLEL-COnnECTED IGBTS The driver allows direct parallel connection of any number of IGBT modules with individual drivers. This new pioneering concept for simple and reliable parallel connection makes it practical for the first time to set up converter series with discrete modules as well as parallel-connected IGBTs without any additional development effort. BASIC SChEMATIC OF ThE 2SC0535T OrDErInG InFOrMATIOn 2SC0535T DUAL-ChAnnEL SCALE™-2 GATE DrIvEr COrE 2SC0535T Typical 15 87 900 5 +15/-10 Temp degC -40…85 Lead free yes Pin length 5.84 mm Page 21 2SC0635T SCALE™-2 IGBT Gate Driver Core 2SC0635T-45 Proven high-voltage IGBT Dual Gate Driver Core with Electrical Signal Interface. PrODUCT DESCrIPTIOn The 2SC0635T dual-channel SCALE™-2 driver core combines unrivalled compactness with broad applicability and cost efficiency. It is designed for industrial and traction applications requiring high reliability. The 2SC0635T drives all standard high-voltage IGBT modules up to 4500 v. The turn-on voltage is regulated to maintain a stable 15 v regardless of the output power level. Its outstanding EMC allows safe and reliable operation even in hard industrial applications. The driver is designed for universal applications requiring high reliability. Its embedded paralleling capability allows easy inverter design covering higher power ratings. Multi-level topologies involving 1700 v or 3300 v IGBTs with higher isolation requirements can also be easily supported by 2SC0635T2A0-45. - The 2SC0635T is the most compact driver core in its voltage and power range, featuring a footprint of only 75.5x 66.8 mm and an insertion height of maximum 26 mm. It allows even the most restricted insertion spaces to be efficiently used. APPLICATIOnS Traction hvDC STATCOM Medium-voltage converters/drives Wind-power converters KEy BEnEFITS 4.5 kv driver core with on board power supply and no fiber optics achieves lower system costs. KEy FEATUrES - Dual-channel driver core for up to 4500 v ±35 A gate current, +15 v/-10 v 6 W @ 85 degC per channel high reliability (reduced component count) Design flexibility 1700 v/3300 v 3-level converters Direct paralleling capability Advanced Active Clamping Short-circuit protection, under-voltage lockout Adjustable short-circuit turn-off delay (3-level converters) Delay time <100 ns, up to 100 khz Isolation coordination according to IEC Standards UL compliant Applications up to -55 degC Lead free An output current of 35 A and 6 W drive power is available per channel, making the 2SC0635T2A0-45 an ideal driver platform for universal use in medium and high-power applications. The driver provides a gate voltage swing of 15 v/-10 v. Page 22 © 2015 | www.power.com/igbt-driver KEy DATA OvErvIEW 1) Parameter nominal supply voltage Supply current @ fIn=0 hz Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty Cycle Turn-on delay Turn-off delay Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage Partial discharge extinction voltage dv/dt immunity, input to output Operating temperature Min -35 0 34 25 5400 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Typical 15 95 15/-10 95 80 Max 1484 9 35 100 100 10300 50 85 -40 Unit v mA mA W v A khz % ns ns mm mm vAC vpeak kv/us degC BASIC SChEMATIC OF ThE 2SC0635T The 2SC0635T2A0-45 combines a complete twochannel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection, Advanced Active Clamping as well as supply voltage monitoring. Each of the two output channels is electrically isolated from the primary side and from the other secondary channel. OrDErInG InFOrMATIOn 2SC0635T SCALE™-2 GATE DrIvEr COrE 2SC0635T Type Designation 2SC0635T2A0-45 © 2015 | www.power.com/igbt-driver Description For 4.5 kv IGBT modules, electrical interface Temp degC -40…85 Lead free yes Pin length 5.84 mm Page 23 1SC0450 SCALE™-2 IGBT Gate Driver Core 1SC0450v/1SC0450E high-voltage 4.5 kv and 6.5 kv Single-Channel Gate Driver with Integrated DC/DC Converter. PrODUCT DESCrIPTIOn robust and cost effective single-channel gate drive solution for 4.5 kv and 6.5 kv IGBT modules. The 1SC0450x2A0-xx features versatile fiber-optic links or electrical input. Thanks to its high output power capability, one single driver 1SC0450x2A0-xx can drive up to four parallel connected 4500 v or 6500 v IGBT modules and consequently provides easy inverter design covering higher power ratings. Multi-level topologies involving 3300 v or 4500 v IGBTs with higher isolation requirements can also be easily supported by 1SC0450x2A0-xx. The driver’s secondary side is electrically isolated from the primary side. The 1SC0450x2A0-45 meets the requirements of 4500 v IGBT applications while the 1SC0450x2A0-65 covers the requirements of 6500 v IGBT applications. An output current of 50 A and 6 W drive power is available, making the 1SC0450x2A0-xx an ideal driver platform for universal use in medium and high-power applications. The driver provides a gate voltage swing of 15 v /-10 v. The turn-on voltage is regulated to maintain a stable 15 v regardless of the output power level. Page 24 Its outstanding EMC allows safe and reliable operation even in hard industrial applications. APPLICATIOnS - Traction - hvDC - STATCOM - Medium-voltage converters/drives - Wind-power converters KEy BEnEFITS Compact and reliable 4.5 kv and 6.5 kv gate drive unit enables cost effective multi-level designs and supports series connection of IGBTs. Supports voltage source inverter (vSI, vvvF) and current source inverter (CSI). Flexible and innovative design with gate driver core functionalities. KEy FEATUrES - Single-channel driver core for up to 4.5 kv and 6.5 kv IGBTs - ±50 A gate current, +15 v/-10 v - 6 W @ 85 degC - high reliability (reduced component count) - Parallel connection of IGBT modules - Design flexibility - Advanced Active Clamping and Dynamic Advanced Active Clamping - Short-circuit protection, under-voltage lockout - Short delay time <100 ns - Power Supply Short-circuit protection - Gate boosting functionallity - Isolation according to IEC 60664-1 - UL compliant - Lead free - -40…+85 degC © 2015 | www.power.com/igbt-driver KEy DATA OvErvIEW 1) Parameter nominal supply voltage Supply current @ fIn=0 hz Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty Cycle Turn-on delay Turn-off delay Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage Partial discharge extinction voltage dv/dt immunity, input to output Operating temperature Min -50 0 45 25 5400/7800 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Typical 15 130 +15 v/-10 v 135 105 Max 880 8 50 10 100 10300 35 85 -40 Unit v mA mA W v A khz % ns ns mm mm vAC vpeak Kv/us degC BASIC SChEMATIC OF ThE 1SC0450v The 1SC0450v2A0-xx combines a complete singlechannel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection, Advanced Active Clamping as well as supply voltage monitoring. Enhanced features such as gate boosting or power supply short-circuit protection are also implemented and provide further driving benefits. BASIC SChEMATIC OF ThE 1SC0450E OrDErInG InFOrMATIOn 1SC0450 SCALE™-2 GATE DrIvEr COrE 1SC0450v Type Designation 1SC0450v2A0-45 1SC0450v2A0-65 1SC0450E2A0-45 1SC0450E2A0-65 © 2015 | www.power.com/igbt-driver Description hBFr-1522ETZ hBFr-2522ETZ no hBFr no hBFr Temp degC -40…85 -40…85 Lead free yes yes yes yes Pin length 5.84 mm 5.84 mm 5.84 mm 5.84 mm Page 25 2SP0115T SCALE™-2 Plug-and-Play IGBT Driver 2SP0115T Dual-Channel Gate Driver with Electrical Interface for 17 mm-Dual IGBT Modules. PrODUCT DESCrIPTIOn The 2SP0115T is a dual-channel driver with an electrical interface. The driver is based on Power Integrations SCALE™-2 chipset, a highly integrated technology for the reliable driving and safe operation of IGBTs. circuit protection, advanced active clamping and supply-voltage monitoring. Perfectly matched driver versions are available for all 17 mm dual IGBT modules. The plug-and-play capability of the driver allows immediate operation after mounting. The user needs invest no effort in designing or adjusting it to a specific application. Perfectly matched driver versions are available for all 17 mm dual IGBT modules. Users need only solder them onto the corresponding IGBT module. The plug-andplay capability of the driver allows immediate operation with no further development or matching effort. Shortest design cycles are achieved without compromising overall system efficiency in any way. 2SP0115T is the ultimate low-cost ultracompact driver platform for EconoDUAL™ IGBT modules. As a member of the Power Integrations' plug-and-play driver family, it satisfies the requirements for optimized electrical performance and noise immunity. The embedded paralleling capability allows easy inverter design covering higher power ratings. Specifically adapted drivers are available for all module types. The DIC20 electrical interface is very simple and easy to use. The highly integrated SCALE™-2 chipset reduces the component count by 80 % compared to conventional solutions, thus significantly increasing reliability and reducing costs. Thanks to SCALE™-2 technology, the 2SP0115T family comprises complete and extremely compact two-channel IGBT drivers equipped with DC/DC converters, shortPage 26 APPLICATIOnS - Wind-power converters - Industrial drives - railways auxiliary systems - Induction heating - Elevators - UPS and SMPS - Medical (MrT, CT, X-ray) - Laser technology KEy BEnEFIT Compact driver solution for 17 mm dual IGBT modules with an electrical interface for 2-level, 3-level and multilevel converter topologies with paralleling capability. KEy FEATUrES - very short delay time of <100 ns - Small jitter of ±4 ns - +15 v (regulated)/-8 v gate driving - Separate gate current paths (on/off) - Suitable for IGBTs up to 1700 v - Interface for 3.3 v…15 v logic level - Direct and half-bridge modes - Embedded paralleling capability - 2-level and multilevel topologies - IGBT short-circuit protection - Advanced active clamping - Isolated DC/DC converter - 2 x 1 W output power - Supply under-voltage lockout - Safe isolation to En50178 - UL compliant - Superior EMC - reliable, long service life © 2015 | www.power.com/igbt-driver DrIvInG PArALLEL-COnnECTED IGBTS KEy DATA OvErvIEW The driver allows direct parallel connection of any number of 17 mm modules with individual drivers. This new pioneering concept for simple and reliable parallel connection makes it practical for the first time to set up converter series with discrete modules as well as parallel-connected IGBTs without any additional development effort. ELECTrICAL InTErFACE DIC20 The 2SP0115T driver series is equipped with DIC20 electrical interface, fully compatible to PrimePACK™ driver series 2SP0320T. The DIC20 electrical interface is very simple and easy to use. The driver has the following terminals: - Power supply and GnD terminals - 2x drive signal inputs - 2x status outputs (failure returns) - 1x mode selection (half-bridge mode/direct mode) - 1x input to set the blocking time All inputs are ESD-protected and all digital inputs have Schmitt-trigger characteristics. 1) Parameter nominal supply voltage Supply current @ fIn=0 hz Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty cycle Turn-on delay Turn-off delay Creepage distance primary-secondary Creepage secondary-secondary Clearance distance primary-secondary Clearance distance secondary-secondary Dielectric test voltage (600 v/1200 v versions) Dielectric test voltage (1700 v versions) Partial discharge extinction voltage (600/1200 v versions) Partial discharge extinction voltage (1700 v versions) dv/dt immunity, input to output Operating temperature 2SP0115T2Ax-xx Operating temperature 2SP0115T2Bx-xx Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. Min -8 0 0 12.6 6.6 12.3 6.6 3800 5000 1200 1700 -20 -40 Typical 15 33 1 +15/-8 75 65 50 Max 220 +15 50 100 +85 +85 Unit v mA mA W v A khz % ns ns mm mm mm mm vAC vAC vpeak vpeak kv/us degC degC BASIC SChEMATIC OF ThE 2SP0115T The driver contains all necessary components for optimal and safe driving of the relevant IGBT module: smallest gate resistors in order to minimize switching losses, gate clamping, active-clamping diodes (overvoltage protection at turn-off), vce monitoring (short-circuit protection) as well as the input electrical connector X1. Moreover, it includes components for setting the turn-off trip level, the response time and the dead time between both channels in half-bridge mode. Its plug-and-play capability means that it is ready to operate immediately after mounting. The user needs to invest no effort in designing or adjusting the driver for a specific application. OrDErInG InFOrMATIOn 2SP0115T DUAL-ChAnnEL SCALE™-2 PLUG-AnD-PLAy DrIvEr 2SP0115T 1) Type Designation 2SP0115T2A0 2SP0115T2B0 (-20…85 degC) (-40…85 degC) 2SP0115T2A0-xx or 2SP0115T2B0-xx xx: voltage basic type (for any module type)1) xx = 06 (600 v) / xx = 12 (1200 v) / xx = 17 (1700 v) 2SP0115T2C0-xx xx: voltage basic type xx = 06 (600 v) / xx = 12 (1200 v) / xx = 17 (1700 v) 15 v logic level, extended operating temperature (-40…85 degC) Gate resistors have to be soldered by customer © 2015 | www.power.com/igbt-driver Description Standard version Extended operating temperature xx: specific module type (Infineon, Fuji, Mitsubishi, Starpower, Powerex) such as 2MBI300vn-120-50 Page 27 2SP0320 SCALE™-2 Plug-and-Play IGBT Driver 2SP0320 Series – Dual-Channel Driver for PrimePACK™ and Equivalent IGBT Modules with Electrical or Fiber-Optic Interfaces. PrODUCT DESCrIPTIOn The 2SP0320 is the ultimate driver platform for PrimePACK™ and equivalent IGBT modules various manufacturers. As a member of the Power Intergrations plug-and-play driver family, it satisfies the requirements for optimized electrical performance and noise immunity. The highly integrated SCALE™-2 chipset reduces the component count by 80 % compared to conventional solutions, thus significantly increasing reliability and reducing costs. Thanks to SCALE™-2 technology, the 2SP0320 family comprises complete and extremely compact two-channel IGBT drivers equipped with DC/DC converters, shortcircuit protection, advanced active clamping and supply-voltage monitoring. The embedded paralleling capability allows easy inverter design covering higher power ratings. Specifically adapted drivers are available for all module types. All drivers are available with electrical and fiber-optic interfaces. PrimePACK™ is a registered trademark of Infineon Technology AG Page 28 The driver contains all necessary components for optimal and safe driving of the relevant IGBT module: smallest gate resistors in order to minimize switching losses, gate clamping, active-clamping diodes (overvoltage protection at turn-off), vce monitoring (short-circuit protection) as well as the electrical connector input X1. Moreover, it includes components for setting the turn-off trip level, the response time and the dead time between both channels in half-bridge mode. Its plug-and-play capability means that it is ready to operate immediately after mounting. The user needs invest no effort in designing or adjusting the driver to a specific application. APPLICATIOnS - Wind-power converters - Traction inverters - Industrial drives - Induction heating - Elevators - UPS and SMPS - Medical (MrT, CT, X-ray) - Laser technology KEy BEnEFIT Ultimate driver platform for PrimePACK™ and equivalent IGBTs with an electrical or fiber-optic interface. Component count reduced by 80 % thanks to the SCALE™-2 chipset. KEy FEATUrES - Compact plug-and-play solution up to 1.7 kv - very short delay time of <120 ns - Small jitter of +/-2 ns - Interface for 3.3 v…15 v logic level - Electrical or fiber-optic interfaces - Small jitter of +/-2 ns (electr. interface) - +15 v/-10 v gate driving - Easy mounting directly onto the IGBT - Embedded paralleling capability - Supports 2-level and 3-level converter topologies - IGBT short-circuit protection - Advanced active clamping - Isolated DC/DC converter - Supply under-voltage lockout - Safe isolation to En50178 - UL compliant - Superior EMC - reliable, long service life © 2015 | www.power.com/igbt-driver InTErFACE OPTIOnS The 2SP0320 driver series is available with one electrical and two fiber-optic interfaces. KEy DATA OvErvIEW Electrical Interface: 2SP0320T The DIC20 electrical interface is very simple and easy to use. The driver has the following terminals: - Power supply and GnD terminals - 2x drive signal inputs - 2x status outputs (failure returns) - 1x mode selection (half-bridge mode/direct mode) - 1x input to set the blocking time All inputs are ESD-protected and all digital inputs have Schmitt-trigger characteristics. Fiber-Optic Interfaces: 2SP0320V and 2SP0320S Fiber-optic links are used for the electrical insulation of the command and status-feedback signals. Two versions of the fiber-optic interfaces are available: - 2SP0320v versatile fiber-optic - 2SP0320S ST fiber-optic 1) Parameter nominal supply voltage Supply current 2SP0320T2xx @ fIn 0 hz Supply current 2SP0320v2xx and 2SP0320S2xx @ fIn 0 hz Supply current, full load 2SP0320T2xx Supply current, full load 2SP0320v2xx and 2SP0320S2xx Output power per channel Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty cycle Turn-on delay, 2SP0320T2xx Turn-off delay, 2SP0320T2xx Turn-on delay, 2SP0320v2xx and 2SP0320S2xx Turn-off delay, 2SP0320v2xx and 2SP0320S2xx Creepage distance primary-secondary Creepage distance secondary-secondary Dielectric test voltage Partial discharge extinction voltage dv/dt immunity, input to output Operating temperature OrDErInG InFOrMATIOn 2SP0320 SErIES xx: voltage basic type1) or xx: Specific module type Input signal interface On-Board connector © 2015 | www.power.com/igbt-driver -20 0 0 Typical 15 56 164 600 690 3 +15/-10 20 17 5000 1768 2SP0320T 2SP0320T2A0-xx 2SP0320T2C0-12 2SP0320T2C0-17 +20 30 100 50 +85 -40 Electrical interface 2SP0320T2A0: 3.3-15 v logic level 2SP0320T2C0: 15 v logic level Unit v mA mA mA mA W v A khz % ns ns ns ns mm mm vAC vpeak kv/us degC BASIC SChEMATIC OF ThE 2SP0320v 2SP0320V 2SP0320S 2SP0320v2A0-xx 2SP0320S2A0-xx versatile FOL Input/Output ST FOL Input/Output hFBr 2522ETZ/1522ETZ hFBr 2412Z/1412Z xx = 12 (1200 v) / xx = 17 (1700 v) xx = e.g. 2MBI900vXA-120E-50 DIC202) 90 90 120 100 Max Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual values of specific drivers. BASIC SChEMATIC OF ThE 2SP0320T Type designation Min Gate resistors have to be soldered by customer 2) Electrical connector on the driver: 71922-120LF from FCI, recommended cable connector: 71600-020LF from FCI. recommended twisted pair flat cable: 1700/20 or 2100/20 from 3M™ 1) Page 29 2SP0325 SCALE™-2 Plug-and-Play IGBT Driver 2SP0325 Perfect Driving of the new Mega Power Dual (nMPD) from Mitsubishi. PrODUCT DESCrIPTIOn Controlling the ever-faster-switching IGBT module innovations is our passion. The SCALE™-2-based 2SP0325 dual IGBT driver for Mitsubishi’s high current and high performance 1200 v and 1700 v modules demonstrates the features of this most advanced ASIC technology for gate drivers available on the market. It enables extremely fast analog control loops, which, in combination with dynamic advanced active clamping (DAAC), can switch the module faster and allows higher DC voltages than any other gate drive solution. With its excellent EMI ruggedness, the driver can sit directly on top of the module with no need for additional shielding measures. A really compact and clean design. The user can naturally choose between an electrical and fiber optic interface depending on his requirements. Combining Mitsubishi’s new MPD with Power Integrations' 2SP0325 leads to a system design with the highest power density in the 1MW inverter class. Page 30 APPLICATIOnS - Wind-power converters Solar inverters UPS systems Industrial drives KEy BEnEFIT Clean and simple gate-drive solution for fast-switching high-performance modules. KEy FEATUrES - high-power dual-channel Plug-and-Play IGBT gate driver - Schmitt-trigger input - Electrical 15 v logic level or fiber-optic interfaces - +15 v (regulated)/-10 v gate driving - Supports 3-level converter topologies - Paralleling capability - IGBT short-circuit protection - Isolated DC/DC converter - Supply under-voltage lockout - Creepage and clearance acc. to IEC60664-1 - UL compliant - Superior EMC - Dynamic Advanced Active Clamping (DAAC) © 2015 | www.power.com/igbt-driver KEy DATA OvErvIEW 1) Parameter nominal supply voltage Supply current @ fIn=0 hz Supply current, full load Output power per channel Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty Cycle Turn-on delay Turn-off delay Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage Partial discharge extinction voltage dv/dt immunity, input to output Operating temperature Min -25 0 12.5 12.5 1768 Maximum switching frequency depends on the IGBT gate charge. See data sheet for actual value of specific driver. BASIC SChEMATIC OF ThE 2SP0325T Typical 15 55 +15 v/-10 v 80 65 Max 573 2 25 5 100 5050 -40 50 85 Unit v mA mA W v A khz % ns ns mm mm vAC vpeak Kv/us degC BASIC SChEMATIC OF ThE 2SP0325v The driver contains all necessary components for optimal and safe driving of the relevant IGBT module: smallest gate resistors in order to minimize switching losses, gate clamping, active-clamping diodes (overvoltage protection at turn-off), vce monitoring (short-circuit protection) as well as the input electrical connector X1. Moreover, it includes components for setting the turn-off trip level, the response time and the dead time between both channels in half-bridge mode. Its plug-and-play capability means that it is ready to operate immediately after mounting. The user needs to invest no effort in designing or adjusting the driver to a specific application. OrDErInG InFOrMATIOn SCALE™-2 DUAL-ChAnnEL IGBT DrIvEr FOr MITSUBIShI’S nEW MEGA POWEr DUAL IGBT MODULES 2SP0325T 2SP0325v Type Designation 2SP0325T2A0 2SP0325v2A0 © 2015 | www.power.com/igbt-driver Description Electrical interface Fiber-optic interface with built in DC/DC Power Supply Lead free yes yes Page 31 1SP0635 SCALE™-2 Plug-and-Play IGBT Driver 1SP0635 Series Single-Channel Gate Driver Core 1.2 kv, 1.7 kv and 3.3 kv. Supports Direct Paralleling with Master-Slave Principle. PrODUCT DESCrIPTIOn The new 1SP0635 SCALE™-2 Plug-and-Play drivers are specifically designed for the reliable and safe driving of 130x140 mm and 190x140 mm high-voltage and high-power IGBT modules from the 1200 v to the 3300 v voltage class. They are optimally suited to high-reliability applications in railway technology and industry. The driver concept relies on a masterslave principle that allows the safe operation of parallel connected IGBT modules. The master (1SP0635v) can be used as a standalone driver without a slave to drive a single IGBT module or with up to three 1SP0635D slaves to drive up to four parallel-connected IGBT modules. The master is equipped with a fibre-optic interface and global fault management. In master-slave configurations, the slaves are connected to the master by a bus cable which distributes the common command signal and the secondary-side supply voltages of the DC/DC converter. The 1SP0635 drivers are based on Power Intergrations highly integrated SCALE™2 chipset. Thanks to SCALE™-2 technology, the new 1SP0635 family comprises highly integrated, high-performance, complete and extremely compact single-channel IGBT drivers. Page 32 The SCALE™-2 chipset reduces the component count by 85 % compared to conventional solutions, thus significantly increasing reliability and reducing costs. The drivers are equipped with Dynamic Advanced Active Clamping (DAAC), shortcircuit protection, built-in DC/DC converters, regulated turn-on gate driving voltage and supply-voltage monitoring. Perfectly matched driver versions are available for all mechanically compatible IGBT modules. The plug-and-play capability of the driver allows immediate operation after mounting. The user needs to invest no effort in designing or adjusting it to a specific application. APPLICATIOnS - Traction - railroad power supplies - Light rail vehicles - hvDC - Flexible AC transmission systems - Medium-voltage converters - Industrial drives - Wind-power converters KEy BEnEFIT reliable and safe operation of parallel connected high-voltage and high-power IGBT modules. KEy FEATUrES - Single channel driver - Compact Plug-and-Play solution - Fibre-optic interfaces - +15 v/-10 v gate driving - regulated gate voltage - Direct paralleling of IGBTs - 2-level and multilevel topologies - Embedded paralleling capability - Dynamic IGBT short-circuit protection - Dynamic Advanced Active Clamping DAAC - Built-in isolated DC/DC converter - Supply under-voltage lockout - Creepage and clearances acc. IEC 60077-1 - UL compliant - Superior EMC - Easy mounting directly onto the IGBT - Extremely reliable, long service life © 2015 | www.power.com/igbt-driver KEy DATA OvErvIEW 1) Parameter nominal supply voltage Supply current 1SP0635x2Mx @ fIn=0 hz Per additional 1SP0635D2Sx @ fIn=0 hz Supply current, full load 1SP0635x2Mx Output power (1SP0635v2Mx or 1SP0635SMx) Output power (1SP0635D2Sx) Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty cycle Turn-on delay Turn-off delay Creepage distance primary-secondary Clearance distance primary-secondary Dielectric test voltage (3.3 kv versions) Partial discharge extinction voltage (3.3 kv versions) Operating temperature Min Typical 15 120 35 325 3 2.6 +15/-10 -35 0 0 Max +35 30 100 190 185 21 21 6000 3630 -40 +85 Maximum switching frequency depends on the IGBT gate charge. See data sheet for the value of a specific driver. BASIC SChEMATIC OF ThE 1SP0635 DrIvEr SErIES 4-pin 15V Power Supply Interface Unit v mA mA mA W W v A khz % ns ns mm mm vAC vpeak degC X1 = = Dynamic Vce Monitoring Power Supply Monitoring Dz Dynamic Advanced Active Clamping C +15V Gate Monitoring FOL Input G Rg, on Cge * Turn-on Driver FOL Status Output X2 MASTEr-SLAvE SySTEM 1SP0635 SErIES 6-pin Paralleling Interfaces Gate resistors have to be soldered by customer © 2015 | www.power.com/igbt-driver 2) 1SP0635V Power Supply Monitoring C +15V Gate Monitoring Rg, on Paralleling Interface X2 6-pin Paralleling Interfaces Turn-on Driver Rg,off 3) G Cge * E * = optional Turn-off Driver X3 V-Type (Master) S-Type (Master) 1SP0635v2M1-xx 1SP0635S2M1-xx xx = 12 (1200 v) xx = 17 (1700 v) xx = 33 (3300 v) e.g. 5SnA1200E330100 IhM 130/190 versatile FOL Input/Output ST FOL Input/Output hFBr1522ETZ/2522ETZ hFBr1412Z/2412Z X2/X3 MBCOn-6-1-0 MBC61-xxx-0 (xxx=030,050,070,110)3) X1 right angle MBCOn-4-1-0; vertical MBCOn-4-2-0 MBC41-xxx-0 (xxx=035,045,070)3) Only for parallel operation, needs master for control Dz Dynamic Advanced Active Clamping OrDErInG InFOrMATIOn 1SP0635 DrIvEr SErIES 1) Turn-off Driver X3 The master (1SP0635v or 1SP0635S) can be used as perfect standalone driver without a slave to drive IGBT modules without parallel connection or with one to three 1SP0635D slaves to drive up to four parallel-connected IGBT modules. Paralleling is achieved by simply connecting the master and slaves via the provided paralleling interfaces X2 and X3, which are identical. Type designation plus xx: voltage basic type1) or xx: Specific module type Modul package Input signal interface On-board connector Bus interface On-board connector Connecting cable Power supply User-board connector Connecting cable Paralleling Interface E * = optional Rg,off Cable length in cm 1SP0635D D-Type (Slave)2) 1SP0635D2S1-xx n.a. n.a. n.a. n.a. n.a. Page 33 1SP0340 SCALE™-2 Plug-and-Play IGBT Driver 1SP0340 Most Compact Plug-and-Play Driver for 4.5 kv IGBT Modules in the Low voltage (6 kv) Package. PrODUCT DESCrIPTIOn KEy BEnEFIT The 1SP0340 SCALE™-2 single-channel Plug-and-Play driver is specifically designed for the reliable and safe driving of 130 x 140 mm and 190 x 140 mm IGBT modules with 6000 v isolation voltage and 4.5 kv blocking voltage. It is optimized for high-reliability applications in the rail industry. 1SP0340 drivers are equipped with Dynamic Advanced Active Clamping (DAAC), shortcircuit protection, regulated turn-on gate driving voltage and supply-voltagemonitoring. Proven high performance of this most compact gate driver solution for 4.5 kv IGBT’s with 6 kv isolation. The driver concept relies on a master/slave principle that enables parallel-connected IGBT modules to be operated safely. The master (1SP0340v) can be used as a standalone driver without slave to drive a single IGBT module, or with up to three slaves (1SP0340D) to drive up to four parallel-connected IGBT modules. APPLICATIOnS - - The master is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master via a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter. Traction inverters hvDC Light Wind-power converters Medium and high voltage drives Pulse power applications KEy FEATUrES Single-channel IGBT gate driver Compact Plug-and-Play solution Fibre-optic interfaces +15 v (regulated)/-10 v gate driving Direct paralleling of IGBTs 2-level and multilevel topologies Dynamic IGBT short-circuit protection Dynamic Advanced Active Clamping (DAAC) Supply under-voltage lockout Gate monitoring Active Miller clamping Creepage and clearances acc. to IEC60077-1 UL compliant Superior EMC Easy mounting directly onto the IGBT The SCALE™-2 chipset reduces the component count by 80 % when compared to conventional solutions, thus significantly increasing reliability and reducing costs. Page 34 © 2015 | www.power.com/igbt-driver FIBEr-OPTIC InTErFACE OPTIOnS Fiber-optic links are used to electrically isolate the command and status-feedback signals. Two versions are available: 1SP0340v equipped with versatile links KEy DATA OvErvIEW POWEr SUPPLy AnD ELECTrICAL ISOLATIOn The 1SP0340 driver is modular, so the driver card and power supply (DC/DC converter) are two separate units. This means that any driver that has been developed to match a specific IGBT module can be used for any required isolation specification. Only the separate power supply (ISO5125I) must be selected to match the specific application. A further benefit is that drivers for 4.5 kv IGBTs can be implemented in 2-level, 3-level and multi-level inverter topologies. For parallel-connected drivers, only one power supply is needed per switch. BASIC SChEMATIC OF ThE 1SP0340 1) Parameter nominal supply voltage fIn Supply current 1SP0340v2M0 @ fIn=0 hz Output power (1SP0340v2M0) Gate voltage Peak output current (gate current) Switching frequency fIn 1) Duty cycle Turn-on delay Turn-off delay Operating temperature Min -35 0 0 -40 Typical 25 180 2.8 ±15 Max Unit v mA W v A khz % ns ns degC 35 30 100 170 160 85 Maximum switching frequency depends on the IGBT gate charge. See data sheet for the value of a specific driver. High-Voltage Insulated DC/DC Power Supply 3-pin DC/DC Input X1 X0 4-pin 25V X1 Dynamic Vce Monitoring ISO5125I Power Supply Monitoring Dynamic Advanced Active Clamping Dz C +15V Gate Monitoring FOL Input G Rg, on Cge * Turn-on Driver FOL Status Output 6-pin Paralleling Interfaces X2 Paralleling Interface E * = optional Rg,off Turn-off Driver X3 High-Voltage Insulated DC/DC Power Supply X0 Dynamic Advanced Active Clamping X1 X1 Power Supply Monitoring ISO5125I (optional ) 6-pin Paralleling Interfaces X2 C +15V Gate Monitoring Rg, on Paralleling Interface Dz Turn-on Driver Rg,off G Cge * E * = optional Turn-off Driver X3 OrDErInG InFOrMATIOn 1SP0340 SCALE™-2 IGBT PLUG-AnD-PLAy DrIvEr Type designation plus xx: voltage basic type 1) or xx: Specific module type 1) 2) 3) Modul package DC/DC-Converter Input signal interface On-board connector Bus interface On-board connector Connecting cable Power Supply User-board connector Connecting cable driver/ISO Connecting cable ISO/User-board Gate resistors have to be soldered by customer Only for parallel operation, needs master for control Cable length in cm © 2015 | www.power.com/igbt-driver V-Type (Master) D-Type (Slave)2) 1SP0340v2M0-xx 1SP0340D2S0-xx 4500 v=45 e.g. FZ1200r45hL3 Ihv 130/140; 190/140 ISO5125I-xx (xx: 4500 v=45 / 6500 v=65 / 10000 v=100 / 12000 v=120) versatile FOL Input/Output n.a. hFBr-2522ETZ/1522ETZ n.a. X2/X3 MBCOn-6-1-0 (on 1SP0340) MBC61-xxx-0 (xxx=030,050,070,110)3) X0/X1 right angle MBCOn-3-1-0; vertical MBCOn-3-2-0 MBC41-xxx-0 (xxx=035,045,070,110)3) MBC31-100-0 Page 35 1SP0335 SCALE™-2 Plug-and-Play IGBT Driver 1SP0335 Series Single Channel Driver 6.5 kv/4.5 kv with Separate Power Supply Unit for high voltage IGBT Modules (10.2 kv Iso). DC/DC converter ISO5125I connected to 1SP0335D (slave) with 1SP0335v (master) each screwed onto a 6.5 kv IGBT module. PrODUCT DESCrIPTIOn KEy BEnEFIT The 1SP0335 SCALE™-2 Plug-and-Play drivers are specifically designed for the reliable and safe driving of 130x140 mm and 190x140 mm IGBT modules with 10.2 kv isolation voltage and blocking voltages from 3.3 kv to 6.5 kv. They are optimally suited to high-reliability applications in railway technology and industry. The driver concept relies on a master-slave principle that allows the safe operation of parallel connected IGBT modules. The master (1SP0335v or 1SP0335S) can be used as a stand-alone driver without a slave to drive a single IGBT module or with up to three 1SP0335D slaves, to drive up to four parallel connected IGBT modules. The master is equipped with a fibre-optic interface and global fault management. In master-slave configurations, the slaves are connected to the master by a bus cable which distributes the common command signal and the secondary-side supply voltages for the DC/DC converter. The 1SP0335 drivers are based on Power Integrations highly integrated SCALE™-2 chipset. Thanks to SCALE™-2 technology, the new 1SP0335 family comprises highly integrated, high-performance, complete and extremely compact single-channel IGBT drivers. Page 36 The SCALE™-2 chipset reduces the component count by 85 % compared to conventional solutions, thus significantly increasing reliability and reducing costs. The drivers are equipped with Dynamic Advanced Active Clamping (DAAC), shortcircuit protection, regulated turn-on gate driving voltage and supply-voltage monitoring. Perfectly matched driver versions are available for all mechanically compatible IGBT modules. The plug-and-play capability of the driver allows immediate operation after mounting. The user needs to invest no effort in designing or adjusting it to a specific application. APPLICATIOnS - Traction - railroad power supplies - Light rail vehicles - hvDC - Flexibel AC transmission systems - Medium-voltage converters - Industrial drives - Wind-power converters reliable and safe operation of parallel connected high-voltage and high-power IGBT modules. KEy FEATUrES - Single channel driver - Compact Plug-and-Play solution - Fibre-optic interfaces - +15 v (regulated)/-10 v gate driving - Direct paralleling of IGBTs - 2-level and multilevel topologies - Dynamic IGBT short-circuit protection - Dynamic Advanced Active Clamping DAAC - Supply under-voltage lockout - Creepage and clearances acc. IEC 60077-1 - UL compliant - Superior EMC - Easy mounting directly onto the IGBT - Extremely reliable, long service life © 2015 | www.power.com/igbt-driver KEy DATA OvErvIEW Parameter nominal supply voltage fIn 1) Supply current 1SP0335x2Mx @ fIn=0 hz per additional 1SP0335D2Sx @ fIn=0 hz Output power (1SP0335v2Mx) Output power (1SP0335D2Sx) Gate voltage Peak output current (gate current) Switching frequency fIn 2) Duty cycle Turn-on delay Turn-off delay Operating temperature 1) 2) Min Typical 25 45 20 3.5 3.3 +15/-10 -35 0 0 Max +35 30 100 190 185 -40 Unit v mA mA W W v A khz % ns ns degC +85 25 v is the nominal output voltage of the ISO5125I power supply. The power supply works with nominal 15 v input voltage. Maximum switching frequency depends on the IGBT gate charge. See data sheet for the value of a specific driver. BASIC SChEMATIC OF ThE 1SP0335 DrIvEr SErIES High-Voltage Insulated DC/DC Power Supply 3-pin DC/DC Input X1 X0 4-pin 25V X1 Dynamic Vce Monitoring ISO5125I Power Supply Monitoring Dynamic Advanced Active Clamping Dz C +15V Gate Monitoring FOL Input G Rg, on Cge * Turn-on Driver FOL Status Output 6-pin Paralleling Interfaces X2 Paralleling Interface Turn-off Driver X3 1SP0335V High-Voltage Insulated DC/DC Power Supply X0 Dynamic Advanced Active Clamping X1 X1 Power Supply Monitoring ISO5125I (optional ) X2 The master (1SP0335v or 1SP0335S) can be used as perfect standalone driver without a slave to drive IGBT modules without parallel connection or with up to three 1SP0335D slaves, to drive up to four parallel-connected IGBT modules. Paralleling is achieved by simply connecting the master and slaves via the provided paralleling interfaces X2 and X3, which are identical. © 2015 | www.power.com/igbt-driver C +15V Turn-on Driver Rg,off G Cge * E * = optional Turn-off Driver X3 MASTEr-SLAvE SySTEM 1SP0335 SErIES Dz Gate Monitoring Rg, on Paralleling Interface 6-pin Paralleling Interfaces E * = optional Rg,off 1SP0335D In contrast to the other SCALE™-2 plug-and-play drivers, the drivers of the 1SP0335 family are modular in the sense that the driver card and power supply (DC/DC converter) are two separate units. Thanks to this modular concept, any driver unit that was developed to match a specific IGBT module can be used for any required insulation specifications. Only the separate power supply unit ISO5125I must be chosen to a specific application. Page 37 ELECTrICAL InSULATIOn AnD POWEr SUPPLy WITh ISO5125I The ISO5125I is a single-channel insulated DC/DC converter suitable as a power supply for IGBT drivers up to 6.5 kv. It complements the 1SP0335 and 1SP0340 high-voltage s. Its output power of 5 W enables switching frequencies up to 5 khz for 6.5 kv/750 A IGBTs. On the basis of this concept, the drivers for IGBTs in the voltage range from 3.3 kv to 6.5 kv can be implemented in 2-level, 3-level and multi-level inverter topologies. The driver unit is mounted directly onto the IGBT module by means of three screws. The power supply unit ISO5125I is designed as a separate module attached close to the IGBT. For parallel connected drivers, only one power supply is needed per switch. OrDErInG InFOrMATIOn 1SP0335 DrIvEr SErIES Type designation plus xx: voltage basic type)1) or xx: Specific module type) 1) 2) 3) Modul package DC/DC-Converter Input signal interface On-board connector Bus interface On-board connector Connecting cable Power Supply User-board connector Connecting cable driver/ISO Connecting cable ISO/User-board Gate resistors have to be soldered by customer Only for parallel operation, needs master for control Cable length in cm Page 38 V-Type (Master) S-Type (Master) 1SP0335v2M1-xx 1SP0335S2M1-xx 3300 v=33 / 4500 v=45 / 6500 v=65 e.g. 5SnA1200G330100 Ihv 130/140; 190/140 ISO5125I-xx (xx: 4500 v=45 / 6500 v=65 / 10000 v=100 / 12000 v=120) versatile FOL Input/Output ST FOL Input/Output hFBr-2522Z/1522Z hFBr-2412Z/1412Z X2/X3 MBCOn-6-1-0 (on 1SP0335) MBC61-xxx-0 (xxx=030,050,070,110)3) X0/X1 right angle MBCOn-3-1-0; vertical MBCOn-3-2-0 MBC41-xxx-0 (xxx=035,045,070,110)3) MBC31-100-0 D-Type (Slave)2) 1SP0335D2S1-xx n.a. n.a. © 2015 | www.power.com/igbt-driver MAnUFACTUrEr POWEr InTEGrATIOnS SWITZErLAnD GMBh Johann-renfer-Strasse 15 2504 Biel-Bienne, Switzerland Phone +41 32 344 47 47 Fax +41 32 344 47 40 Email [email protected] Website www.power.com/igbt-driver POWEr InTEGrATIOnS WOrLDWIDE hIGh POWEr CUSTOMEr SUPPOrT LOCATIOnS WOrLD hEADQUArTErS 5245 hellyer Avenue San Jose, CA 95138 | USA Main +1 408 414 9200 Customer Service: Phone +1 408 414 9665 Fax +1 408 414 9765 Email [email protected] SWITZErLAnD (BIEL) Johann-renfer-Strasse 15 2504 Biel-Bienne | Switzerland Phone +41 32 344 47 47 Fax +41 32 344 47 40 Email [email protected] GErMAny (EnSE) hellwegForum 1 59469 Ense | Germany Phone +49 2938 643 9990 Email [email protected] GErMAny (MUnICh) Lindwurmstrasse 114 80337 Munich | Germany Phone +49 895 527 39110 Fax +49 895 527 39200 Email [email protected] ChInA (ShAnGhAI) rm 2410, Charity Plaza, no. 88 north Caoxi road Shanghai, PrC 200030 Phone +86 21 6354 6323 Fax +86 21 6354 6325 Email [email protected] ChInA (ShEnZhEn) 17/F, hivac Building, no 2, Keji South 8th road, nanshan District Shenzhen | China, 518057 Phone +86 755 8672 8725 Fax +86 755 8672 8690 hotline +86 400 0755 669 Email [email protected] ITALy (MILAnO) via Milanese 20, 3rd. Fl. 20099 Sesto San Giovanni | Italy Phone +39 024 550 8701 Fax +39 028 928 6009 Email [email protected] UK (hErTS) First Floor, Unit 15, Meadway Court, rutherford Close, Stevenage, herts SG1 2EF | United Kingdom Phone +44 1252 730 141 Fax +44 1252 727 689 Email [email protected] InDIA (BAnGALOrE) #1, 14th Main road vasanthanagar Bangalore 560052 | India Phone +91 80 4113 8020 Fax +91 80 4113 8023 Email [email protected] JAPAn (KAnAGAWA) Kosei Dai-3 Bldg., 2-12-11, Shin-yokohama, Kohoku-ku, yokohama-shi, Kanagawa 222-0033 | Japan Phone +81 45 471 1021 Fax +81 45 471 3717 Email [email protected] KOrEA (SEOUL) rM 602, 6FL Korea City Air Terminal B/D, 159-6 Samsung-Dong, Kangnam-Gu Seoul 135-728 | Korea Phone +82 2 2016 6610 Fax +82 2 2016 6630 Email [email protected] TAIWAn (TAIPEI) 5F, no. 318, nei hu rd., Sec. 1 nei hu Dist. Taipei 11493 | Taiwan r.O.C. Phone +886 2 2659 4570 Fax +886 2 2659 4550 Email [email protected] www.power.com