P OWER TRANS FOR MER Chassis Mount : International Series VPL26-1800 Electrical Specifications (@25C) 1. Maximum Power: 25.0VA 2. Input Voltage – Series: 230VAC @ 50/60Hz, Parallel: 115VAC@ 50/60Hz 1 3. Output Voltage : 26.8V CT@ 1.866A 4. Voltage Regulation: 20% TYP @ full load to no load 5. Hipot: 3500VAC between primary to secondary and windings to core. BLK WHT BRN BLU Construction: Dual winding construction with an insulated shroud, both made of a high temperature material that exceeds UL flammability requirements. Shrouds are provided over the connections of the leads to the windings on both primary and secondary coils. Devices are designed with a minimum of 6mm creepage distance between the primary and secondary and are manufactured with a Class B (130°C) insulation system. E A YEL TUV Certificate No.: R72103639, EN60950, Information Technology RED Agency Files: B Dimensions: D Units: In inches A B C D E F 2.562 4.00 2.250 3.562 8.00 0.187 C F Weight: 2.3 lbs. Connections2: Input: Series – BLK to BLU, Jumper WHT to BRN Parallel – BLK to BLU, Jumper BLK to BRN and WHT to BLU BLK Output: RED to YEL RED RoHS Compliance: As of manufacturing date February 2005, all standard products meet the requirements of 2011/65/EU, known as the RoHS initiative. WHT BRN YEL * Upon printing, this document is considered “uncontrolled”. Please contact Triad Magnetics’ website for the most current version. BLU 1 Non-Inherently limited. Class 2 not wet, Class 3 wet. Primary and secondary windings are designed to be connected in series or parallel. Winding are not intended to be used independently. 2 Web: www.TriadMagnetics.com Phone 951-277-0757 Fax 951-277-2757 460 Harley Knox Blvd. Perris, California 92571 SCHEMATIC Publish Date: December 4, 2013