UNISONIC TECHNOLOGIES CO., LTD SRV05-4 Preliminary DIODE LOW CAPACITANCE TVS DIODE ARRAY DESCRIPTION The UTC SRV05-4 is a low capacitance TVS diode array, it uses UTC’s advanced technology to provide customers with low leakage current and low clamping voltage, etc. The UTC SRV05-4 is suitable for high-speed data lines such as firewire , DVI and Ethernet. FEATURES * Low clamping voltage * Low leakage current * 4 I/O lines protection ORDERING INFORMATION Ordering Number Lead Free Halogen Free SRV05-4L-AG6-R SRV05-4G-AG6-R SRV05-4L-AG6-R Package Packing SOT-26 Tape Reel (1)Packing Type (1) R: Tape Reel (2)Package Type (2) AG6 : SOT-26 (3)Halogen Free (3) G: Halogen Free, L: Lead Free MARKING www.unisonic.com.tw Copyright © 2012 Unisonic Technologies Co., Ltd 1 of 4 QW-R601-076.a SRV05-4 Preliminary PIN CONFIGURATION PIN DESCRIPTION PIN NO. 1 2 3 4 5 6 PIN NAME I/O GND I/O I/O VCC I/O DESCRIPTION Terminal of ESD 1 Ground Terminal of ESD 2 Terminal of ESD 3 Supply Voltage (low clamping voltage to ground) Terminal of ESD 4 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw DIODE 2 of 4 QW-R601-076.a SRV05-4 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT ESD Voltage (HBM Contact) VESD >8 kV Peak Pulse Power (8/20μs Waveform) PPP 350 W Peak Pulse Current (8/20μs Waveform) IPPM 12 A Storage Temperature TSTG -55~+150 °C Operating Junction Temperature TJ -55~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS PARAMETER Reverse Stand-Off Voltage Reverse Breakdown Voltage Reverse Leakage Current SYMBOL VWRM VBR IR Clamping Voltage (8/20μs) VC Off State Junction Capacitance CJ TEST CONDITIONS IBR=1mA, PIN 5 to 2 VR=5V, PIN 5 to 2 IPP=1A, ANY I/O pin to pin 2 IPP=5A, ANY I/O pin to pin 2 0Vdc, f=1.0MHZ, between I/O lines and GND 0Vdc, f=1.0MHZ, between I/O lines UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 5 V 6 V 1.2 5 μA 12 V 17 V 1.1 1.2 pF 0.55 0.60 pF 3 of 4 QW-R601-076.a SRV05-4 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R601-076.a