UNISONIC TECHNOLOGIES CO., LTD UD12K DUAL TRANSISTOR GENERAL PURPOSE (DUAL DIGITAL TRANSISTOR) FEATURES * Both the DTA144E chip and DTC144E chip in a SOT-363 package. * NPN/PNP silicon transistor(Built-in resistor type) EQUIVALENT CIRCUIT 6 5 R1 4 R2 TR1 TR2 R2 1 R1 2 3 ORDERING INFORMATION Ordering Number Lead Free Halogen-Free UD12KL-AL6-R UD12KG-AL6-R Package SOT-363 1 E1 Pin Assignment 2 3 4 5 6 B1 C2 E2 B2 C1 Packing Tape Reel MARKING www.unisonic.com.tw Copyright © 2010 Unisonic Technologies Co., Ltd 1 of 4 QW-R218-005.C UD12K DUAL TRANSISTOR ABSOLUTE MAXIMUM RATINGS (Ta=25°C) TR1 (PNP) PARAMETER Supply Voltage Input Voltage Output Current Total Power Dissipation (120mW per element must not be exceeded) Junction Temperature Storage Temperature SYMBOL VCC VIN IC RATINGS -50 -40~10 -100 UNIT V V mA PD 150 mW TJ TSTG +150 -55 ~ +150 °C °C SYMBOL VCC VIN IC RATINGS 50 -10~40 100 UNIT V V mA PD 150 mW TJ TSTG +150 -55 ~ +150 °C °C TR2 (NPN) PARAMETER Supply Voltage Input Voltage Output Current Total Power Dissipation (120mW per element must not be exceeded) Junction Temperature Storage Temperature Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (Ta=25℃) TR1 (PNP) PARAMETER Input Voltage Output Voltage Input Current Output Current DC Current Gain Collector-Emitter Saturation Voltage Transition Frequency Input Resistance Resistance Ratio SYMBOL VI(OFF) VI(ON) VO(ON) IIN IO(OFF) hFE VCE(SAT) fT R1 R2/R1 TEST CONDITIONS VCC=-5V, IOUT=-100μA VOUT=-0.3V, IOUT=-2mA IOUT=-10mA, IIN=-0.5mA VIN=-5V VCC=-50V, VIN=0V VOUT=-5V, IOUT=-5mA IC=5mA, IB=0.25mA VCE=-10V, IE=-5mA, f=100MHz (Note) SYMBOL VI(OFF) VI(ON) VO(ON) IIN IO(OFF) hFE VCE(SAT) fT R1 R2/R1 TEST CONDITIONS VCC=5V, IOUT=100μA VOUT=0.3V, IOUT=2mA IOUT=10mA, IIN=0.5mA VIN=5V VCC=50V, VIN=0V VOUT=5V, IOUT=5mA IC=-5mA, IB=-0.25mA VCE=10V, IE=-5mA, f=100MHz (Note) MIN -3 TYP MAX UNIT -0.5 V V -0.1 -0.3 V -0.18 mA -0.5 µA 68 32.9 0.8 0.1 250 47 1 0.3 V MHz 61.1 KΩ 1.2 TR2 (NPN) PARAMETER Input Voltage Output Voltage Input Current Output Current DC Current Gain Collector-Emitter Saturation Voltage Transition Frequency Input Resistance Resistance Ratio MIN 3 TYP MAX UNIT 0.5 V V 0.1 0.3 V 0.18 mA 0.5 µA 68 32.9 0.8 -0.1 250 47 1 -0.3 V MHz 61.1 KΩ 1.2 Note: Transition frequency of the device UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R218-005.C UD12K DUAL TRANSISTOR TYPICAL CHARACTERISTICS Input Voltage, VI(ON) (V) Output Current, IOUT (A) TR1 (PNP) Input Voltage, VI(ON) (V) Output Current, IOUT (A) TR2 (NPN) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 4 QW-R218-005.C UD12K DUAL TRANSISTOR TYPICAL CHARACTERISTICS(Cont.) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R218-005.C