Download

VICOR CORPORATION
Power Solutions
Vicor's product line of modular power components and complete power systems
includes thousands of combinations of input voltage, output voltage, and power
levels, complete with accessory components that integrate other power system
functions. Together, these products allow designers around the world to meet their
unique power requirements by selecting and interconnecting standard modular
parts. The benefits for you are rapid, flexible design of complete power systems at
any power level.
If you don't find the converter you need from our thousands of predefined DC-DC
converters, you can design your own custom product on the web using Vicor's
PowerBench Design System. We offer a wide range of solutions with 1 – 20 outputs
and autoranging, PFC, or three-phase inputs. There are several chassis sizes to
choose from, both with and without integral cooling fans. Also available from Vicor
is a strong offering of front ends and filters to complete your design. Our extensive
MIL-COTS product line incorporates the technology and features of our commercial
products into a cost-effective alternative for military, aerospace, and other highreliability, harsh-environment applications. Standard inputs of 28, 48, 155, 270, and
375 Vdc are available.
Vicor is pioneering the second wave of the power component revolution with the
introduction of flexible, high-performance power components. V•I Chip™ Factorized
Power Architecture provides the means to more efficient power distribution and
the V•I Chips provide the building blocks with the right attributes of high density
and efficiency, flexibility, and fast transient response that enable power architects to
more easily design small, high-performance, cost-effective power system solutions.
V•I Chip PRMs™ (regulators), VTMs™ (voltage transformers) and BCMs™ (bus
converters) are available for a wide range of DC-DC conversion and Intermediate
Bus Architecture applications. MIL-COTS versions are also available.
New power options are available with Picor’s first standard semiconductor solution
– Cool–ORing™ – that can substantially reduce power dissipation and size, while
providing superior dynamic response for Active ORing applications in redundant
power architectures. Another new option is the new modular power platform:
VI BRICK. The new VI BRICK family is an advanced modular power platform that
incorporates the superior technical attributes of V•I Chip technology and a robust
packaging that facilitates thermal management and through-hole assembly.
Models include high-current density / low-voltage DC-DC converters, a wide range
of highly efficient bus converters (BCM), and individual modules – PRM and VTM –
for both regulation and transformation.
Vicor Custom Power provides complete power solutions for communications,
industrial, datacom, test equipment, medical diagnostics, and MIL-COTS. Using
the extensive Vicor line of DC-DC converters in a modular, building-block design
approach, Custom Power offers total solutions to unique power requirements in
the shortest possible time.
All our products deliver agency-approved reliability and the predictable performance
of field-proven power technology, including conformance to RoHS if desired. Vicor
is ISO 9001:2000 certified and places heavy emphasis on the "Plan-Do-Check-Act"
model (PDCA) to foster continuous improvement. This enables proactive actions to be
undertaken to improve our technology, our products, our processes, and our service
to our customers. Our new Quality Center on vicorpower.com enables quality
managers, purchasing agents, and designers to see comprehensive video of our
facilities as well as generate customized ISO 9001:2000 reports about our quality
systems.
Be assured that Vicor is on a continuous quest for the best technical solution for
you. Moreover, our commitment to the elegance and affordability of your design is
backed up by our global staff of experienced applications engineers. Rely on Vicor
as your dedicated design partner.
TABLE OF CONTENTS
Product Overview Chart ............................................2 – 3
DC-DC V•I Chip™ Advantage .......................................... 4
Power Conversions Using PRM, VTM & BCMs................ 4
Bus Converter (BCM™)................................................... 5
Regulator (PRM™).......................................................... 6
Voltage Transformer (VTM™).......................................... 7
VI BRICKs ......................................................................... 8
PRM, VTM, BCM & DC-DC Converter .................... 8 – 11
DC-DC BRICKs.................................................................12
VI-200 & VI-J00 Series Converter Modules..............12 – 13
Maxi, Mini & Micro Series Converter Modules ......14 – 15
Power Path Management Solutions.............................16
Cool-ORing™ Series...............................................16 – 17
AC-DC Front Ends ......................................................... 18
Harmonic Attenuator Module (HAM) .......................... 18
AC-DC / DC-DC PFC FrontEnd................................... ...19
Alternating Input Module (AIM) .................................. 20
Autoranging Rectifier Module (ARM) ...........................21
Filter / Autoranging Rectifier Module (FARM) ............... 21
Modular AC Front-end System (ENMods) .................... 22
Brick ...............................................................................23
BatMod Battery Charger...............................................23
Packaging Options....................................................... 23
Filters............................................................................. 24
Filter Input Attenuator Module (FIAM)......................... 24
Input Attenuator Module (IAM)................................... 24
Ripple Attenuator Module (RAM) .................................25
Output Ripple Attenuator Module (MicroRAM) ........... 25
Active EMI Filters (QPI Family) ...................................... 26
Output Ripple Attenuators (QPO Family) ..................... 27
WHAT’S NEW
Vicor develops new products all the time, so, to keep everyone up-to-date,
we’ve created a special area on vicorpower.com where you can always see
“what’s new.” Just go to vicorpower.com and click on “What’s New.” It will
take you to our new products page. From there you’ll be able to link to
detailed design information.
Web ExpressCode
Web ExpressCode provides quick access to
detailed product information
Each product description in the Vicor catalog includes a unique Web
ExpressCode. Each code provides direct access to the corresponding,
information rich product pages on vicorpower.com. Just enter the Web
ExpressCode into the Web ExpressCode search box on vicorpower.com’s
homepage. You’ll be sent to the exact page you want with access to all
related information such as product description, operating specifications,
access to data sheets, outline drawings, and product configuration tools.
AC-DC / DC-DC Configurable Power Solutions ........... 28
AC-DC FlatPAC Family ................................................. 28
AC-DC PFC FlatPAC...................................................... 29
AC-DC VIPAC Power System........................................ 30
DC-DC VIPAC Arrays.....................................................31
DC-DC ComPAC Family ............................................... 32
DC-DC MegaMod Family..............................................33
MIL-COTS Products.................................................34 – 37
Westcor Configurable Power Solutions ...................... 38
AC-DC / DC-DC LoPAC Family...................................... 38
AC-DC / DC-DC FlatPAC-EN..........................................39
AC-DC / DC-DC MegaPAC Family..................................40
DC-DC (only) ConverterPACs ...................................... 41
Custom Power Solutions ...................................... 42 – 43
Custom Configurable Power Solutions ................ 44 - 45
DC-DC MegaPAC ........................................................ 44
VME450 DC-DC Power Supply......................................44
Badger AC-DC Power Supply....................................... 45
Javelin AC-DC Power Supply ....................................... 45
PowerBank AC-DC Power Supply ................................ 45
PowerBench™ You Design It ,We Build It
PowerBench is the most advanced suite of online power tools avaliable.
They can help you design, select and configure products whether you are just
beginning or experienced in designing power, PowerBench can take you from
beginning to end of any power project. All of this in real time.
See for yourself what Vicor can do for you
on Page 55 or go to the Vicor website,
click PowerBench and start building.
Evaluation Boards................................................. 46 – 47
Accessories ............................................................ 48 – 52
PO
ERBENCH
Quality / RoHS Compliance ......................................... 53
Vicorpower.com Technical ........................................... 54
PowerBench Tools ........................................................ 55
Applications Support.....................................................56
Customer Support .........................................................57
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
1
OVERVIEW
V•I Chip & VI BRICK Solutions
DC-DC Products
Bus Converter
330 – 365 Vin
BCM
360 – 400 Vin
BCM
38 – 55 Vin
BCM
38 – 55 Vin
PRM
36 – 75 Vin
PRM
Regulator
Up to 240 W
18 – 36 Vin
PRM
Regulator
Up to 120 W
MIL-COTS
16 – 50 Vin
MQPI
Active ORing: (48 V bus or lower)
Discrete Controller
24 Vdc, 48 Vdc
QPI
M-PRM
10.3 – 11.4 Vdc, Up to 300 W; 41.25 – 45.6 Vdc, Up to 300 W
Bus Converter
11.2 – 12.5 Vdc, Up to 300 W; 45 – 50 Vdc, Up to 330 W
Bus Converter
1.2 – 55 V, Up to 300 W
Regulator
Up to 320 W
MIL-COTS Regulator
Up to 120 W
VTM
M-VTM
Voltage Transformer 0.8 – 55 V
Up to 100 A or 300 W
MIL-COTS Voltage Transformer 1 – 50 V
Up to 100 A or 120 W
Active ORing: (12 V bus or lower)
Discrete Controller & Full-Function
Solutions
EMI Filter
Hot-Swap Controller
Component Power Solutions: VI-200 & VI-J00 Series
AC-DC Products
DC-DC Products
Harmonic Attenuator Module
Unity Power Factor
Universal
85 – 264 Vac
DC-DC Converter
VI-200 / MI-200
Up to 675 W per module
25 – 200 W per module
1 – 95 Vdc
More Power? Add a Booster.
Output Ripple Attenuation Module
combines active and passive filtering.
Rectifier / EMI Filter
Up to 250 W
Universal
85 – 264 Vac
Autoranging
90 – 132 Vac
180 – 264 Vac
RAM
Filter / Autoranging Rectifier Module
Up to 1,000 W
VI-200 / MI-200
QPO
Another Output? Add a Driver.
Autoranging
90 – 132 Vac
180 – 264 Vac
Autoranging Rectifier Module
QPO provides active filtering
to achieve differential noise
attenuation.
Up to 1,500 W
Programmable Current Source
DC-DC Products
10 – 400 Vdc
24, 28, 48, 270,
300 Vdc
24, 28, 48 Vdc
IAM /
MI-IAM
EMI Filter / Transient Protection
Up to 400 W
Active ORing: (48 V bus or lower)
Discrete Controller
VI-J00 /
MI-J00
DC-DC Converter
10 – 100 W per module
Active ORing: (12 V bus or lower)
Discrete Controller & Full-Function
Solutions
Active EMI Filter
Up to 576 W @ 48 V
QPI
Component Power Solutions: Maxi, Mini, Micro & VI BRICK Series
DC-DC Products
AC-DC Products
Universal
85 – 264 Vac
HAM
High-Boost
Autoranging
90 – 132 Vac
180 – 264 Vac
Harmonic Attenuator Module
Unity Power Factor
Filter / Autoranging Rectifier Module
Up to 1,000 W
Autoranging
90 – 132 Vac
180 – 264 Vac
Autoranging Rectifier Module
FARM3
Front-end System
for EN Compliance
Up to 550 W
MINIHAM
Nominal Input
10 – 425 Vdc
2
Up to 600 W per module
1 – 54 Vdc
Output Ripple Attenuation
Module combines active and
passive filtering.
DC-DC Converter
Up to 300 W per module
1 – 48 Vdc
QPO
QPO provides active filtering
to achieve differential noise
attenuation.
DC-DC Converter
DC-DC Products
24, 28, 48 Vdc
Single wire paralleling for
high power, fault tolerant arrays.
Up to 1,500 W
Autoranging
115 – 230 Vac
Input
28, 48, 270 Vdc
DC-DC Converter
Up to 675 W
per module
Transient Protection,
Inrush Current Limiting EMI Filter
Up to 25 A
Active ORing: (48 V bus or lower)
Discrete Controller
QPI
Active EMI Filter
Up to 576 W @ 48 V
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
Up to 150 W per module
1 – 48 Vdc
48 Vin
VI BRICK
Up to 220 W per module
1 – 48 Vdc
Active ORing: (12 V bus or lower)
Discrete Controller & Full-Function
Solutions
OVERVIEW
Configurable Power Solutions
VIPAC Power Systems
MAXI
1 – 3 Outputs using
Maxi, Mini & Micro
Series Modules
90 – 132 Vac
180 – 264 Vac
Up to
900 W
MINI
MICRO
LoPAC Family
VI-200
VI-J00
1 – 6 Outputs using
VI-200, VI-J00 Series or
Maxi, Mini & Micro
Series Modules
85 – 264 Vac
100 – 380 Vdc
Up to
1,500 W
MAXI
MINI
MICRO
FlatPAC Family
Up to 600 W
VI-200
1 – 3 Outputs using
VI-200 / Maxi
Series Modules
90 – 132 Vac
180 – 264 Vac
85 – 264 Vac (PFC)
Up to 575 W
MAXI
PFC FrontEnd
1 – 4 Outputs using
VI-200, VI-J00 Series or
Maxi, Mini & Micro
Series Modules
85 – 264 Vac
100 – 380 Vdc
Can also be used
with VIPAC Array,
V•I Chip BCM,
and more
VI-200
MAXI
VI-J00
MINI
MICRO
Up to
2,200 W
BCM
VIPAC ARRAY
FlatPAC-EN
VI-200
VI-J00
1 – 4 Outputs using
VI-200, VI-J00 Series or
Maxi, Mini & Micro
Series Modules
90 – 132 Vac
180 – 264 Vac
250 – 380 Vdc
Up to
500 W
MAXI
(425 W for
EN compliance)
MINI
MICRO
MegaPAC Family
VI-200
1 – 20 Outputs using
VI-200, VI-J00 & Maxi
Series Modules
85 – 264 Vac
3ø 208/240 Vac
100 – 380 Vdc
Up to
4,000 W
VI-J00
MAXI
VIPAC Arrays
MAXI
1 – 4 Outputs using
Maxi, Mini & Micro
Series Modules
DC Inputs
24, 28, 48, 72, 110,
150, 300, 375 Vdc
Parallel for
High Power
Up to
750 W
MINI
MICRO
MegaMod Family
(Chassis Mount)
DC Inputs
10 – 400 Vdc
ComPAC Family
DC Inputs
24, 28, 48, 270,
300 Vdc
Front-end filtering optimized for communication and defense applications
1 – 3 Outputs using
VI-200 / MI-200 or
VI-J00 / MI-J00
Series Modules
1 – 3 Outputs using
VI-200 / MI-200
Series Modules
VI-J00/
MI-J00
VI-200 /
MI-200
VI-200 /
MI-200
Up to 300 W
Up to 600 W
Up to 600 W
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
3
V•I CHIP SOLUTIONS
48 V BCM™ Bus Converter
48 V PRM™ Regulator
VTM™ Voltage Transformer
page 5
page 7
page 6
MIL-COTS
Version
Available
Page 34
ZVS / ZCS isolated Sine
Amplitude Converter
48 Vin ZVS buck / boost regulator
48 Vin Sine Amplitude Converter
Input: 36 – 75 Vdc or 38 – 55 Vdc
26 – 55 Vdc input range
Provides 26 – 55 Vdc output
factorized bus for 48 Vin VTMs
0.8 – 55 Vdc outputs
Efficiency: Up to 97%
High density: Up to 345 A/in3
Up to 100 A or 300 W
Small footprint: Up to 90 A/in2
125ºC operation (Tj)
Low weight: 0.5 oz (15 g)
Isolation to 2,250 Vdc
<1 µs transient response
Low noise: No output filtering required
J-Lead package pick & place /
SMD compatible
Through-hole pin option
Input: 38 – 55 Vdc
Output: Eleven models, 1.5 to 48 V
Power: Up to 300 W (450 W for 1 ms)
Efficiency: Up to 97%
Efficiency: Up to 96.5%
High density: Up to 1,036 W/in3
(68 W/cm3)
High density: Up to 1,105 W/in3
(55 W/cm3)
Small footprint: 1.1 in2 (7.1 cm2)
Small footprint: 1.1 in2 (7.1 cm2)
125ºC operation (Tj)
125°C operation (Tj)
Low weight: 0.5 oz (15 g)
>3.5 million hours MTBF
Low noise: No output filtering required
J-Lead package pick & place /
SMD compatible
Through-hole pin option, full size
High Voltage BCM Bus Converter
Low weight: 0.5 oz (15 g)
J-Lead package pick & place /
SMD compatible
Through-hole pin option
24 V PRM Regulator
QPI for V•I Chips Input Filter Module
page 26
page 6
page 5
MIL-COTS
Version
Available
Page 34
ZVS / ZCS isolated Sine
Amplitude Converter
24 Vin ZVS buck / boost regulator
Support EN55022, Class B limits
Input: 18 – 36 Vdc
Compatible with 48 and 24 V V•I Chips
Provides 26 – 55 Vdc output
factorized bus for 48 Vin VTMs
Efficiency: >99%
Up to 65 dB CM attenuation at 1 MHz
Up to 80 dB DM attenuation at 1 MHz
7 A models, parallelable for up to 14 A
Hot-Swap models available
Supports AdvancedTCA® PICMG3.0
requirements
12,5 x 25 x 4,5 mm LGA package
25 x 25 x 4,5 mm package for
Hot-Swap models
330 – 365 Vdc to 11 Vdc @ 300 W
360 – 400 Vdc to 12 Vdc @ 300 W
Efficiency: Up to 97%
Efficiency: Up to 95%
High density: Up to 1,034 W/in3
Small footprint: 1.1 in2 (7.1 cm2)
High density: Up to 414 W/in3
(25 W/cm3)
125°C operation (Tj)
Isolation to 4,242 Vdc
>2.6 million hours MTBF
Low noise: No output filtering required
Low weight: 0.5 oz (15 g)
J-Lead package pick & place /
SMD compatible
Through-hole pin option
Small footprint: 1.1 in2 (7.1 cm2)
125ºC operation (Tj)
Low weight: 0.5 oz (15 g)
J-Lead package pick & place /
SMD compatible
Through-hole pin option
VI BRICK
Thermally enhanced packaging option
available for PRM, VTM, BCM, Page 8 – 10
Evaluation Boards Available
Page 46
BRICK SOLUTIONS
VI-200 / VI-J00 DC-DC Converter
Maxi / Mini / Micro DC-DC Converter
VI BRICK PRM / VTM / BCM
MIL-COTS Version
Available
page 12-13
MIL-COTS
Version
Available
Page 35
Page 34
Input voltage ranges: 10 – 400 Vdc
Output voltages: 1 – 95 Vdc
Output power (per module):
VI-200: 50 – 200 W • VI-J00: 25 – 100 W
Parallelable for higher power
100°C operation: 85°C for VI-200
Efficiency: Up to 90%
Agency approvals: CE Marked
cULus, cTÜVus
page 8-10
page 14-15
MIL-COTS
Version
Available
Page 35
Brick solution for Factorized Power
Thermally enhanced package –
baseplate and through-hole pin
Output power: 50 – 600 W
100°C, no derating
100˚C baseplate operation
High efficiency
Small footprint: 2.08 in2
Low-noise ZCS / ZVS
Low profile: 0.37 inches above board
Efficiency: Up to 97%
High power density: Up to 390 W/in3
VI BRICK DC-DC Converter
Input voltages: 24, 28, 48, 72, 110, 150,
300, 375 Vdc
High power density: Up to 120 W/in
3
QPI Family Active EMI Input Filters
QPO Family Active Output Ripple
Attenuators
page 27
page 26
page 11
QuietPower™
QuietPower™
Input range: 36 – 75 Vdc
Efficiency: Up to 93%
Output voltages: 1 – 48 V
Fast dynamic response
Low noise
Maximum case temperature:
100˚C, no derating
Up to 60 dB CM attenuation at 250 kHz
Up to 80 dB DM attenuation at 250 kHz
3 – 30 Vdc and 0.3 – 5.5 Vdc input models
Up to 14 A
Up to 20 A
Efficiency: >99% at full load
Supports precise point-of-load regulation
High density, low profile LGA package
Designed to support EN Class B
Reduces required number of output
capacitors to support dynamic loads
Integrated Hot-Swap in select models
Selectable optimization of attenuation,
power dissipation, transient load response
Compatible with most industry standard
DC-DC converters
ATCA®
Current rating supports
–40ºC to +100ºC PCB temperature
blades
Compatible with most industry standard
DC-DC converters
Input Filter Modules
Front-end Modules
>30 dB PARD attenuation, 1 kHz to 500 kHz
page 18-22
Output Filter Modules
page 25
page 24
MIL-COTS Version
Available
MIL-COTS Version
Available
MIL-COTS Version
Available
Page 35
Page 36
Page 36
Up to 1,000 W power output
24, 48 and 300 V models
5 – 50 V, Up to 20 A
85 – 264 Vac input
Efficiency: Up to 98%
3 – 30 V, Up to 30 A
Efficiency: 90 – 98%
Efficiency: Up to 98%
Agency approvals:
CE Marked, cTÜVus, cULus
Agency approvals:
CE Marked, cTÜVus, cULus
Up to 40 dB attenuation from 60 Hz to 1 MHz
Operating temperature:
–55°C to +100°C
Operating temperature:
–55°C to +100°C
Operating temperature: –55°C to +100°C
Inrush current limiting
Designed to meet EN Class B, Bellcore
and FCC transient and immunity
PICOR SOLUTIONS
Cool-ORing™ Series Controllers
Cool-ORing™ Series Full-Function
Solutions
page 16
Fast dynamic response
4 A gate discharge current
Accurate MOSFET voltage sensing
Overtemperature fault detection
Adjustable reverse current blanking timer
Withstands 100 V transients in low-side
applications
Master / Slave I/O for paralleling
Active low-fault flag output
Compatible with bricks and V•I Chips
page 17
Combines a high-speed ORing MOSFET controller
anda very low on-state resistance ORing MOSFET
Integrated high-performance MOSFET
PI2121: 8 V, 24 A, 1.5 mΩ
PI2122: 7 V, 12 A, 6 mΩ (back-to-back MOSFET)
PI2123: 15 V, 15 A, 3 mΩ
PI2125: 30 V, 12 A, 5.5 mΩ
Very small, high density optimized solution
Fast dynamic response
Accurate sensing capability
Compatible with bricks and V•I Chips
CONFIGURABLE POWER SUPPLIES
VIPAC AC-DC or DC-DC Power Solution
VIPAC Arrays DC Input Power System
FlatPAC AC-DC Power Solution
page 28
page 31
page 30
MIL-COTS
Version Available
Page 37
Input voltage ranges:
115/230 Vac, 28 Vdc (MIL-COTS)
Output voltages: 2 – 48 Vdc
Output power: Up to 900 W
Single, dual, or triple outputs
Efficiency: 80 – 90%
Local or remote control
Input voltages: 24, 300, Vdc
Output voltages: 2 – 54 Vdc
Output power: 50 – 650 W
ComPAC Input Power Solution
Array power: Up to 750 W
Single, dual, triple or quad outputs
Rugged, low profile, coldplate chassis
High-temperature capability
MegaMod Chassis-mount Converter
page 32
Input voltage:
115/230 Vac input, autoranging
Output voltages: 1 – 95 Vdc
Output power: 50 – 600 W
Single, dual, or triple outputs
Low-noise ZCS / ZVS power technology
Agency approvals:
CE Marked, cTÜVus, cULus
PFC FrontEnd 384 Vdc Output Front End
page 19
page 33
MIL-COTS Version
Available
MIL-COTS Version
Available
Page 37
Page 37
Input voltages:
24, 48 and 300 Vdc
Input voltage range:
10 – 400 Vdc
Input voltage ranges:
85 – 264 Vac and 100 – 380 Vdc
Output voltages: 1 – 95 Vdc
Output voltages: 1 – 95 Vdc
Output power: Up to 2,200 W
Efficiency: 80 – 90%
Output power: Up to 600 W
Up to 4 non-isolated outputs
Power density: Up to 10 W/in3
Single, dual, or triple outputs
Low-noise FM control
Efficiency: 80 – 90%
Operating temperature:
– 20°C to + 45°C (full power)
ZCS / ZVS power architecture
Low-noise ZCS power architecture
DIN rail mountable
CONFIGURABLE POWER SUPPLIES
PFC FlatPAC Single-Output Power System
LoPAC Family Switcher Power Supplies
page 29
MegaPAC Family User-Configured
page 40
page 38
Input voltage range:
85 – 264 Vac
Input voltage ranges:
85 – 264 Vac and 100 – 380 Vdc
Input voltage ranges:
85 – 264 Vac and 100 – 380 Vdc
Output power: Up to 575 W
2 – 54 Vdc
Output voltages: 2 – 95 Vdc (higher
voltage available with series arrays)
Output voltage: 2 – 95 Vdc (higher
voltage available with series arrays)
High efficiency
Output power: 25 – 1,500 W
Output power: 25 – 4,000 W
Current limit
Up to 6 user-specifiable outputs
Up to 20 outputs
Remote sense
High power density
FlatPAC-EN AC-DC Power Solution
Power density: Up to 11
W/in3
DC MegaPAC™ Power Switcher
page 45
page 39
Input voltage ranges:
90 – 132 / 180 – 264 Vac
250 – 380 Vdc
Output voltages: 2 – 95 Vdc
Output power: Up to 500 W
Up to 4 user-specifiable outputs
Javelin™ MIL-COTS Power Supply
Input voltage ranges: 85 – 254 Vac
(PFC) / 85 – 380 Vdc
Output voltages: Single output 2, 3.3,
5, 12, 15, 24, 28, 48 Vdc
Output power: 600 – 5,400 W
page 45
Input voltage range: 12 – 72 Vdc
Vin max range: 18 – 36 Vdc
Output voltages: 2 – 95 Vdc
Input power: 650 W
Output power: Up to 1,600 W
Output power: 550 W
Up to 16 outputs
Temperature: –40 to +85ºC
Low profile: 0.670 in. max. height
Utilizes Vicor’s V•I Chips
PowerBank™ Low Profile Supply
page 44
VME450™ Single-slot Power Supply
Badger™ MIL-COTS Power Supply
page 44
page 44
Input voltage: 115/230 Vac
Output voltages: 1.8 – 52 V
Output power: 1000 W @ 230 Vac input,
800 W @ 115 Vac input
Operating temperature: –20°C to +50°C
CUSTOM SOLUTIONS
Don’t see what you need...
Vicor Custom Power can design and manufacture a power supply built to your
unique specifications. We specialize in turnkey custom power systems for
electronic equipment manufacturers in the datacom, telecom, industrial, test
equipment, medical, information technology, and MIL-COTS markets.
Utilizing Vicor component power modules in a building-block design approach
offers low cost, quick turnaround, and reliable performance.
For more information on custom solutions, see pages 42 – 43.
Input voltage ranges: 85 – 264 Vac and
100 – 380 Vdc
Output power: Up to 1,800 W
Up to 12 non-isolated outputs
Operating temperature: – 55°C to + 65°C
DC-DC
V•I Chip
Web ExpressCode: vichip
The V•I Chip™ Advantage Density, Efficiency, Flexibility, & Speed
RoHS
Vicor’s V•I Chips, new families of integrated power components, give the
power architect new ways to create small, cost-effective, high-performance
power system solutions.
V•I Chips increase power system flexibility by separating or factorizing a
DC-DC converter into two components. One component provides a
regulation function (PRM ), and another provides transformation and
isolation (VTM / BCM ). This allows the power system designer to select
only the functions that are needed, where they are needed.
™
™
™
Transformation & Isolation
Regulation
BCM
VTM
PRM
Shown at actual size.
N
N
N
P
N
P
S
L
Regulator
Voltage Transformer
VI BRICKs
S
PRM, VTM, BCM models available
Baseplate with through-hole pins
Page 8 – 10
Bus Converter
DC-DC Conversion Using PRM & VTM
System solution with low component count
Bus Conversion Using BCMs
Enable dense IBA Power Systems
VTM isolation and transformation at the point of load
High density bus converter > 1,000 W/in3
PRM regulation can be collocated with or remote from the VTM
Efficiency: Up to 96.5%
Efficiency: Up to 93%
Minimize total system capacitance
High power density: Up to 517 W/in
3
niPOL
LOAD
1/4 the capacitance volume here...
L
niPOL
PRM
VTM
LOAD
BCM
L
SOURCE
N
P
LOAD
N
S
SOURCE
N
N
P
S
niPOL
L
LOAD
L
niPOL
LOAD
L
...little or no capacitance needed here.
High Current Low Voltage Supply
Enable twice the current in half the space
Up to 295 W or 200 A
High Voltage Outputs
VTM
N
P
VTM
PRM
SOURCE
N
S
High Power Arrays
Put VTM stages in series to achieve
output voltages greater than 55 V
N
P
N
P
S
LOAD
VTM
VTM
L
N
P
N
S
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
S
N
P
LOAD
SOURCE
VTM
PRM
N
N
P
S
L
4
N
L
LOAD
SOURCE
VTM
PRM
N
L
PRM
Parallel PRMs and VTMs to
create multi-kW power systems
N
S
DC-DC
V•I Chip
Web ExpressCode: bcm
BCM™ Bus Converter Module
RoHS
The BCM is a member of the new family of V•I Chips. It provides an isolated
intermediate bus voltage to power non-isolated POL converters from a narrow
range DC input, or it can be used as an independent DC source. The BCM offers
superior performance and lower cost than conventional bus converters. BCMs are
available in standard 48 V telecom as well as in high-voltage offline input ranges.
Due to the fast response time and low noise of the BCM, the need for limited life
aluminum electrolytic or tantalum capacitors at the load is reduced – or
eliminated – resulting in savings of board area, materials, and total system cost.
Features
Fixed-ratio bus converter
Output power: Up to 330 W
Available in 48, 352, and 384 V inputs
Small footprint: 1.1in2 (7.1 cm2)
High density: Up to 1,100 W/in3
Pick & place / SMD compatible
Isolation to 4,242 Vdc
Through-hole pin option
Efficiency: Up to 96.5%
125°C operation (Tj)
Heat Sinks
Available
MIL-COTS Version
Available
>3.5 million hours MTBF
Page 48
Page 34
VI BRICK
BCM model Page 10
Part Numbering
For a complete listing of our BCM model numbers, go to vicorpower.com/vichip
B
Bus Converter
Module
0 4 8
Input Voltage
Designator
VI
Branding
V•I Chip
Input Voltage
38 – 55 Vdc
[b] Vin
B
FPA Family
B = Bus
Converter
Module
K Factor
1/32
1/16
1/12
1/8
1/6
1/5
1/4
1/4
1/3
1/2
2/3
1
Configuration
F = J-Lead
T = Through hole
F
1 2 0
Output Voltage
Designator
( = Vout X10 )
Temperatures
Storage
T – 40 to 125°C
M –65 to 125°C
Operating (Tj)
–40 to 125°C
–55 to 125°C
T
Product Grade
Storage (Tst)
Reference Only T – 40 to 125°C
M –65 to 125°C
1.19
2.38
3.17
4.75
6.34
7.60
9.50
9.50
12.70
19.00
25.30
38.00
F
Temperatures
Operating (Tj)
–40 to 125°C
–55 to 125°C
Vout
@ 48 Vin
1.5 Vdc
3.0 Vdc
4.0 Vdc
6.0 Vdc
8.0 Vdc
9.6 Vdc
12.0 Vdc
12.0 Vdc
16.0 Vdc
24.0 Vdc
32.0 Vdc
48.0 Vdc
3 0
Product Grade
x x x x
Product
Reference
T
Range
– 1.71 Vdc
– 3.43 Vdc
– 4.58 Vdc
– 6.87 Vdc
– 9.16 Vdc
– 11.00 Vdc
– 13.75 Vdc
– 13.80 Vdc
– 18.30 Vdc
– 26.50 Vdc [b]
– 36.70 Vdc
– 55.00 Vdc
Output Power
Designator
( = POUT /10 )
J
Package Size
F = Full
H = Half
Leadform
J = J-Lead (SMT)
T= Through Hole
Max Power
Pack Size
BCM Model No.
135 W
210 W
200 W
240 W
240 W
240 W
120 W
300 W
240 W
300 W
300 W
300 W
Full
Full
Full
Full
Full
Full
Half
Full
Full
Full
Full
Full
B048F015T14
B048F030T21
B048F040T20
B048F060T24
B048F080T24
B048F096T24
VIB0101THJ
B048F120T30
B048F160T24
B048F240T30
B048F320T30
B048F480T30
Max Power
Pack Size
BCM Model No.
300 W
300 W
325 W
325 W
Full
Full
Full
Full
B384F120T30
VIB0001TFJ
VIB0002TFJ
VIB0003TFJ
= 38 – 53 Vdc
Input Voltage
K Factor
360 – 400 Vdc
330 – 365 Vdc
360 – 400 Vdc
330 – 365 Vdc
1/32
1/32
1/8
1/8
Vout
@ Nom. Vin
12.0 Vdc
11.0 Vdc
48.0 Vdc
44.0 Vdc
Range
11.30 – 12.50 Vdc
10.30 – 11.40 Vdc
45.00 – 50.00 Vdc
41.25 – 45.63 Vdc
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
5
DC-DC
V•I Chip
Web ExpressCode: prm
PRM™ Regulator
RoHS
The PRM is a high-efficiency, non-isolated regulator capable of both
boosting and bucking a wide-range input voltage. PRMs may be used
independently, as stand-alone regulators, or together with downstream
V•I Chip VTMs™ — fast, efficient, isolated low-noise point-of-load (POL)
converters.
PRMs feature unique "Adaptive Loop" compensation feedback: a single-wire
alternative to traditional remote sensing and feedback loops that enables
precise control of an isolated POL voltage without the need for either a
direct connection to the POL or for noise sensitive, bandwidth limiting,
isolation devices in the feedback path.
VI BRICK
PRM model Page 8
Features
ZVS buck / boost regulator
Small footprint: 1.1in2 (7.1 cm2)
MIL-COTS Version
Available
Provides factorized bus for 48 Vin VTMs
125ºC operation (Tj)
Page 34
Available in 24, 36 and 48 V models
J-Lead package
Efficiency: Up to 97%
Through-hole pin option
High density: Up to 1,105 W/in3
Pick & place / SMD compatible
Heat Sinks Available
Page 48
Part Numbering For a complete listing of our PRM model numbers, go to vicorpower.com/vichip
P
Pre-Regulator
Module
0 4 8
Input Voltage
Designator
F
0 4 8
Configuration Nominal Factorized
Bus Voltage
F = J-Lead
T = Through Hole
T
Product Grade
Temperatures
Storage
T – 40 to 125°C
M –65 to 125°C
Operating (Tj)
– 40 to 125°C
–55 to 125°C
Max Output
Input Voltage
Power
240 W
120 W
320 W
170 W
120 W
120 W
36 – 75 Vdc
38 – 55 Vdc
18 – 36 Vdc
18 – 60 Vdc
2 4
Current
5.0 A
2.5 A
6.6 A
3.5 A
2.5 A
2.5 A
A L
Output Power
Designator
( = Pf/10 )
Adaptive Loop
PRM Model No.
Trim / Vf Range
P048F048T24AL
P048F048T12AL
P045F048T32AL
P045F048T17AL
P024F048T12AL
P036F048T12AL
26 – 55 V
Note: See individual data sheets for additional model specifications and configurations.
Application Examples
Vo = VL ± 1.0%
VC
PC
TM
IL
NC
PR
PRM-AL
+In
VH
SC
SG
OS
NC
CD
VC
PC
TM
IL
NC
PR
+Out
+In
Vout
Vin
–In
–Out
Regulator
6
PRM-AL
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
VH
SC
SG
OS
NC
CD
Factorized
Bus (Vf)
ROS
RCD
+Out
Vf =
Vin
–In
–Out
VL (Io•Ro)
+
K
K
DC-DC Converter
+Out
+In
TM
VC
PC
-In
VTM
-Out
+Out
K
Ro
-Out
L
O
A
D
DC-DC
V•I Chip
Web ExpressCode: vtm
VTM™ Voltage Transformer
RoHS
The VTM provides an isolated voltage to the point of load. Utilizing a Sine
Amplitude Converter (SAC), it offers unprecedented performance in the
critical areas of speed, noise, efficiency and density. VTMs address output
requirements from 0.8 – 55 Vdc at up to 100 A, all in a surface-mount
package only one-quarter of a cubic inch in volume. VTMs operate over
an input voltage range of 26 – 55 Vdc — the "factorized bus"— and are
a fixed-ratio device that requires a PRM or other stabilized voltage source
for regulation.
Features
Fixed ratio DC-DC converter
125°C operation (Tj)
Output: Up to 100 A / 300 W
1 µs transient response
High density: Up to 345 A/in3
>3.5 million hours MTBF
Small footprint: 1.1in2 (7.1 cm2)
J-Lead package
Low weight: 0.5 oz (15 g)
Through-hole pin option
Pick & place / SMD compatible
Isolation to 2,250 Vdc
Efficiency: Up to 97%
VI BRICK
VTM model Page 9
Heat Sinks
Available
MIL-COTS Version
Available
Page 48
Page 34
Part Numbering For a complete listing of our VTM model numbers, go to vicorpower.com/vichip
V
0 4 8
F
Voltage
Input Voltage Configuration
F = J-Lead
Transformation
Designator
T = Through Hole
Module
Input Voltage
26 – 55 Vdc
[a]
[b]
K Factor
1/32
1/24
1/16
1/12
1/8
1/6
1/5
1/4
1/3
1/2
2/3
1
1 2 0
Output Voltage
Designator
( = Vout X10 )
T
Product Grade
Temperatures
Storage
T – 40 to 125°C
M –65 to 125°C
Operating (Tj)
–40 to 125°C
–55 to 125°C
Vout
@ 48 Vin
1.5 Vdc
2.0 Vdc
3.0 Vdc
4.0 Vdc
6.0 Vdc
8.0 Vdc
9.6 Vdc
12.0 Vdc
16.0 Vdc
24.0 Vdc
32.0 Vdc
48.0 Vdc
Range
0.82 – 1.71 Vdc
1.09 – 2.29 Vdc
1.63 – 3.43 Vdc
2.17 – 4.58 Vdc
3.25 – 6.87 Vdc
4.34 – 9.16 Vdc
6.40 – 11.00 Vdc
6.50 – 13.80 Vdc
8.67 – 18.30 Vdc
13.80 – 26.50 Vdc
17.30 – 36.70 Vdc
26.00 – 55.00 Vdc
0 2 5
Output Current
Designator
( = Iout )
Output Current
100 A
80 A
70 A
50 A
40 A
30 A
25 A
25 A
15 A
12 A
9A
6A
VTM Model No.
V048F015T100
V048F020T080
V048F030T070
V048F040T050
V048F060T040
V048F080T030
V048F096T025 [a]
V048F120T025
V048F160T015
V048F240T012 [b]
V048F320T009
V048F480T006
Vout = 6.4 Vdc @ 32 Vin
Vout = 14.0 Vdc @ 28 Vin
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
7
DC-DC
VI BRICKs
Web ExpressCode: vibprm
VI BRICK PRM Thermally Enhanced Package
RoHS
The VI BRICK PRM is a very efficient non-isolated regulator designed to
provide a controlled Factorized Bus distribution voltage for powering
downstream VI BRICK or V•I Chip Voltage Transformation Modules. In
combination, VI BRICK PRMs and VTMs form a complete DC-DC Converter
subsystem offering all of the unique benefits of Vicor’s Factorized Power
Architecture (FPA): high density and efficiency; low noise operation;
architectural flexibility; extremely fast transient response; elimination of
bulk capacitance at the point of load (POL); in a brick style package.
Features
100°C baseplate operation
Efficiency: Up to 97%
MIL-COTS Version
Available
Input voltages: 24, 36, 45 and 48 Vdc
Fast transient response
Page 34
Low profile: 0.37 in. (9.5 mm)
Low noise operation
Low weight: 1.07 oz (30.3 g)
Rugged robust package
Lead free wave solder compatible
Agency approvals
in2
Small footprint: 2.08
ZVS buck-boost regulator
Part Numbering Ordering, see back cover for contacts
P R
Pre-Regulator
Module
0 4 8
Input Voltage
Designator
A
4 8 0
Output Voltage
Designator
Package Size
( = VOUT X 10 )
[a] Contact
0 2 4
Product Grade
Temperatures
Storage
T – 40 to 125°C
M –65 to 125°C
Operating
– 40 to 100°C
–55 to 100°C
Output Power
Designator
( = POUT / 10 )
F
P
Baseplate
Pin Style
F = Slotted flange
P = Pin-fin heat sink [a]
P = Through hole
factory
Max Output
Input Voltage
Power
240 W
120 W
320 W
170 W
120 W
120 W
36 – 75 Vdc
38 – 55 Vdc
18 – 36 Vdc
18 – 60 Vdc
Current
5.0 A
2.5 A
6.6 A
3.5 A
2.5 A
2.5 A
Note: See individual data sheets for additional model specifications and configurations.
Regulation
DC Source
8
T
PRM
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
PRM Model No.
Trim / Vf Range
PR048A480T024FP
PR048A480T012FP
PR045A480T032FP
PR045A480T017FP
PR024A480T012FP
PR036A480T012FP
26 – 55 V
DC-DC
VI BRICKs
Web ExpressCode: vibvtm
VI BRICK VTM Thermally Enhanced Package
RoHS
The VI BRICK VTM current multiplier excels at speed, density and efficiency
to meet the demands of advanced power applications. Combined with the
VI BRICK or V•I Chip PRM regulator the VI BRICK VTM creates a DC-DC
converter with flexibility to provide isolation and regulation where needed.
The PRM can be located with the VTM at the point of load or remotely in
the back plane or on a daughtercard.
Features
100°C baseplate operation
ZVS / ZCS isolated sine amplitude converter
Up to 100 A or 300 W
Efficiency: Up to 97%
High density: Up to 390 W/in3
<1 µs transient response
Small footprint: 2.08 in2
Isolated output
Low profile: 0.37 in. (9.5 mm)
No output filtering required
Low weight: 1.10 oz (31.3 g)
Lead free wave solder compatible
Agency approvals
MIL-COTS Version
Available
Page 34
Part Numbering Ordering, see back cover for contacts
V T
0 4 8
Voltage
Input Voltage
Transformation Designator
Module
[a] Contact
Package Size
A
1 2 0
Output Voltage
Designator
( = VOUT X 10 )
T
0 2 5
Product Grade
Temperatures
Storage
T – 40 to 125°C
M –65 to 125ºC
Operating
– 40 to 100°C
–55 to 100ºC
Output Current
Designator
( = lout )
F
P
Baseplate
Pin Style
F = Slotted flange
P = Pin-fin heat sink [a]
P = Through hole
factory
Input Voltage
26 – 55 Vdc
K Factor
1/32
1/24
1/16
1/12
1/8
1/6
1/5
1/4
1/3
1/2
2/3
1
Vout
@ 48 Vin
1.5 Vdc
2.0 Vdc
3.0 Vdc
4.0 Vdc
6.0 Vdc
8.0 Vdc
9.6 Vdc
12.0 Vdc
16.0 Vdc
24.0 Vdc
32.0 Vdc
48.0 Vdc
Output Current
Range
0.82 – 1.71 Vdc
1.09 – 2.29 Vdc
1.63 – 3.43 Vdc
2.17 – 4.58 Vdc
3.25 – 6.87 Vdc
4.34 – 9.16 Vdc
6.40 – 11.00 Vdc
6.50 – 13.80 Vdc
8.67 – 18.30 Vdc
13.80 – 26.50 Vdc
17.30 – 36.70 Vdc
26.00 – 55.00 Vdc
100 A
80 A
70 A
50 A
40 A
30 A
25 A
25 A
15 A
12 A
9A
6A
VTM Model No.
VT048A015T100FP
VT048A020T080FP
VT048A030T070FP
VT048A040T050FP
VT048A060T040FP
VT048A080T030FP
VT048A096T025FP [b]
VT048A120T025FP
VT048A160T015FP
VT048A240T012FP [c]
VT048A320T009FP
VT048A480T006FP
Note: See individual data sheets for additional model specifications and configurations.
Vout = 6.4 Vdc @ 32 Vin [c] Vout = 14.0 Vdc @ 28 Vin
[b]
Transformation / Isolation
Output 1
VTM
Load
Output 2
Load
VTM
Output 3
VTM
Load
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
9
DC-DC
VI BRICKs
Web ExpressCode: vibbcm
VI BRICK BCM Thermally Enhanced Package
RoHS
VI BRICK BCM modules use advanced Sine Amplitude ConverterTM (SAC)
technology, thermally enhanced packaging technologies, and advanced
manufacturing processes to provide high power density and efficiency,
superior transient response, and improved thermal management. These
modules can be used to provide an isolated intermediate bus to power
non-isolated POL converters and due to the fast response time and low
noise of the BCM, capacitance can be reduced or eliminated near the load.
Features
100°C baseplate operation
Isolated output
48 V, 352, and 384 V Bus Converters
No output filtering required
High density: Up to 390 W/in3
<1 µs transient response
Fast transient response
in2
Small footprint: 2.08
Height above board: 0.37 in (9.5 mm)
Lead free wave solder compatible
Efficiency: Up to 96%
Agency approvals
Part Numbering Ordering, see back cover for contacts
B C
0 4 8
Bus Converter Input Voltage
Module
Designator
A
Package Size
0 1 5
Output Voltage
Designator
( = VOUT X 10 )
[a] Contact
T
0 1 4
Product Grade
Temperatures
Storage
T – 40 to 125°C
M –65 to 125°C
Operating
– 40 to 100°C
–55 to 100°C
Output Power
Designator
( = POUT / 10 )
F
Baseplate
Pin Style
F = Slotted flange
P = Pin-fin heat sink [a]
P = Through hole
factory
Input Voltage
Vout
K Factor
@ 48 Vin
1.5 Vdc
3.0 Vdc
4.0 Vdc
6.0 Vdc
8.0 Vdc
9.6 Vdc
12.0 Vdc
16.0 Vdc
24.0 Vdc
32.0 Vdc
48.0 Vdc
11.0 Vdc
11.0 Vdc
12.0 Vdc
1/32
1/16
1/12
1/8
1/6
1/5
1/4
1/3
1/2
2/3
1
1/32
1/32
1/32
38 – 55 Vdc
330 – 365 Vdc
330 – 365 Vdc
360 – 400 Vdc
Range
1.19 – 1.71 Vdc
2.38 – 3.43 Vdc
3.17 – 4.58 Vdc
4.75 – 6.87 Vdc
6.34 – 9.16 Vdc
7.60 – 11.00 Vdc
9.50 – 13.80 Vdc
12.70 – 18.30 Vdc
19.00 – 26.50 Vdc [b]
25.30 – 36.70 Vdc
38.00 – 55.00 Vdc
10.3 – 11.4 Vdc
10.3 – 11.4 Vdc
11.3 – 12.5 Vdc
Max Power
BCM Model No.
135 W
210 W
200 W
240 W
240 W
240 W
300 W
240 W
300 W
300 W
300 W
240 W
300 W
300 W
BC048A015T014FP
BC048A030T021FP
BC048A040T020FP
BC048A060T024FP
BC048A080T024FP
BC048A096T024FP
BC048A120T030FP
BC048A160T024FP
BC048A240T030FP
BC048A320T030FP
BC048A480T030FP
BC352A110T024FP
BC352A110T030FP
BC384A120T030FP
Note: See individual data sheets for additional model specifications and configurations.
[b] Vin = 38 – 53 Vdc
Typical Application
F1
POL
+IN
+OUT
+
POL
C1
enable / disable
switch
SW1
–
-OUT
TM
RSV
PC
Vin
R2
2 kΩ
BCM
POL
POL
-IN
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
Vout
+OUT
D1
(power good indicator)
10
P
-OUT
DC-DC
VI BRICKs
Web ExpressCode: vibdcdc
VI BRICK DC-DC Converter
RoHS
VI BRICK DC-DC converters use advanced Sine Amplitude Converter (SAC)
technology, thermally enhanced packaging technologies, and advanced CIM
processes to provide high power density and efficiency, superior transient
response, and improved thermal management. The high speed 3.5 MHz,
zero-current switching / zero-voltage switching (ZCS / ZVS) design enables
efficient and low noise operation throughout the entire operating range.
Features
DC input range: 36 – 75 V
Highly efficient: ZCS / ZVS switching
Efficiency: Up to 93%
Fast dynamic response
DC output: 1 – 48 V
Low profile: 0.37 in. (9.5 mm)
Maximum operating temp: 100°C, full load
Power density: Up to 145 W/in3
Isolated output
Lead free wave solder compatible
Low noise: Sine Amplitude
Converter (SAC) technology
Agency approvals
Part Numbering Ordering, see back cover for contacts
D C
DC-DC
Converter
Module
[a] Contact
0 4 8
Input Voltage
Designator
B
Package Size
Output Voltage
Designator
( = VOUT X 10 )
0 5 0
T
0 1 8
Product Grade
Temperatures
Storage
T – 40 to 125°C
M –65 to 125°C
Operating
– 40 to 100°C
–55 to 100°C
F
Output Power
Designator
( = POUT / 10 )
P
Baseplate
Pin Style
F = Slotted flange
P = Pin-fin heat sink [a]
P = Through hole
factory
Output Voltage
Output Power (W)
Current (A)
Efficiency (%)
Part Numbering
1.0 Vdc
100
100
85
DC048B010T010FP
1.5 Vdc
120
80
87
DC048B015T012FP
1.8 Vdc
144
80
89
DC048B018T014FP
2.5 Vdc
175
70
90
DC048B025T017FP
3.0 Vdc
180
60
91
DC048B030T018FP
3.3 Vdc
165
50
91
DC048B033T016FP
5 Vdc
180
36
91
DC048B050T018FP
10 Vdc
180
18
92
DC048B100T018FP
12 Vdc
220
18.33
92
DC048B120T022FP
15 vdc
200
13.33
92
DC048B150T020FP
24 Vdc
220
9.17
92
DC048B240T022FP
28 Vdc
190
6.79
92
DC048B280T019FP
48 Vdc
220
4.58
93
DC048B480T022FP
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
11
DC-DC
BRICKs
Web ExpressCode: bricks1
VI-200 & VI-J00 Series Converter Modules
RoHS
VI-200 and VI-J00 converters feature wide input voltage ranges, remote
sense, enhanced output programmability, logic disable, and low quiescent
current. VI-200 product series feature output overvoltage protection and
thermal shut down. VI-J00 product series, at half the size of VI-200
converters, operate to 100˚C. Both product series are safety agency
approved, accelerating your time to market.
Features
Input voltage range: 10 – 400 Vdc
Output voltages: 1 – 95 Vdc
Output power (per module):
VI-200 Series: 50 – 200 W • VI-J00 Series: 25 – 100 W
Parallelable for higher power (VI-200)
3,000 Vrms isolation
100°C operation: (85°C for VI-200 Series)
Output voltage trim range: 50 – 110%
Efficiency: Up to 90%
Agency approvals: cULus, cTÜVus, CE Marked
Dimensions:
VI-200 Series: 4.6" x 2.4" x 0.5"
(116,9 x 61,0 x 12,7 mm)
MIL-COTS Version
Available
VI-J00 Series: 2.28" x 2.4" x 0.5"
(57,9 x 61,0 x 12,7 mm)
Page 35
Weight:
VI-200 Series: 6.0 oz / 170 g
VI-J00 Series: 3.0 oz / 85 g
Low-noise ZCS / ZVS
power architecture
4 temperature grades
Battery Charging &
Packaging Options
Page 23
General Performance Refer to data sheet for detailed specifications
Parameter
C-, I-, M-Grade
Input voltage and output voltage
See chart on page 13
Set point accuracy
0.5%
1.0%
Load / line regulation (max)
0.2%
0.5%
Output temperature drift
0.01%/°C
0.02%/°C
Peak-to-peak output ripple (max)
1.5%
3%
Trim range
[a]
E-Grade
50 – 110%
50 – 110%
Total remote sense compensation
0.5 V
0.5 V
OVP set point (VI-200 Series only)
125%
125%
Current limit
105 – 125%
105 – 135%
Efficiency (output ≥5 V)
80 – 90%
78 – 88%
Power sharing accuracy (VI-200 Series only)
±5%
±5%
Input reflected ripple current
10%
10%
No-load power dissipation
1.35 W
1.35 W
Isolation
Input to output
3,000 Vrms
3,000 Vrms
Input to baseplate
1,500 Vrms
1,500 Vrms
Output to baseplate
500 Vrms
500 Vrms
85°C ( 100°C )
85°C ( 100°C )
Max. baseplate temperature: VI-200 Series (VI-J00 Series)
[a] 10 V, 12 V and 15 V outputs, standard trim range ±10-%. Consult factory for wider trim range.
95 V outputs cannot be trimmed up.
Visit
vicorpower.com
& get your
Design Guide
12
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
DC-DC
BRICKs
Web ExpressCode: prodselect
Part Number Configuration Chart VI-200 & VI-J00
IMPORTANT NOTICE: PLEASE READ BEFORE STARTING
Configure Your BRICK Online
The part numbering format below is for Vicor VI-200 and VI-J00 DC-DC
converters and configurables. The power levels shown are the maximum
available for every input and output voltage combination. If you need
more power than a VI-200 (“driver”), add parallel “booster” modules
(of the same power level). For lower power versions use PowerBench at
vicorpower.com.
V I
-
PO
ERBENCH
vicorpower.com/powerbench
J
6
1
Family
Series
Input
Output
VI Non-RoHS
2 200
0 12 V
N 48 V
Z 2V
M 10 V
K 40 V
E
VE RoHS
J J00
V 24 V
4 72 V
Y 3.3 V
1 12 V
4 48 V
C –25°C
B Booster
-
C
W
Grade
Output Power
I
≥5V
–10°C
U 200 W
<5V
U 40 A
1 24 V
T 110 V
0 5V
P 13.8 V
H 52 V
W 24 V
5 150 V
X 5.2 V
2 15 V
F 72 V
– 40°C
V 150 W
V 30 A
M –55°C
W 100 W
W 20 A
2 36 V
6 300 V
W 5.5 V
N 18.5 V
D 85 V
X 75 W
X 15 A
3 48 V
7 150/300 V
V 5.8 V
3 24 V
B 95 V
Y 50 W
Y 10 A
T 6.5 V
L 28 V
Z 25 W
Z 5A
R 7.5 V
J 36 V
Designators VI-200 & VI-J00 Family and Accessory Modules
Maximum Power available for VI-2(B)xx-xx
Vin
Designator
Input
Voltage
2
Z
3.3
Y
5
0
Output Voltages
5.2 5.5 5.8 6.5 7.5 10 12 13.8 15 18.5 24 28 36 40 48 52 72 85 95
X W V
T R M 1 P 2 N 3 L
J
K 4 H F D B
0
V
1
W
2
3
N
4
T
5
7
6
12 (10-20)
24 (10-36)
24 (21-32)
24 (18-36)
36 (21-56)
48 (42-60)
48 (36-76)
72 (55-100)
110 (66-160)
150 (100-200)
150 (100-375)
300 (200-400)
X
-U
V
W
U
V
U
V
U
W
U
X
X
U
V
V
U
U
U
V
U
W
U
X
Y
U
V
W
U
U
U
V
V
Y
U
X
Y
U
V
W
U
U
U
V
V
Y
U
X X
Y Y
U U
V V
W W
U U
U U
U U
V V
V V
Y Y
U U
X
Y
V
W
W
U
U
V
W
V
W
V
X
X
V
W
W
U
U
V
W
V
W
V
X X
X X
U U
V V
W W
U U
U U
U U
V V
U U
W W
U U
X
X
U
V
W
U
U
U
V
U
W
U
X
X
U
V
W
U
U
U
V
U
W
U
X X
X X
U U
V V
W W
U U
U U
U U
V V
U U
W W
U U
X
X
U
V
W
U
U
U
V
U
W
U
X
X
U
V
W
U
U
U
V
U
W
U
X
X
U
V
W
U
U
U
V
U
W
U
X
X
U
V
W
U
U
U
V
U
W
U
X
-U
V
W
U
U
U
V
U
W
U
X
-U
V
-U
U
U
V
U
-U
X
-U
V
-U
U
U
-U
-U
X
-U
V
-U
U
U
-U
-U
Maximum Power available for VI-Jxx-xx
Vin
Designator
Input
Voltage
2
Z
3.3
Y
5
0
Output Voltages
5.2 5.5 5.8 6.5 7.5 10 12 13.8 15 18.5 24 28 36 40 48 52 72 85 95
X W V
T R M 1 P 2 N 3 L
J
K 4 H F D B
0
V
1
W
2
3
N
4
T
5
7
6
12 (10-20)
24 (10-36)
24 (21-32)
24 (18-36)
36 (21-56)
48 (42-60)
48 (36-76)
72 (55-100)
110 (66-160)
150 (100-200)
150 (100-375)
300 (200-400)
X
-W
W
Y
W
W
W
W
W
Y
W
X
Y
W
W
Y
W
W
W
W
W
Y
W
Y
Y
W
W
Y
W
X
W
X
W
Y
W
Y
Y
W
W
Y
W
X
W
X
W
Y
W
Y
Y
W
W
Y
W
X
W
X
W
Y
W
Y
Y
W
W
Y
W
X
W
X
W
Y
W
Y
Y
X
X
Y
X
X
X
X
X
Y
X
Y
Y
X
X
Y
X
X
X
X
X
Y
X
X
Y
W
W
X
W
W
W
W
W
X
W
X
Y
W
W
X
W
W
W
W
W
X
W
X
Y
W
W
X
W
W
W
W
W
X
W
X
Y
W
W
X
W
W
W
W
W
X
W
X
Y
W
W
X
W
W
W
W
W
X
W
X
Y
W
W
X
W
W
W
W
W
X
W
X
Y
W
W
X
W
W
W
W
W
X
W
X
Y
W
W
X
W
W
W
W
W
X
W
X
Y
W
W
X
W
W
W
W
W
X
W
X
Y
W
W
X
W
W
W
W
W
X
W
X
-W
W
X
W
W
W
W
W
X
W
X
-W
W
-W
W
W
W
W
-W
X
-W
W
-W
W
W
-W
-W
X
-W
W
-W
W
W
-W
-W
Note: See Design Guide & Applications Manual for VI-200 & VI-J00 Family, DC-DC Converters & Configurable Power Supplies
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
13
DC-DC
BRICKs
Web ExpressCode: bricks2
Maxi, Mini, Micro Series Converter Modules
RoHS
Maxi, Mini, Micro Series DC-DC converter modules use advanced power
processing, control, and packaging technologies to provide the performance,
flexibility, and cost effectiveness expected of a mature power component.
High-frequency ZCS / ZVS switching, advanced power semiconductor
packaging, and thermal management provide high power density with
low noise and high efficiency.
Features
24 V input: 18 – 36 Vdc
28 V input: 10 – 36 Vdc
48 V input: 36 – 75 Vdc
72 V input: 43 – 110 Vdc
110 V input: 66 – 154 Vdc
150 V input: 100 – 200 Vdc
300 V input: 180 – 375 Vdc
375 V input: 250 – 425 Vdc
100°C, no derating
High efficiency
Low-noise ZCS / ZVS
Up to 120 W/in3
3,000 Vac isolation
Single-wire paralleling
Input undervoltage lockout
Output overvoltage protection
Overtemperature shut down
Module fault alarm
ZCS / ZVS power architecture
Module Mounting &
Interconnect Options
MIL-COTS Version
Available
Output voltage trim: 10 – 110%
Page 50
Page 35
Bias supply to power
external circuitry
Logic enable / disable
5 temperature grades
Configure Your BRICK Online
PO
ERBENCH
vicorpower.com/powerbench
General Performance Refer to data sheet for detailed specifications
Parameter
Specifications
Notes
Set point accuracy
±1% Vout nom.
Nominal input; full load; 25°C
Line regulation
±0.02% Vout nom.
Low line to high line; full load
Load regulation
±0.02% Vout nom.
No load to full load; nominal input
Temperature regulation
±0.002% Vout/°C
–20 to 100°C (C-Grade)
Remote sense compensation
0.5 V
Maxi and Mini only
Overvoltage set point
115% Vout nom.
Current limit
115% Iout typ.
Short-circuit current
115% Iout typ.
Output voltage <250 mV
Efficiency
Up to 90%
Nominal input; 80% load; 25°C
Programming range
10 – 110% Vout nom.
Isolation voltage
3,000 Vrms
Input to output
Dimensions
Maxi full-brick
4.6" x 2.2" x 0.5" (117 x 55,9 x 12,7 mm)
Up to 600 W
Vout 95% of nominal
Mini half-brick
2.28" x 2.2" x 0.5" (57,9 x 55,9 x 12,7 mm)
Up to 300 W
Micro quarter-brick
2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm)
Up to 150 W
Agency approvals
cULus, cTÜVus, CE Marked
Design Guide & Applications Manual Maxi, Mini, Micro Family DC-DC Converters & Accessory Modules
14
High density DC-DC converter technology
Filter / autoranging rectifiers
Control pin functions & applications
Modular AC front-end system
Design requirements
High Boost HAM
EMC considerations
Filter Input Attenuator Module
Current sharing in power arrays
MIL-COTS Filter Input Attenuator
Thermal performance information
Output ripple attenuator
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
Visit
vicorpower.com
& get your
Design Guide
DC-DC
BRICKs
Web ExpressCode: prodselect
Part Numbering Maxi, Mini & Micro Series Converters
Maxi example:
V24A48M400BN
24 Vin, Maxi, 48 Vout @ 400 W,
long ModuMate pins, slotted baseplate
V
48
Input
Voltage [a]
[a]
A
Mini example:
V48B28C250BG
48 Vin, Mini, 28 Vout @ 250 W,
long RoHS pins, slotted baseplate
48
Package
Output
A = Maxi Voltage [a]
B = Mini
C = Micro
Consult factory for other input / output / power models.
C
500
Product Grade
E = –10 to +100°C
C = –20 to +100°C
T = – 40 to +100°C
H = –40 to +100°C
M = –55 to +100°C
Output
Power
Micro example:
V375C24C150BG
375 Vin, Micro, 24 Vout @ 150 W,
long RoHS pins, slotted baseplate
B
L
Pin Style
Blank = Short tin / lead
L = Long tin / lead
S = Short ModuMate
N = Long ModuMate
F = Short gold (RoHS)
G = Long gold (RoHS)
Baseplate
Blank = Slotted
2 = Threaded
3 = Through hole
Designators Maxi, Mini, Micro Family
Input
Voltage
2V
24 (18-36)
-28 (10-36)
-48 (36-75)
-72 (43-110)
-110 (66-154)
-150 (100-200)
-300 (180-375) 160 W
375 (250-425) 160 W
Maximum Power available for Maxi (Full Brick)
3.3 V
264 W
150 W
264 W
264 W
200 W
264 W
264 W
264 W
5V
400 W
175 W
400 W
300 W
300 W
400 W
400 W
400 W
6.5 V
400 W
200 W
-------
8V
300 W
200 W
--300 W
400 W
400 W
400 W
12 V
400 W
200 W
500 W
400 W
400 W
500 W
500 W
600 W
Output Voltages
15 V
24 V
400 W
400 W
200 W
200 W
500 W
500 W
400 W
400 W
400 W
400 W
500 W
500 W
500 W
500 W
600 W
600 W
28 V
400 W
200 W
500 W
400 W
400 W
500 W
500 W
600 W
32 V
-------600 W
36 V
400 W
200 W
500 W
400 W
400 W
500 W
500 W
600 W
48 V
54 V
400 W
-200 W
-500 W
-400 W
-400 W
-500 W
-500 W
-600 W 600 W
36 V
200 W
250 W
250 W
200 W
250 W
250 W
300 W
48 V
200 W
250 W
250 W
200 W
250 W
250 W
300 W
54 V
--------
36 V
100 W
100 W
150 W
150 W
100 W
150 W
150 W
150 W
48 V
100 W
100 W
150 W
150 W
100 W
150 W
150 W
150 W
54 V
---------
Maximum Power available for Mini (Half Brick)
2V
24 (18-36)
-48 (36-75)
100 W
72 (43-110)
-110 (66-154)
-150 (100-200)
-300 (180-375) 100 W
375 (250-425) 100 W
3.3 V
150 W
150 W
100 W
100 W
150 W
150 W
150 W
5V
200 W
200 W
150 W
150 W
200 W
200 W
200 W
6.5 V
--------
8V
200 W
-150 W
150 W
200 W
200 W
200 W
Output Voltages
12 V
15 V
24 V
200 W
200 W
200 W
250 W
250 W
250 W
250 W
250 W
250 W
200 W
200 W
200 W
250 W
250 W
250 W
250 W
250 W
250 W
300 W
300 W
300 W
28 V
200 W
250 W
250 W
200 W
250 W
250 W
300 W
32 V
--------
Maximum Power available for Micro (Quarter Brick)
2V
24 (18-36)
-28 (9-36)
-48 (36-75)
50 W
72 (43-110)
-110 (66-154)
-150 (100-200)
-300 (180-375) 50 W
375 (250-425) 50 W
3.3 V
75 W
50 W
75 W
75 W
50 W
75 W
75 W
75 W
5V
100 W
50 W
100 W
100 W
75 W
100 W
100 W
100 W
6.5 V
---------
8V
100 W
--100 W
75 W
100 W
100 W
100 W
Output Voltages
12 V
15 V
24 V
100 W
100 W
100 W
100 W
100 W
100 W
150 W
150 W
150 W
150 W
150 W
150 W
100 W
100 W
100 W
150 W
150 W
150 W
150 W
150 W
150 W
150 W
150 W
150 W
28 V
100 W
100 W
150 W
150 W
100 W
150 W
150 W
150 W
32 V
---------
See Vicor PowerBench Online for intermediate power modules and to customize a solution.
See Data Sheet for detailed electrical specifications and intermediate power modules.
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
15
Cool-ORing™ Series
Universal Active ORing Controllers
Web ExpressCode: oring
PI2001 / PI2002 / PI2003
RoHS
The Cool-ORing PI2001/2/3 are universal high-speed Active ORing
controller IC solutions designed for use with N-channel MOSFETs in
redundant power system architectures. The PI2001/2/3 Cool-ORing
controllers enable an extremely low power loss solution with fast dynamic
response to fault conditions, critical for high availability systems. The
PI2001/3 control single or parallel MOSFETs to address Active ORing
applications protecting against power source failures. The PI2003 is
optimized for low side -48V Active ORing applications. An internal VC
shunt regulator enables biasing of the controller directly from -48 V
(GND). The PI2002 includes a load disconnect feature for use with backto-back N-channel MOSFETs in redundant power architectures.
Features
The gate drive output turns the MOSFET on in normal steady state
operation, while achieving high-speed turn-off during input power source
fault conditions, which cause reverse current flow, with auto-reset once
the fault clears. The PI2002 has the added benefit of being able to
protect against output load fault conditions that may induce excessive
forward current and device over-temperature by removing gate drive from
the back-to-back MOSFETs with an auto-retry programmable off-time.
Part Numbering
Part Number
Package
Target
Application
PI2001-00-QEIG
PI2002-00-QEIG
3 x 3 mm
10 Lead TDFN
PI2003-00-QEIG
PI2001-00-SOIG
8 Lead
SOIC
PI2002-00-SOIG
Bias
Supply
Universal Low Voltage
Active ORing
4.5 V – 13.2 V
Active ORing
w/ Load Disconnect
Internal VC Clamp
48 V Optimized
10 V – 12 V
Low Side Active ORing
Universal Low Voltage
Active ORing
4.5 V – 13.2 V
Active ORing
w/ Load Disconnect
Internal VC Clamp
48 V Optimized
10 V – 12 V
Low Side Active ORing
5 mm x 6 mm
8-Lead
SOIC
3 mm x 3 mm
10-Lead
TDFN
Fast dynamic response to power source failures,
with 160 ns reverse current turn-off delay time
4 A gate discharge current
Accurate MOSFET drain-to-source voltage sensing
to indicate system level fault conditions
Programmable under and overvoltage detection
Overtemperature fault detection
Adjustable reverse current blanking timer
Withstands 100 V transients in low-side applications
Master / Slave I/O for paralleling (TDFN package only)
Active-low fault flag output
MOSFET Gate
MOSFET Gate
Drive Voltage Discharge Current
Turn-off
Delay Time
Shipment
Packaging
8.5 V – 10.5 V
160 ns (typ.)
9.0 V – 11.0 V
Reverse Fault, 120 ns (typ.)
Forward Overcurrent, 150 ns (typ.)
VC – 0.25 V
4 A (typ)
8.5 V – 10.5 V
160 ns (typ.)
9.0 V – 11.0 V
Reverse Fault, 120 ns (typ.)
Forward Overcurrent, 150 ns (typ.)
PI2003-00-SOIG
VC – 0.25 V
Evaluation Boards
PI2001-EVAL1
PI2001 Evaluation Board using 3 x 3 mm TDFN package and SO-8 MOSFET in high-side configuration. (pg. 47)
PI2002-EVAL1
PI2002 Evaluation Board using 3 x 3 mm TDFN package and back-to-back SO-8 MOSFETs in high-side configuration. (pg. 47)
PI2003-EVAL1
PI2003 Evaluation Board using 3 x 3 mm TDFN package and 100 V SO-8 MOSFET in low-side configuration. (pg. 47)
PI2001 performance
Typical Application
Return
VIN1
Input Short
0V
SN
GATE
VC
FT
PI2003
PI2001
FT
VC
VC
GND
SN
OV
LOAD
SP
UV
0A
Input
Current
Normal operation (forward current)
Reverse Current
GATE SP GND
Vd (Redundant Bus)
–Vin1
VC
GND
0V
PI2003
FT
PI2001
VC
VC
SN
GATE
LOAD
SP
UV
FT
SN
Vgate
160ns
GATE SP GND
Turn Off Delay Time
OV
MOSFET Miller Effect
Vs (Input)
Reverse detection
VIN2
–Vin2
0V
High-side Active ORing
16
Low-side Active ORing
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
Typical dynamic response of the PI2001 to an input power source
short circuit fault condition
Tape
and
Reel
Cool-ORing™ Series
Full-Function Active ORing Solutions
Web ExpressCode: oring2
PI2121 / PI2122 / PI2123 / PI2125
RoHS
The Cool-ORing PI2121/3/5 are complete full-function Active ORing solutions
each with a high-speed ORing MOSFET controller and a very low on-state
resistance MOSFET designed for use in redundant power system architectures.
The PI2121/3/5 Cool-ORing solutions are offered in an extremely small,
thermally enhanced 5 x 7 mm LGA package and can be used in low voltage
(≤5 V bus, ≤9.6 V bus and ≤12 V bus respectively) high side Active ORing
applications. The PI2121/3/5 enable extremely low power loss with fast
dynamic response to fault conditions, critical for high-availability systems.
A master / slave feature allows the paralleling of PI2121/3/5 solutions for
high-current, Active ORing requirements.
5 mm x 7 mm x 2 mm
Thermally Enhanced LGA
Features
The PI2121/3/5 provide very high efficiency and low power loss during steady
state operation, while achieving high-speed turn-off of the internal MOSFET
during input power source fault conditions, which cause reverse current flow.
The PI2121/3/5 provide an active low fault flag output to the system during
excessive forward current, light load, reverse current, overvoltage, undervoltage
and overtemperature fault conditions.
The PI2122 is configured with back-to-back MOSFETs designed for use in ≤5 V
bus redundant power system architectures where added protection against
load fault conditions is required. The back-to-back MOSFET provides a true
bi-directional switch capability to disconnect load fault conditions that may
induce excessive forward current and device over-temperature.
Combines a high-speed ORing MOSFET controller
and low on-state resistance MOSFET
Integrated high-performance MOSFET
PI2121: 8 V, 24 A, 1.5 mΩ
PI2122: 7 V, 12 A, 6 mΩ (back-to-back MOSFET)
PI2123: 15 V, 15 A, 3 mΩ
PI2125: 30 V, 12 A, 5.5 mΩ
Very small, high density fully optimized solution
Fast dynamic response to power source failures,
with 160 ns reverse current turn-off delay time
Accurate sensing capability to indicate system fault
conditions
Programmable under and overvoltage functions
Overtemperature fault detection
Adjustable reverse current blanking timer
Master / Slave I/O for paralleling
Active-low fault flag output
Part Numbering
Part Number
Package
Voltage
Rating
Current
Handling
Target
Internal MOSFET
Application On-State Resistance
Bias
Supply
Turn-off
Shipment
Delay Time
Packaging
PI2121-00-LGIZ
8 V (max)
24 A (max)
≤5 V Bus
1.5 mΩ (typ)
PI2122-00-LGIZ
7 V (max)
12 A (max)
≤5 V Bus
6.0 mΩ (typ)
5 x 7 mm
4.5 V – 13.2 V 160 ns (typ.)
LGA
PI2123-00-LGIZ
15 V (max)
15 A (max)
≤9.6 V Bus
3.0 mΩ (typ)
PI2125-00-LGIZ
30 V (max)
12 A (max)
≤12 V Bus
5.5 mΩ (typ)
Evaluation Boards
PI2121-EVAL1PI2121 Evaluation Board configured for a high-side ground referenced application. (pg. 47)
PI2122-EVAL1PI2122 Evaluation Board configured for a high-side application. (pg. 47)
PI2125-EVAL2PI2125 Evaluation Board configured for a high-side floating application. (pg. 47)
Tape
and
Reel
Note: Both PI2121-EVAL1 and PI2125-EVAL2 are compatible with the PI2123 solution.
PI2121 / PI2123 / PI2125 Performance
Typical Applications
SP
SN
OV
PI2121
SL
D1
D2
SP
SN
N/C
OV
VC1
UV
PI2122
VIN2
S
FT
FT
BK
Vin 2
D
SP
SN
VC
SL
PI2121
D2
SN
UV
UV
FT
VC
BK
FT
GND
SCD GND
D1
N/C
VC2
OCD
SP
OV
OV
VC2
Vaux
GND
LOAD
VC
FT
FT
UV
VC1
VC
VC
PI2122
FT
Vaux
VC
Power Dissipation (W)
Vin 1
D
S
OCD
SCD GND
FT
Schottky Diode
10X Reduction
in Power Dissipation
Reducing Thermal
Management
Overhead
Cool-ORing
LOAD
VIN1
Input Current (A)
PI2121: High-side Active ORing
PI2122: High-side Active ORing
with Load Disconnect
Power dissipation comparison between Picor’s Cool-ORing solutions versus
industry standard Schottky diode solutions
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
17
AC-DC
Front-ends
Web ExpressCode: ham
HAM Input Harmonic Attenuator Module
RoHS
The Harmonic Attenuator Module (HAM) accepts an input of 85 – 264 Vac.
The “M” version provides a DC output compatible with Vicor’s 26x, J6x and
user-defined Maxi, Mini and Micro DC-DC converters. The “L” version is
compatible with V375 series DC-DC converters. The combination of a HAM,
one or more Vicor DC-DC converters, and the 30205 line filter, listed on
Page 51, offers a high-density power solution meeting EN61000-3-2.
Features
Power output: Up to 675 W
Input: 85 – 264 Vac
Meets EN61000-3-2
0.99 Power Factor
Short-circuit protection
High efficiency
Input-surge limiting
Dimensions:
4.6" x 2.4" x 0.5"
(117 x 61,0 x 12,7 mm)
cULus, cTÜVus, CE Marked
Part Numbering Ordering, see back cover for contacts
V I
Family
VI = Non-RoHS
VE = RoHS
[a] Compatible
- H A M
Product Types
HAM = Driver HAM
HAMD = Driver HAM for
use with the BAMD
BAMD = Booster HAM
-
C
L
Product Grade
E = –10 to +85°C
C = –25 to +85°C
I = – 40 to +85°C
M = –55 to +85°C
Output Power
M = 600 W
L = 675 W [a]
with V375 Maxi, Mini, Micro Series
Note: If power requirements exceed the capability of one HAM, use a HAMD and one or more BAMDs, with
an external bridge rectifier. HAM, HAMD, and BAMD modules require three surge suppressors in series directly
across the input. These surge suppressors are already contained in the EMI filter P/N 30205. Also, use a 10 A,
3AG fast-blow fuse ahead of the line filter.
General Performance Refer to data sheet for detailed specifications
Parameter
AC line input
Specifications
Notes
85 – 264 Vac
Continuous operation
47 – 63 Hz
Output power
Up to 675 W
Efficiency
92%
Power factor
0.99
Total harmonic distortion [b]
<8.5%
Output ripple
7 Vp-p
Cout = 1000 µF, 600 W
Inrush current
20 A peak
No external circuitry
Hold-up capacitance
500 – 3,000 µF
Power dependent
Isolation voltage
Input to output
None
Provided by DC-DC converters
Input / output to baseplate
1,500 Vrms
19 – 23 Vdc @ ≤3 mA
Auxiliary output
Thermal shut down
90 to 100°C baseplate
Short-circuit protection
Yes
Weight
6 oz (170 g)
[b] With
sinusoidal input voltage ITHD – VTHD = THD
Typical Configuration Not for design use; see data sheet for more information
30205
Line Filter
18
VI-HAM-CL
+Out
Pok
E/O
A/S
-Out
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
+In
Gate In
Gate Out
-In
V375
VI-26X
VI-J6X
+Out
+S
T
-S
-Out
LOAD
AC-DC
Front-ends
Web ExpressCode: pfcfrontend
PFC FrontEnd 384 V Output
RoHS
The PFC FrontEnd from Westcor is a low-profile, 1 RU enclosed chassismount AC front end that may be used with any 375 Vin Vicor module,
VIPAC Array, BCM, or other module to create a complete, high-density
AC-DC power supply. Accepting universal input voltages of 85 – 264 Vac,
and 100 – 380 Vdc, the PFC FrontEnd can deliver up to 2,200 Watts from
four non-isolated outputs. With an extremely compact package size of
1.72"x 6.4"x 7" (43,6 x 162,6 x 177,8 mm), the PFC FrontEnd can provide
>28 W/in3.
Besides meeting the UL, cTÜVus and CE Marked safety agency approvals,
the PFC FrontEnd complies with harmonic current limits per EN61000-3-2,
Electrical Fast Transient / burst EN61000-4-5. It also meets MIL-STD-810E
for vibration.
Features
Part Number
Power Factor Corrected (PFC)
Output voltage: 384 V
Low profile: 1.72" (43,6 mm)
Integral cooling fans
Output power: Up to 2,200 Watts
Meets MIL-STD-810E for vibration
High power density
DIN rail mountable
Up to four non-isolated outputs
Safety agency approvals:
cTÜVus, CE Marked
F E 3 7 5 -1
General Performance Refer to data sheet for detailed specifications
Product
Dimensions
Input Voltage
Output Power
Number of Outputs
85 – 264 Vac
2,200 W @ 230 Vac
4 (non-isolated)
1.72" x 6.4" x 7"
PFC FrontEnd
47 – 800 Hz
(43,6 x 162,6 x 177,8 mm)
100 – 380 Vdc
1,100 W @ 115 Vac
Typical Configuration With VIPAC Array; see data sheet for more information
MBJ5
EXTERNAL HUB
PIN FUNCTION
MBJ5
4
N/C
2
4
3
N/C
1
3
2
375 V COM
1
375 Vdc
OPTIONAL
EXTERNAL HUB
P3
CBJx
1 OF 4
PFC F/E
CBJx
PIN FUNCTION
P1
3
3
N/C
3
2
2
14 Vdc
2
1
1
14 V COM
1
P/E
MBJx
1 OF 4
MBJx
PIN FUNCTION
20
9
8
7
6
5
4
3
2
1
J1
J1
PIN FUNCTION 10 20
9
9
1-4
-V IN
8
8
5-7
+V IN
8
NC/PR
7
7
9
PE
6
6
10
-REMOTE
5
5
11-13
-V IN
4
4
14-17
+V IN
18
NC/PR
3
3
19
PE
2
2
20
+REMOTE
1
1
VIPAC
ARRAY
P2
4
4
DISABLE
4
3
3
375 V COM
3
2
N/C
1
375 Vdc
2
VIPAC ARRAY
ADAPTOR
10
9
8
7
6
5
4
3
2
1
2
1
1
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
19
AC-DC
Front-ends
Web ExpressCode: aim
AIM AC Input Module
RoHS
The AIM (Alternating Input Module) is an AC front-end module which
interfaces directly with worldwide AC mains. The AIM provides line
rectification, EMI / RFI filtering, transient protection, and inrush limiting in a
half-brick package measuring 2.28" x 2.4" x 0.5"(57,9 x 61,0 x 12,7 mm).
The AIM is used in conjunction with Vicor VI-200 or VI-J00 DC-DC
converters to realize a universal AC input, high-density, low-profile
switching power supply with outputs from 1 – 95 Vdc and a total power
rating up to 200 W. An external capacitor is used to satisfy system hold-up
requirements. Internal EMI filtering meets EN55022 and FCC Part 15,
Class A emissions limits.
MIL-COTS Version
Available
Features
Page 35
Universal input: 85 – 264 Vac
Output power: 250 W
Operating temperature up to
100˚C baseplate (no derating)
Efficiency: 97%
Integral EMI filtering
Input transient protection
Inrush limiting
cULus, cTÜVus, CE Marked
Part Numbering Ordering, see back cover for contacts
V I
Family
VI = Non-RoHS
VE = RoHS
- A I M
Product
- E
Product Grade
E = –10°C to +85°C
C = –25°C to +85°C
I = –40°C to +85°C
M = –55°C to +85°C
1
AC Input Module
General Performance Refer to data sheet for detailed specifications
Parameter
AC line input
Specifications
Notes
85 – 264 Vac
No strapping
47 – 440 Hz
No damage below low line
Output power
Up to 250 W
Efficiency
97%
Power factor
0.62
Inrush current
<40 A peak
No external circuitry
Hold-up capacitance
270 – 1,200 µF
Power dependent
Input to output
None
Provided by DC-DC converters
Input / output to baseplate
1,500 Vrms
Isolation voltage
Short-circuit protection
No
Weight
3 oz (85 g)
Typical Configuration Not for design use; see data sheet for more information
L1
N/C
85 – 264 Vac
N/C
L2/N
+Out
Gate In
Parallel
Gate Out
-Out
+In
Gate
In
Gate
Out
-In
VI-AIM
20
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
+Out
Vicor DC-DC
Converter
+S
Trim
-S
-Out
Load
AC-DC
Front-ends
Web ExpressCode: arm
Autoranging Rectifier Module ARM
RoHS
The Autoranging Rectifier Module (ARM) is the front end of a switching
power supply and uses a microprocessor to control strapping of the voltage
doubler. The user only needs to add an input filter, hold-up capacitor and
appropriate DC-DC converters to realize an autoranging, high-density,
low-profile switching power supply.
Part Numbering Ordering, see back cover for contacts
Features
V I - A R M
Efficiency: 96 – 98%
Operating temperature: Up to 100˚C baseplate
(no derating)
Agency approvals: cTÜVus, cULus, CE Marked
AC Bus OK, module enable
Inrush limiting (no external circuitry)
Autoranging input: 90 – 132 / 180 – 264 Vac
Product
Blank =
[a]
500 W / 750 W [a]
B=
=
B
[b]
750 W
W // 1,500
1,500 W
W [b]
750
[a]
[b]
[c]
E
C
T
H
M
- C
1
Product Grade
Type
= –10 to +100°C
1=
= –20 to +100°C
500 W / 750 W
[c]
= –40 to +100°C
2=
= –40 to +100°C [c]
750 W / 1,500 W
= –55 to +100°C
2
3
Baseplate
Pin Style
Blank = Slotted
1 = Short
2 = Threaded
2 = Long
S = Short ModuMate 3 = Through hole
N = Long ModuMate
F = Short RoHS
G = Long RoHS
Valid combination with Type 1 only
Valid combination with Type 2 only
T-Grade storage temp. is –40°C; H-Grade storage temp. is –55°C
Web ExpressCode: farm
Filter / Autoranging Rectifier Module FARM
RoHS
The FARM (Filter / Autoranging Rectifier Module) is an
AC front-end module which provides EMI filtering,
autoranging line rectification, transient protection,
and inrush current limiting.
Part Numbering Ordering, see back cover for contacts
F A R M
Product
[d]
Type
1 = 500 W / 750 W
2 = 750 W / 1,000 W
E
C
T
H
1
Product Grade
= –10 to +100°C
= –20 to +100°C
= –40 to +100°C [d]
= –40 to +100°C [d]
C
1 1
Pin Style
1 = Short
2 = Long
S = Short ModuMate
N = Long ModuMate
F = Short RoHS
G = Long RoHS
Baseplate
1 = Slotted
2 = Threaded
3 = Through hole
T-Grade storage temp. is –40°C; H-Grade storage temp. is –55°C
General Performance for ARM & FARM Refer to data sheet for detailed specifications
Parameter
Input voltage
Input frequency (C & E-Grade)
Input frequency (T & H-Grade)
Output power
115 Vac input
230 Vac input
Compatible DC-DC converter
Efficiency (typical)
Inrush current (peak line. Cold start)
Dielectric withstand: Input / output
I/O to baseplate
Package
Dimensions
Operating temperature (C-Grade)
Operating temperature (T-Grade)
Weight
ARM -( )12
ARM B-( )22
FARM1( )21
FARM2( )21
90 – 132 Vac
180 – 264 Vac
47 – 63 Hz
47 – 880 Hz
90 – 132 Vac
180 – 264 Vac
47 – 63 Hz
47 – 880 Hz
500 Watts
750 Watts
750 Watts
1,500 Watts
26x, J6x, V300
97%
<30 A @ 264 Vac
<60 A @264 Vac
Provided by DC-DC converters
1,500 Vrms
Micro
2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm)
–20 to +100°C
– 40 to +100°C
2.1 oz (60 g)
500 Watts
750 Watts
750 Watts
1,000 Watts
26x, J6x, V300
96%
<30 A @ 264 Vac
<60 A @264 Vac
Provided by DC-DC converters
1,500 Vrms
Mini
2.28" x 2.2" x 0.5" (57,9 x 55,9 x 12,7 mm)
–20 to +100°C
– 40 to +100°C
3.1 oz (87.9 g)
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
21
AC-DC
Front-ends
Web ExpressCode: enmods
ENMods Modular AC Front-end System
RoHS
The ENMod system is an AC front-end solution providing compliance to
electromagnetic compatibility (EMC) standards. It consists of the MiniHAM
passive harmonic attenuation module and the FARM3 autoranging AC-DC
front-end module. Combined with filtering and hold-up capacitors, the
ENMod system provides full compliance to EN61000-3-2 Harmonic Current,
EN55022, Level B Conducted Emissions, EN61000-4-5 Surge Immunity,
EN61000-4-11 Line Disturbances, and EN61000-3-3 Inrush Current. Unlike
active PFC solutions, the MiniHAM generates no EMI, greatly simplifying
and reducing system noise filtering requirements. It is also smaller and more
efficient than active alternatives. Optimized for operation on the DC bus
(provided by the FARM3) rather than directly on the AC line, it will provide
harmonic current compliance at up to 600 W of input power at 230 Vac.
The FARM3 is a filter and autoranging module that has been optimized for
use as the front end for the MiniHAM. Both modules are in Vicor’s standard
Mini half-brick package.
Part Numbering Ordering, see back cover for contacts
Features
Passive harmonic current
attenuation to EN61000-3-2
575 W rated power output
Autoranging 115/230 Vac Input
Inrush current limiting
E N 1
Product Type [a]
Product Grade (°C)
E = –10 to +100
C = –20 to +100
T = –40 to +100 [c]
H = –40 to +100 [c]
C
1 1
Pin Style [b]
1 = Short
2 = Long
S = Short ModuMate
N = Long ModuMate
F = Short RoHS
G = Long RoHS
Baseplate
1 = Slotted
2 = Threaded
3 = Through hole
[a] EN1
[b] Pin
product includes one each MiniHAM and FARM3, same product grade, pin and baseplate style.
styles S & N are compatible with ModuMate interconnect systems for socketing and surface mounting.
storage temp. is –40°C; H-Grade storage temp. is –55°C
[c] T-Grade
General Performance Refer to data sheet for detailed specifications
Parameter
Operating input voltage
Specification
Notes
90 – 132 Vac
Autoranging (doubler-mode)
180 – 264 Vac
Autoranging (bridge-mode)
Output power (max)
575 Watts
Harmonic currents
EN61000-3-2
Transient surge immunity
EN61000-4-5
50 – 600 W, 230 Vac input
2 kV – 50 µs line to earth
1 kV – 50 µs line to line
Conducted emissions
EN55022, Class B
Safety
EN60950
Dimensions
MiniHAM
2.28" x 2.2" x 0.5” (57,9 x 55,9 x 12,7 mm)
FARM3
2.28" x 2.2" x 0.5” (57,9 x 55,9 x 12,7 mm)
Typical Configuration Not for design use; see data sheet for more information
N
EMI GND
FARM3
SR
L
22
+
N/+
N/+
+In
BOK
NC
NC
PC (Gate In)
ST
EN
NC
–
L/–
MINI
HAM
NC
NC
PR (Gate Out)
L/–
–In
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
+
Vicor 300 Vin
DC-DC
Converter
Load
–
DC-DC
BRICKS
Web ExpressCode: batmod
BatMod Battery Charger
RoHS
The fully-programmable BatMod current source module is based on the
VI-200 Series of DC-DC converters. It accepts 48, 150, or 300 V inputs,
provides programmable output current, and is well-suited for such
applications as battery chargers, metal platers, and laser diodes.
The BatMod is compatible with all major battery types, and is available
in booster versions for higher output current applications.
Features
Input voltages: 48, 150 or 300 V
Programmable output current
Booster versions for higher
output current applications
Agency approvals:
cULus, cTÜVus, CE Marked
Dimensions:
4.6" x 2.4" x 0.5"
(116,9 x 61,0 x 12,7 mm)
Part Numbering Ordering, see back cover for contacts
V I
-
2 6 1
- E U - B M
Family
Module
Input Voltage
VI = Non-RoHS 2 = Driver
Nominal
Range
VE = RoHS
B = Booster 3 = 48 V
42 – 60 V
5 = 150 V 100 – 200 V
6 = 300 V 200 – 400 V
[a] Available
Packaging Options
Output Voltage
Nominal
Range
1 = 12 V 11.25 – 16.5 V
[a]
3 = 24 V 22.5 – 33.0 V
4 = 48 V 45.0 – 66.0 V
Product Grade
E = –10 to +85°C
C = –25 to +85°C
I = –40 to +85°C
M = –55 to +85°C
in 300 V input only.
Chassis-mount housing VI-200 & VI-J00 Series, page 33
SlimMod
FinMod
BusMod
Flangeless package
Flangeless package with integral heat sink
Chassis mount housing with
screw / lug wiring interface
2.28"L x 1.80"W x 0.50"H
(57,9 x 45,7 x 12,7 mm)
Longitudinal, 0.25" fins — add suffix “– F1”
Longitudinal, 0.50" fins — add suffix “– F2”
2.28"L x 2.40"W x 1.08"H
(57,9 x 61,0 x 27,4 mm)
4.60"L x 1.80"W x 0.50"H
(116,8 x 45,7 x 12,7 mm)
Transverse, 0.25" fins — add suffix “– F3”
Transverse, 0.50" fins — add suffix “– F4”
4.60"L x 2.40"W x 1.08"H
(116,8 x 61,0 x 27,4 mm)
To order the SlimMod configuration add
the suffix “ – S” to the standard module
part number as shown on Page 13.
Available with longitudinal or transverse fins of 0.25" or 0.50" height. Add
the appropriate suffix to the module part number as shown on Page 13.
To order the BusMod fully assembled, add
suffix “–B1” to the standard module part
number as shown on Page 13.
To order the BusMod separately:
Half-sized BusMod — P/N 18952
Full-sized BusMod — P/N 06322
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
23
DC-DC
Filters
Web ExpressCode: fiam
FIAM Filter Input Attenuator Module
RoHS
A DC input, front-end module providing transient protection, inrush current
limiting and EMI filtering. The FIAM enables designers using Vicor Maxi,
Mini, and Micro 48 Vin DC-DC converters to meet the transient immunity
and EMI requirements of Telcordia, FCC, ETSI and European Norms.
Features
EMI filtering - Class A
MIL-COTS Version
Available
Inrush current limiting
Page 36
Transient protection
Input: 36 – 76 Vdc
10 and 20 Amp versions
Agency approvals: cULus, cTÜVus, CE Marked
General Performance Not for design use; see data sheet
Parameter
Specification
Input voltage
36 – 76 Vdc
Part Numbering Ordering, see back cover for contacts
F I A M
Output current
FIAM1xxx / FIAM2xxx
1
C
1 1
10 A / 20 A
Inrush limiting
Product
0.014 Amp/µF
Telcordia GR-1089-Core Issue 2,
EMI / RFI
EN55022, Class A, FCC Part 15, Class B
Type
1 = 10 A
2 = 20 A
Product Grade
C = –20 to +100°C
T = –40 to +100°C [a]
H = –40 to +100°C [a]
Telcordia GR-499-Core, Section 13-2,
Transient immunity
ETS 300 386-1, Class 2
Mini package
dimensions
[a] T-Grade
Pin Style
1 = Short
2 = Long
S = Short ModuMate
N = Long ModuMate
F = Short RoHS
G = Long RoHS
Baseplate
1 = Slotted
2 = Threaded
3 = Through hole
storage temp. is –40°C; H-Grade storage temp. is –55°C
2.28" x 2.2" x 0.5"
(57,9 x 55,9 x 12,7 mm)
Web ExpressCode: iam
Input Attenuator Module IAM
RoHS
The IAM provides EMI filtering and transient protection for industrial and
communications applications, using VI-200 and VI-J00 Series modules.
Features
Meets Telcordia & British Telecom standards for EMI/RFI
Meets Telcordia, IEC and British Telecom standards for transients
Agency approvals: cULus, cTÜVus, CE Marked
Efficiency: 97%
Input reverse polarity protection
Dimensions: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm)
MIL-COTS Version
Available
Page 36
IAM Models & General Performance
Model
Min.
Input Voltage
Typ.
Max.
Output
Power
200 W
VI-A11-CU
21 Vdc
24 Vdc
32 Vdc
VI-AWW-CU
18 Vdc
24 Vdc
36 Vdc
200 W
VI-A33-CQ
42 Vdc
48 Vdc
60 Vdc
400 W
VI-ANN-CQ
36 Vdc
48 Vdc
76 Vdc
400 W
VI-A66-CQ
200 Vdc
300 Vdc
400 Vdc
400 W
RoHS compliant versions begin with “VE-”. For example: VE-A33-CQ
24
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
DC-DC
Filters
Web ExpressCode: ram
RAM Ripple Attenuator Module
Combining active and passive filtering, the RAM attenuates both
low-frequency input power source fundamental and harmonics, and
high-frequency switching components in the frequency range of DC to
20 MHz, while exhibiting efficiencies of 93 – 99%. No adjustments are
required, and remote sense and output voltage trim features are retained.
Features
Reduces output ripple to <3 mV pp (VI-200)
Compatible with VI-200 / VI-J00 based products: 5 – 50 Vdc output
Full attenuation up to 20 A
No adjustments required
Efficiency: 93 – 99%
Converter sense, trim, overvoltage, and overcurrent retained
Dimensions: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm)
CE Marked
Input to VI-RAM
Part Numbering Ordering, see back cover for contacts
Typical Configuration Not for design use; see data sheet
+ In
+ In
+ Out
+ S In
+S
Gate In
VI-200
Trim
Gate Out
– In
V I
+ Out
+ S Out
VI-RAM N/C
– S In
–S
– Out
– In
Low Noise Output
-
R A M
-
C
2
Load
– S Out
– Out
Family
VI = Non-RoHS
VE = RoHS
Product
Product Grade
E = –10 to +100°C
C = – 25 to +100°C
I = – 40 to +100°C
M = –55 to +100°C
Type
1 = Up to 10 Amps
2 = Up to 20 Amps
Web ExpressCode: uram
Output Ripple Attenuator Module MicroRAM
RoHS
Combines both active and passive filtering to achieve greater than 40 dB of
noise attenuation from 60 Hz to 1 MHz.
Features
Integrated ORing diode supports N+1 redundancy
>40 dB ripple attenuation from 60 Hz to 1 MHz
Significantly improves load transient response
Reduces ripple to less than 10 mV peak to peak
Efficiency: Up to 98%
20 and 30 Amp ratings
3 – 30 Vdc input range
Dimensions: 2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm)
Compatible with Vicor’s DC-DC converters
MIL-COTS Version
Available
Page 36
Part Numbering Ordering, see back cover for contacts
µ R A M
2
C
2
1
Typical Configuration Not for design use; see data sheet
Product
RSENSE
5.1
+OUT
+IN
22 F
DC-DC
Converter
PR
–IN
+IN
+OUT
+S
PC
RHR
SC
SC
–S
LOAD
Vref
CTRAN
CTRAN*
–OUT
–IN
CHR*
–OUT
[a]
Type
2 = 20 Amps
3 = 30 Amps
Product Grade (°C)
C = –20 to +100
T = – 40 to +100 [a]
H = – 40 to +100 [a]
M = –55 to +100
Pin Style
Baseplate
1 = Short
1 = Slotted
2 = Long
2 = Threaded
S = Short ModuMate 3 = Through
N = Long ModuMate
hole
F = Short RoHS
G = Long RoHS
T-Grade storage temp. is –40°C; H-Grade storage temp. is –55°C
*Optional Component
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
25
Active Filters
QPI Family
Web ExpressCode: qpi
QPI-3LZ through QPI-12LZ Active EMI Filters
RoHS
The QPI family of active EMI filters provides conducted common-mode (CM) and differentialmode (DM) attenuation from 150 kHz to 30 MHz (CISPR22 range). The proprietary active
filtering circuit provides superior attenuation at low frequencies intended to support EN
Class B limits, including PICMG® 3.0 for ATCA.
Models QPI-3LZ through QPI-8LZ are designed to work with most switch-mode power supplies.
The QPI-9LZ through QPI-12LZ products are designed specifically for use with Vicor’s V•I Chip
power conversion products.
The QPI series are SiP (System-in-Package) solutions with Land Grid Array (LGA) mounting. The
QPI-3LZ through QPI-10LZ are full size 25 x 25 x 4,5 mm packages and the QPI-11LZ and QPI12LZ are half-size 12,5 x 25 x 4,5 mm packages. The QPI series is also available in an open
frame SiP platform by ordering with the “-01” suffix.
Patents Pending
Features
24/28 V and 48/60 V models
Efficiency: >99% at full load
Supports PICMG® 3.0 ATCA requirements
High density, low profile
surface mount LGA package
Integrated Hot-Swap in selected models
Compatible with most DC-DC converters
–40ºC to +100ºC PCB temperature
TU̇˙V approved
QPI Evaluation Boards
Available pg. 47
For more information,
go to picorpower.com
Part Numbering
Part Number
(-01 = Open Frame)[a]
Input
Voltage
Nominal
Range
Current
Rating
CM Attenuation
@ 250 kHz
DM Attenuation
@ 250 kHz
Hipot
Hot-Swap
QPI-3LZ
QPI-3LZ-01
QPI-4LZ
QPI-4LZ-01
QPI-5LZ
QPI-5LZ-01
QPI-6LZ
QPI-6LZ-01
QPI-7LZ
QPI-7LZ-01
QPI-8LZ
QPI-8LZ-01
24/28 Vdc
24/28 Vdc
48/60 Vdc
48/60 Vdc
24/28 Vdc
24/28 Vdc
48/60 Vdc
48/60 Vdc
24/28 Vdc
24/28 Vdc
48/60 Vdc
48/60 Vdc
10 – 40 Vdc
10 – 40 Vdc
30 – 80 Vdc
30 – 80 Vdc
10 – 40 Vdc
10 – 40 Vdc
30 – 80 Vdc
30 – 80 Vdc
18 – 38 Vdc
18 – 38 Vdc
32 – 76 Vdc
32 – 76 Vdc
7A
7A
7A
7A
14 A
14 A
14 A
14 A
6A
6A
6A
6A
60 dB
60 dB
40 dB
40 dB
60 dB
60 dB
40 dB
40 dB
50 dB
50 dB
40 dB
40 dB
80 dB
80 dB
70 dB
70 dB
80 dB
80 dB
80 dB
80 dB
80 dB
80 dB
70 dB
70 dB
707 Vdc
707 Vdc
1,500 Vdc
1,500 Vdc
707 Vdc
707 Vdc
1,500 Vdc
1,500 Vdc
707 Vdc
707 Vdc
1,500 Vdc
1,500 Vdc
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Yes
Yes
Yes
Yes
@ 1 MHz
@ 1 MHz
24/28 Vdc
24/28 Vdc
48/60 Vdc
48/60 Vdc
24/28 Vdc
24/28 Vdc
48/60 Vdc
48/60 Vdc
18 – 38 Vdc
18 – 38 Vdc
32 – 76 Vdc
32 – 76 Vdc
5 – 50 Vdc
5 – 50 Vdc
10 – 80 Vdc
10 – 80 Vdc
6A
6A
6A
6A
7 A [b]
7 A [b]
7 A [b]
7 A [b]
65 dB
65 dB
45 dB
45 dB
65 dB
65 dB
45 dB
45 dB
80 dB
80 dB
70 dB
70 dB
80 dB
80 dB
70 dB
70 dB
707 Vdc
707 Vdc
1,500 Vdc
1,500 Vdc
707 Vdc
707 Vdc
1,500 Vdc
1,500 Vdc
Yes
Yes
Yes
Yes
N/A
N/A
N/A
N/A
V•I Chip Specific Models
QPI-9LZ
QPI-9LZ-01
QPI-10LZ
QPI-10LZ-01
QPI-11LZ
QPI-11LZ-01
QPI-12LZ
QPI-12LZ-01
[a]
[b]
Open-frame units are compatible with aqueous cleaning processes.
Parallelable for up to 12 A.
Typical Configuration Not for design use; see data sheet
Performance
Models QPI-3LZ through QPI-8LZ
CR
Class B Limit
10 Ω, 1/4 W
26
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
Conducted EMI scans showing QPI performance.
Blue trace = no QPI; Red trace = with QPI.
Active Filters
QPO Family
Web ExpressCode: qpo
QPO-1LZ / QPO-2LZ Output Ripple Attenuator
RoHS
The QPO output ripple attenuator products use proprietary active filtering to
reduce power supply output ripple and noise (PARD) over 30 dB from 1 kHz
to 500 kHz. QPOs improve transient response and ensure quiet point-of-load
regulation. They also reduce the number of output capacitors to support
dynamic loads. QPOs work with most DC-DC converters and switching power
supplies. Output regulation is maintained using remote sensing or the trim
input of the power supply.
Features
>30 dB PARD attenuation, 1 kHz to 500 kHz
Supports precise point-of-load regulation
Efficiency: Up to 99%
High density, low profile LGA package
Reduces required number of output capacitors to
support dynamic loads
User selectable optimization of attenuation,
power dissipation, and transient load response
Compatible with most DC-DC converters
Patents Pending
Part Numbering
Part Number
(-01 = Open Frame)[a]
QPO-1LZ
QPO-1LZ-01
QPO-2LZ
QPO-2LZ-01
[a]
Input Voltage
Current Rating
3 – 30 Vdc
3 – 30 Vdc
0.3 – 5.5 Vdc
0.3 – 5.5 Vdc
10 A
10 A
20 A
20 A
Attenuation
> 30 dB PARD attenuation, 1 kHz to 500 kHz
> 30 dB PARD attenuation, 1 kHz to 500 kHz
> 20 dB PARD attenuation, 1 kHz to 500 kHz, Aux. Bus biased
> 20 dB PARD attenuation, 1 kHz to 500 kHz, Aux. Bus biased
Open-frame units are compatible with aqueous cleaning processes.
Typical Application
Performance
LOAD+
VOUT+
QPO OUT
QPO IN
Rsc
SENSE+
QPO-1LZ
RSL
SC
Cout
QPO IN (AC)
SC SET
CESR
SC
REFGND
GND
VREF
QPO OUT (AC)
CSC
RHR
SENSEVOUTLOAD-
LOAD CURRENT
(DC) 5A/DIV
QPO Evaluation
Boards Available pg. 47
For more information,
go to picorpower.com
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
27
AC-DC
Configurable Power Supplies
Web ExpressCode: flatpac
FlatPAC Family 50 – 600 Watt Power System
RoHS
The FlatPAC is a complete, low-profile, agency-approved switching power
supply. It combines Vicor’s VI-200 Series of DC-DC converters and frontend subassemblies to provide from 50 – 600 W of output power from
one to three outputs.
The FlatPAC design provides rapid turnaround on standard models.
FlatPAC is available with BatMod current source module, Page 23.
Features
Microprocessor-controlled front end
Finned or conduction-cooled package
Inputs: 115/230 Vac, autoranging
FCC Part 15, Class B,
EN55022, Class B
22 Standard output voltages
from 1 – 95 Vdc
Low-noise ZCS / ZVS power topology
40 ms hold up
Transient surge: EN61000-4-5
Agency approvals:
cULus, cTÜVus, CE Marked
Low profile only 1.37” (34,7 mm)
Custom output voltages also available
BatMod current-source option available
Module disable
BUS OK and AC OK
Chassis Configurations
General Performance Refer to data sheet for specifications
Parameter
Specification
Number of outputs
1 to 3
Output power
Up to 600 W
90 – 132 Vac / 180 – 264 Vac
Input voltage
EN/FCC “B”
Set point
±1% max. (E-Grade 2%)
Load / line regulation
0.2% max. (E-Grade 0.5%)
Output ripple (pp)
150 mV or 3% max. (E-Grade 5%)
Trim range
[a]
Single output
50 – 200 Watts
9.25” x 2.5” x 1.37”
(234,8 x 63,5 x 34,8 mm)
Single or dual outputs
100 – 400 Watts
9.25” x 4.9” x 1.37”
(234,8 x 124,5 x 34,8 mm)
Single, dual
or triple outputs
OUTPUT 1
47 – 63 Hz (400 Hz available; contact factory)
Conducted EMI
OUTPUT 1
50 – 110%
Remote sense range
0.5 Vdc max.
OVP set point
125% typical
Current limit
115%
150 – 600 Watts
Maximum temperature
0 to 85°C baseplate
9.25” x 7.3” x 1.37”
(234,8 x 185,4 x 34,8 mm)
[a]
10, 12 and 15 V outputs, standard trim range ± 10%.
Consult factory for wider trim range.
OUTPUT 1
Part Numbering
VI
-
M
U
3
Family
L = Single
M = Single
N = Single
P = Dual
Q = Dual
R = Triple
Input
U = Autoranging
90 – 132 and
180 – 264 Vac
Out 1
Z = 2V
Y = 3.3 V
0 = 5V
X = 5.2 V
W = 5.5 V
V = 5.8 V
T = 6.5 V
R = 7.5 V
-
C
Q
(VE) = RoHS
Compliant
Out 2 [b]
Out 3 [c]
M = 10 V
K = 40 V
1 = 12 V
4 = 48 V
P = 13.8 V H = 52 V
2 = 15 V
F = 72 V
N = 18.5 V D = 85 V
3 = 24 V
B = 95 V
L = 28 V
J = 36 V
All voltages available for output 1, 2, or 3
Power 1
Grade
M = 600 W
E = 0°C
P = 450 W
C = 0°C
I = –30°C Q = 400 W
S = 300 W
U = 200 W
V = 150 W
W = 100 W
X = 75 W
Y = 50 W
For conduction-cooled package add – CC to the part number. For example, VI –LU0–CV–CC.
[b] For P, Q, R, PJ, and RJ only. Refer to output configuration chart above.
[c] For R and RJ only. Refer to output configuration chart above.
28
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
Power 2 [b]
U = 200 W
V = 150 W
W = 100 W
X = 75 W
Y = 50 W
Power 3 [c]
U = 200 W
V = 150 W
W = 100 W
X = 75 W
Y = 50 W
AC-DC
Configurable Power Supplies
Web ExpressCode: pfcflatpac
PFC FlatPAC Single Output Power System
RoHS
The PFC FlatPAC uses Vicor’s field-proven VI-HAM and Maxi DC-DC
converters to deliver up to 575 watts of clean, reliable power. The PFC
FlatPAC is a single-output power supply available with standard output
voltages from 3.3 – 54 Vdc. It operates from an input of 85 – 264 Vac, includes
active power factor correction (0.99 power factor), and meets EN61000-3-2
harmonic current limits. Internal filtering provides compliance to EN55022-A
conducted EMI. It is available in Vicor’s low profile 1.37" (34,8 mm) FlatPAC
chassis, in either finned or conduction-cooled (CC) versions.
Features
Input: 85 – 264 Vac
Power factor: 0.99
Safety agency approvals:
cULus, cTÜVus, CE Marked
Single output: Up to 80 A
or 575 W, 3.3 – 54 Vdc
High efficiency
Remote sense
Low profile package:
1.37" x 4.9" x 9.25"
(34,8 x 124,4 x 235 mm)
Current limit
Thermal shut down
OVP
General Performance Refer to data sheet for detailed specifications
Parameter
Rating
Unit
85 – 264
Vac
Notes
Input
Voltage
Frequency
Regulation line / load
47 – 63
Hz
47 – 440
Hz
I-Grade
0.5
%
10 to 100% load
Mechanical
Weight
Dimensions
44.8 (1,304)
oz (g)
1.37 x 4.9 x 9.25
inches
24,8 x 1,244 x 235
mm
Operating temperature (case)
C-Grade and E-Grade
0 to +85
˚C
–30 to +85
˚C
E-Grade
–10 to +100
˚C
C-Grade
–30 to +100
˚C
I-Grade
–55 to +100
˚C
I-Grade
Storage temperature (case)
Part Numbering Ordering, see back cover for contacts
V I -
C M U
3
-
C
M
-
(VE) = RoHS
Compliant
Input
Universal
85 – 264 Vac
Y
0
1
2
G
Output Voltage
= 3.3 V
3 = 24 V
= 5.0 V
L = 28 V
= 12 V
J = 36 V
= 15 V
4 = 48 V
= 54 V
Product Grade (°C)
E = 0 to 85°C case
C = 0 to 85°C case
I = –30 to 85°C case
Output Power
Vout = ≤5 V Vout ≥12 V
Q = 80 A
M = 575 W
Options
-CC = Conduction Cooled
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
29
AC-DC
Configurable Power Supplies
Web ExpressCode: vipac
VIPAC Power System Choice of Chassis Configurations
RoHS
The VIPAC is an integrated power system leveraging the latest advances in
DC-DC converter technology and modular front ends. VIPAC combines
application-specific power processing units (PPU), a choice of chassis styles
and remotely located hold-up capacitors to provide fast, flexible, and highly
reliable power solutions for a wide range of demanding applications.
The PPU is the core element of the system and incorporates Vicor’s
autoranging FARM modular front end to provide transient protection, EMI
filtering, and inrush current limiting. The PowerBench VIPAC Design Center
enables designers to configure the PPU with up to three independently
regulated outputs having power levels from 50 – 500 W and with as much
as 900 W total output power.
RoHS-compliant versions can
be selected with the VIPAC
Design Tool.
Features
AC input: 115/230 Vac autoranging,
47 – 440 Hz
Choice of output terminations:
LugMate or PlugMate
Output voltages: 2 – 48 Vdc
50 – 900 Watts total;
1, 2, or 3 outputs
Local or remote control
Package style:
Low-profile coldplate
Optional finned heat sink
Agency approvals:
cULus, cTÜVus, CE Marked
Protective features:
Inrush current limiting
Input transient protection
EMI filtering
Configure Your VIPAC Power
System Online
PO
ERBENCH
vicorpower.com/vcad
Chassis Configurations Dimensions vary with specific model configurations
3 Micros
Dual or triple output
Up to 450 W
4.96" x 6.8" x 0.75"[a]
(126,0 x 172,7 x 19,0 mm)
2 Minis
Single or dual output
Up to 500 W
4.96" x 6.8" x 0.75"[a]
(126,0 x 172,7 x 19,0 mm)
2 Maxis
Single or dual output
Up to 900 W
4.96" x 9.15" x 0.75"[a]
(126,0 x 232,4 x 19,0 mm)
2 Micros
Single or dual output
Up to 300 W
3.15" x 6.8" x 0.75"[a]
(80,0 x 172,7 x 19,0 mm)
1 Mini
Single output
Up to 250 W
3.15" x 6.8" x 0.75"[a]
(80,0 x 172,7 x 19,0 mm)
1 Maxi
Single output
Up to 500 W
3.15" x 9.15" x 0.75"[a]
(80,0 x 232,4 x 19,0 mm)
[a]
30
PlugMate version is 0.81" (20,5 mm) in height
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
1 Micro
Single output
Up to 150 W
3.15" x 6.8" x 0.75"[a]
(80,0 x 172,7 x 19,0 mm)
DC-DC
Configurable Power Supplies
Web ExpressCode: vipacarray
VIPAC Arrays DC Input Power System • 1 – 4 Outputs
RoHS
The VIPAC Arrays are a highly flexible system of DC input power building
blocks which can be configured with as many as four user-definable
outputs on a low-profile, coldplate chassis. Using Vicor’s VCAD design tool
(vicorpower.com/vcad), designers are able to specify VIPAC Arrays with
inputs of 24, 28, 48, 72, 110, 150, 300, 375 Vdc and outputs from 2 to
54 Vdc at power levels up to 600 watts per output. VIPAC Arrays are ideal
for use in distributed and modular power systems where power density
and reliable operation are critical. A current share option is available on
single output models enabling them to be used in applications requiring
high power / redundancy. Fully connectorized input and output
terminations speed system installation and a versatile coldplate chassis
simplifies thermal management.
Features
Input voltage: 24, 28, 48, 72, 110, 150, 300 or 375 V
Booster versions for higher output current applications
Agency approvals: cTÜVus, CE Marked
(300, 375 Vdc inputs only)
RoHS-compliant versions can
be selected with the VIPAC
Design Tool.
MIL-COTS Version
Available
Page 37
Configure Your VIPAC Array
Power System Online
PO
ERBENCH
vicorpower.com/vcad
Chassis Configurations Dimensions vary with specific model configurations
[a]
2 Minis
Single or dual outputs
Up to 600 W total
3.62" x 6.69" x 0.78"[a]
(92,0 x 170,0 x 19,8 mm)
1 Micro, 2 Minis
Dual or triple outputs
Up to 750 W total
3.62" x 7.52" x 0.78"[a]
(92,0 x 191,0 x 19,8 mm)
1 Mini, 2 Micros
Single, dual or triple
outputs
Up to 600 W total
3.62" x 6.69" x 0.78"[a]
(92,0 x 170,0 x 19,8 mm)
4 Micros
Dual, triple or quad
outputs
Up to 600 W total
3.62" x 7.52" x 0.76"[a]
(92,0 x 191,0 x 19,3 mm)
3 Micros
Dual or triple outputs
Up to 450 W total
3.62" x 6.69" x 0.76"[a]
(92,0 x 170,0 x 19,3 mm)
1 Mini
Single output
Up to 300 W
Current share option
3.62" x 4.39" x 0.78"[a]
(92,0 x 112,0 x 19,8 mm)
1 Maxi
Single output
Up to 600 W
Current share option
3.62" x 6.69" x 0.78"[a]
(92,0 x 170,0 x 19,8 mm)
2 Micros
Single or dual outputs
Up to 300 W total
3.62" x 4.39" x 0.78"[a]
(92,0 x 112,0 x 19,8 mm)
PlugMate version is 0.81" (20,5 mm) in height
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
31
DC-DC
Configurable Power Supplies
Web ExpressCode: compac
ComPAC Family 50 – 600 Watt Input Power System
RoHS
ComPAC delivers up to 600 W from one, two, or three outputs in a package
just 0.99” (25,2 mm) in height with the field proven performance, high
efficiency and high reliability inherent in Vicor’s component level power
converters. ComPAC meets British Telecom and European Norms for input
surge withstand and meets conducted emissions of EN55022, Class B.
ComPAC is offered with input voltage ranges optimized for industrial and
telecommunication applications and provides extended input overvoltage
capability, input reverse polarity protection, undervoltage lockout, and
master disable. ComPAC is available with BatMod current source
module, Page 23.
Conduction-cooled
models available
Features
Inputs: 24, 48, and 300 Vdc
Any output: 1 – 95 Vdc
Agency approvals:
cULus, cTÜVus, CE Marked
Efficiency: 80 – 90%
Up to 10 W/ in3
EMI / RFI specifications:
Telcordia TR-TSY-000513,
British Telecom BTR 2511
EN55022, Class B:
Conducted emissions
Input surge withstand:
British Telecom BTR 2511,
EN61000-4-5
Low-noise ZCS / ZVS power topology
Optional high-performance heat sink
Finned or conduction-cooled
package
MIL-COTS Version
Available
Page 37
Chassis Configurations
General Performance Refer to data sheet for specifications
Parameter
Designator
Rating
Unit
Input voltage range
1
21 – 32
Vdc
W
18 – 36
Vdc
3
42 – 60
Vdc
N
36 – 76
6
200 – 400
Outputs
1, 2 or 3
Output power
50 – 600
Output voltage(s)
1 – 95
Vdc
Vdc
Single output
50 – 200 Watts
9.25” x 2.5” x 0.99”
(234,8 x 63,5 x 25,2 mm)
Single or dual outputs
100 – 400 Watts
9.25” x 4.9” x 0.99”
(234,8 x 124,5 x 25,2 mm)
Single, dual, or
triple outputs
150 – 600 Watts
9.25” x 7.3” x 0.99”
(234,8 x 185,4 x 25,2 mm)
Watts
Vdc
Operating temperature (case)
E-Grade
–10 to +85
˚C
C-Grade
–25 to +85
˚C
I-Grade
– 40 to +85
˚C
M-Grade
–55 to +85
˚C
Part Numbering
VI
-
(VE) = RoHS
Compliant
N
Family
L = Single
M = Single
N = Single
P = Dual
Q = Dual
R = Triple
C
3
1
W
3
N
6
Input
= 24 V [c]
= 24 V
= 48 V
= 48 V
= 300 V
4
Out 1
Z = 2V
Y = 3.3 V
0 = 5V
X = 5.2 V
W = 5.5 V
V = 5.8 V
T = 6.5 V
R = 7.5 V
Out 2 [a]
Out 3 [b]
M = 10 V
K = 40 V
1 = 12 V
4 = 48 V
P = 13.8 V H = 52 V
2 = 15 V
F = 72 V
N = 18.5 V D = 85 V
3 = 24 V
B = 95 V
L = 28 V
J = 36 V
All voltages available for output 1, 2, or 3
C
Power 1
Grade
E = –10°C M = 600 W
C = –25°C P = 450 W
I = –40°C Q = 400 W
M = –55°C S = 300 W
U = 200 W
V = 150 W
W = 100 W
X = 75 W
Y = 50 W
Note: For conduction-cooled package add – CC to the part number. For example, VI –LWX–CV–CC.
32
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
M
Power 2 [a]
U = 200 W
V = 150 W
W = 100 W
X = 75 W
Y = 50 W
Power 3 [b]
U = 200 W
V = 150 W
W = 100 W
X = 75 W
Y = 50 W
[a]
For P, Q, R, PJ, and RJ only. Refer to
output configuration chart.
For R and RJ only. Refer to output
configuration chart .
[c] Max output power / module 150 W.
[b]
DC-DC
Configurable Power Supplies
Web ExpressCode: megamod
MegaMod Family Chassis–Mount VI-200 / VI-J00 Converters
RoHS
MegaMod and MegaMod Jr. DC-DC converters incorporate one, two, or
three Vicor VI-200 or VI-J00 converters in a modular package to provide a
chassis-mounted alternative to board-mounted power supplies. MegaMods
offer 50 – 600 W of power from 1 – 3 outputs. MegaMod Jrs. offer a total
of 25 – 300 W from 1 – 3 outputs. Each output may be independently
sensed, adjusted, and sequenced using the procedures outlined for VI-200
and VI-J00 converters in the Vicor Applications Manual. Download a PDF
of the manual from the library section of vicorpower.com.
Features
Inputs: 10 – 400 Vdc
Low noise ZCS / ZVS power topology
Any output: 1 – 95 Vdc
Agency approvals:
cULus, cTÜVus, CE Marked
Efficiency: 80 – 90% (typical)
Temperature grades (MegaMod Jr.):
E = –10 to +85°C (+100°C)
C = –25 to +85°C (+100°C)
I = –40 to +85°C (+100°C)
M = –55 to +85°C (+100°C)
Up to 27 W / in3
Low profile: 0.62" (15,7 mm) high
MIL-COTS Version
Available
Page 37
ZCS power architecture
Booster versions available for expanded
output power (MegaMod only)
Chassis Configurations
Input Selection
Package
MegaMod
4.9'' (124,4 mm)
Output Power
MegaMod Jr.
2.58'' (35,5 mm)
12
INPUT
MODEL
S/N
OUTPUT
MegaMODTM
MegaMOD Jr.
2.5''
(63,5 mm)
18
Single output
50 – 200 Watts — MegaMod: L
25 – 100 Watts — MegaMod Jr.: LJ
Single or dual outputs
100 – 400 Watts — MegaMod: M, P
50 – 200 Watts — MegaMod Jr.: PJ
Single, dual or triple outputs
100 – 600 Watts — MegaMod: N, Q, R
75 – 300 Watts — MegaMod Jr.: RJ
DC-DC Converter
24
INPUT
MODEL
S/N
OUTPUT
MegaMODTM
MegaMOD Jr.
36
DC-DC Converter
4.9''
(124,4 mm)
48
72
INPUT
MODEL
S/N
OUTPUT
MegaMODTM
MegaMOD Jr.
110
DC-DC Converter
150
7.3''
(185,4 mm)
300
150/300
Part Numbering
VI
-
(VE) = RoHS
Compliant
L
Family
L = Single
M = Single
N
P
Q
R
LJ
PJ
RJ
=
=
=
=
=
=
Single
Dual
Dual
Triple
Single
Dual
= Triple
1
3
Out 1
Input Voltage
0 =
V =
1 =
W=
2 =
3 =
N=
4 =
T =
5 =
6 =
7 =
12 (10-20)
24 (10-36)
24 (21-32)[c]
24 (18-36)
36 (21-56)
48 (42-60)
48 (36-76)
72 (55-100)
110 (66-160)
150 (100-200)
300 (200-400)
150 (100-375)
Z
Y
0
X
W
V
T
R
=
=
=
=
=
=
=
=
2V
3.3 V
5V
5.2 V
5.5 V
5.8 V
6.5 V
7.5 V
Out 2 [a]
M=
1 =
P =
2 =
N =
3 =
L =
J =
10 V
12 V
13.8 V
15 V
18.5 V
24 V
28 V
36 V
Out 3 [b]
K
4
H
F
D
B
=
=
=
=
=
=
40 V
48 V
52 V
72 V
85 V
95 V
All voltages available for output 1, 2, or 3
E
Grade
E =
C=
I =
M=
–10°C
–25°C
–40°C
–55°C
V
Power 1
M
P
Q
S
U
V
W
X
Y
Z
=
=
=
=
=
=
=
=
=
=
600 W
450 W
400 W
300 W
200 W
150 W
100 W
75 W
50 W
25 W
Power 2 [a]
Power 3 [b]
U
V
W
X
Y
Z
U
V
W
X
Y
Z
=
=
=
=
=
=
200 W
150 W
100 W
75 W
50 W
25 W
=
=
=
=
=
=
200 W
150 W
100 W
75 W
50 W
25 W
[a]
For P, Q, R, PJ, and RJ only. Refer to
output configuration chart.
For R and RJ only. Refer to output
configuration chart.
[c] Max output power / module 150 W
[b]
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
33
MIL-COTS
V•I Chips
Web ExpressCode: mvichips
DC-DC V•I Chip Modules 28 V Regulator, Voltage Transformer, & Bus Converter
VTMs put isolated current multiplication and voltage division directly at the point of
load (POL), and an upstream PRM (Regulator) controls the factorized bus voltage
supplied to the VTM to provide line and load regulation. Together, the PRM and VTM
chip set provides the full functionality of a DC-DC converter, but with breakthrough
performance and flexibility in a rugged, miniature package. The BCM (Bus Converter
Module) functions as a fixed-ratio DC-DC transformer and provides an isolated bus
voltage to power the PRM and VTM chip set or other loads.
The MIL-COTS PRM operates from a wide input range of 16 – 50 Vdc, meeting many
of the ground vehicle and airborne requirements of MIL–STD–1275 and MIL–STD–
704. Rated for 120 W, the 28 V PRM produces a nominal factorized bus voltage of
36 Vdc, controllable over the range of 26 – 50 Vdc. The downstream isolated VTM is
available with twelve voltage division ratios from 1:1 to 1:32 and provides the user
with flexibility to supply up to 100 A or 120 W at any output voltage from 1 – 50 Vdc
in a surface-mount package occupying only 1 in2. The MIL-COTS BCM is a high
efficiency Sine Amplitude Converter (SAC) operating from a 240 to 330 Vdc primary
bus to deliver an isolated 30 – 41.2 V nominal, unregulated secondary.
Features for PRM
Input range: 16 – 50 Vdc
1.3 MHz switching frequency
Efficiency: 95%
–55°C to +125°C operation (Tj)
ZVS buck-boost regulator
Features for VTM
Isolated 1–50 Vdc output
1 µs transient response
3 MHz switching frequency
Efficiency: Up to 96.5%
–55 to +125°C operation (Tj)
Features for BCM
Input range: 240 – 330 Vdc
Output range: 30.0 – 41.2 Vdc
MIL-STD-704E/F Compliant
Efficiency: >95%
–55 to +125°C operation (Tj)
MIL-COTS VI BRICKs PRM / VTM Thermally Enhanced Package
Web ExpressCode: mvib
The PRM Regulator Module is a very efficient non-isolated
regulator specifically designed to provide a controlled Factorized
Bus distribution voltage for powering downstream VI BRICK
Voltage Transformation Modules. In combination, VI BRICK PRMs
and VTMs form a complete DC-DC converter subsystem offering
all of the unique benefits of Vicor’s Factorized Power
Architecture (FPA): high density and efficiency;
low noise operation; architectural flexibility;
extremely fast transient response;
elimination of bulk capacitance at
the point of load (POL); in a thermally
enhanced package.
The thermally enhanced VTM voltage transformer excels
at speed, density and efficiency to meet the demands of
advanced power applications. Combined with the PRM
regulator they create a DC-DC converter with flexibility to
provide isolation and regulation where needed. The PRM
can be located with the VTM at the
point of load or remotely in the back
plane or on a daughtercard.
MQPI-18 Input EMI Filter
MIL-COTS Product Catalog
The MQPI-18 is a surface mount DC front-end
filter that provides EMI filtering for Vicor’s 28 V
DC-DC V•I Chip or VI BRICK modules. The
MQPI-18 enables designers to meet conducted
emission / conducted susceptibility per MILSTD-461E. The MQPI-18 accepts an input
voltage of 10 – 80 Vdc and delivers output
current up to 7 A.
This document provides in-depth information on Vicor's line of
MIL-COTS standard products, including DC-DC converters,
custom solutions, and technical support.
34
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
Environmental stress screening and MTBF
Environmental qualification
Custom configured modules
Field tested... proven reliability
Visit vicorpower.com
to view the Military Catalog online.
This will give you instant access to all
technical documentation for a
MIL-COTS product.
MIL-COTS
BRICKs / Front ends
Maxi, Mini & Micro Series DC-DC Converter Modules
Web ExpressCode: mbricks2
These high-density DC-DC power converters are available in three rugged
packages with output power up to 600 W. Standard inputs of 24, 28, 48,
72, 110, 150, 300, and 375 Vdc; and outputs from 1 – 48 Vdc, make
these converters extremely flexible for MIL-COTS applications.
Features
Inputs: 24, 48, 300, and 375 Vdc
NEW: 72, 110, 150, and wide input 28 Vdc
Two operating temperature ratings:
– 40 to +100°C and –55 to +100°C
MIL-STD-810 and MIL-STD-202 qualified
Environmental stress screening
Final test data available at
vicorquality.com
MI-200 & MI-J00 Series DC-DC Converter Modules
Web ExpressCode: mbricks1
Vicor’s field-proven MIL-COTS power components have gained a reputation for
quality and reliability among military power system designers. With thousands of
standard models available, designers can rapidly meet performance, schedule,
and budget objectives for just about any power solution.
Features
Inputs per MIL-STD-704D/E/F: 28 and 270 Vdc
Input per MIL-STD-1399A: 155 Vdc
Output voltages: 2 – 48 Vdc
Output power: 10 – 100 W
MIL-STD-810 and MIL STD-202 qualified
NAVMAT component derating guidelines
Power density: Up to 25 W/in3
75 and 100 W booster modules available
MI-AIM AC Front-end Module
Web ExpressCode: maim
The MI-AIM works in conjunction with Vicor’s MI-x7x module family and is
ideal for systems requiring AC rectification and transient protection.
Features
115 Vac nom, 60/400 Hz operation
MIL-STD-461D EMI (CE102) @ 60 Hz
MIL-STD-704A transient protection
MIL-STD-810 and MIL-STD-202 qualified
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
35
MIL-COTS
Filters
Web ExpressCode: muram
MicroRAM Output Ripple Attenuator Module
Vicor’s MicroRAM output ripple attenuation module combines both active and passive
filtering to achieve greater than 40 dB of noise attenuation from 60 Hz to 1 MHz. The
MicroRAM operates over a range of 3 – 30 Vdc, is available in either 20 or 30 A models,
and is compatible with all Vicor DC-DC converters.
Features
>40 dB ripple attenuation from 60 Hz to 1 MHz
20 and 30 Amp ratings
Operation: –55°C
Input: 3 – 30 Vdc
M-FIAM Filter Input Attenuator Module
Web ExpressCode: mfiam
The M-FIAM is a DC front-end module that provides EMI filtering and transient protection.
The M-FIAM3 and 5B enables designers using Vicor 24 and 300 V Maxi, Mini and Micro
DC-DC converters to meet conducted emission / susceptibility per MIL-STD-461E and input
transients per MIL-STD-704E/F. The M-FIAM7, compatible with 28 Vdc V•I Chip modules,
and the M-FIAM9, compatible with Vicor’s V24 and V28 DC-DC converters, are compliant
to MIL-STD-461E, MIL-STD-704A-F, MIL-STD-1275A/B/D and DO-160E.
Features
M-FIAM3, M-FIAM5B & M-FIAM9
MIL-STD-461E conducted emissions / susceptibility
MIL-STD-704E/F transient protection
MIL-STD-704A-F & MIL-STD-1275A/B/D transient protection (M-FIAM9)
Compatible with 24, 28 & 300 Vdc input Maxi, Mini & Micro DC-DC converters
M-FIAM7
MIL-STD-461E conducted emissions / susceptibility
MIL-STD-704A-F, MIL-STD-1275A/B/D & DO-160E transient protection
Compatible with 28 Vdc V•I Chip modules
MVA-FIAM5B & MVA-FIAM9
Coldplate connector mounting option for M-FIAM5B and M-FIAM9
MI-IAM Input Attenuator Module
The MI-IAM provides EMI filtering to MIL-STD-461C/D/E and transient
protection to the most severe levels of MIL-STD-704A-F, MIL-STD-1275A/B/D
and DO-160E using MI-200 or MI-J00 DC-DC converters.
Features
36
Input: 28 or 270 Vdc
MIL-STD-704A-F, MIL-STD-1275A/B/D
& DO-160E transient protection
MIL-STD-461C/D/E conducted emissions / susceptibility
MIL-STD-810 and MIL-STD-202 qualified
Compatible with MI-200 and MI-J00 DC-DC converters
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
Web ExpressCode: miam
MIL-COTS
Configurable Power Supplies
Web ExpressCode: mmega
MI-MegaMod Family Chassis-Mount DC-DC Converter
DC input power converters delivering up to 300 W from one, two, or three
outputs in a package just 0.62" in height.
Features
Standard inputs: 28, 155 & 270 Vdc
Power density: Up to 13.5 W/in3
Output voltages: 2 – 48 Vdc
1, 2 or 3 outputs: Up to 300 W
Web ExpressCode: mcompac
MI-ComPAC DC-DC Configurable Power Supply
The MI-ComPAC is a complete single, dual, or triple output DC-DC power
supply that delivers up to 300 W from inputs of 28 or 270 Vdc.
Features
Complete single, dual, or triple output power
supply 50 – 300 W
MIL-STD-461C/D/E conducted
emissions / susceptibility
MIL-STD-704A-F, MIL-STD-1275A/B/D
& DO-160E transient protection
Conduction-cooled models available
MIL-COTS VIPAC Arrays Chassis Mount DC-DC Converter
Web ExpressCode: mvipacary
VIPAC Arrays are a highly flexible input power systems that can be configured
with up to four user-defined outputs, with power capability, up to 650 W.
Features
Inputs: 24, 28 & 300 Vdc
–55°C operation
Configurable multi outputs; Up to 650 W
MIL-STD-810F shock & vibration
28 Vdc MIL-COTS VIPAC DC-DC Configurable Power Supply
Web ExpressCode: mvipac
The 28 Vdc VIPAC can be specified with up to 3 outputs in a choice of
connections with voltages as low as 3.3 Vdc to as high as 48 Vdc and power
levels from 50 to 400 watts per output for MIL-COTS applications.
Features
28 Vdc input
–55°C operation
MIL-STD-704A-F and MIL-STD-1275A/B/D
input transient protection
Profile as low as 0.75 in. (19,0 mm)
MIL-STD-810F shock & vibration
MIL-STD-461E EMI compliance
Web ExpressCode: vme450
VME450™ DC-DC Configurable Power Supply
Powered with Vicor V•I Chips, this single-slot VME power supply is small,
light weight and very efficient.
Features
28 Vdc input
4 output voltages, 550 W
MIL-STD-704A-F and MIL-STD-1275A/B/D
input transient protection
-40°C to +85°C
MIL-STD-461E EMI compliance
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
37
AC-DC Westcor Division
Configurable Power Supplies
Web ExpressCode: lopac
LoPAC Family Switcher Power Supplies
RoHS
The LoPAC Family consists of three power supplies available as one-, two-,
or three-slot packages. For maximum flexibility, they are configured with
standard Vicor DC-DC converters. These modules cover the entire range of
outputs from 2 – 95 Vdc (higher through series arrays) and 25 – 600 W per
output, as well as an array of non-standard voltages. Depending on
the configuration, the LoPACs can provide up to six user-specifiable
isolated outputs.
PFC Mini
PFC Micro
Features
Near unity power factor
Power factor corrected
Output power: Up to 1,500 W
Up to 6 user-specifiable outputs
Power density: Up to 11 W/in3
Fan cooled
MIL- STD-810E-Vibration
(PFC Mini)
Agency approvals:
UL, cTÜVus, CE Marked
PFC MicroS
LoPAC Family
Accessories
Choice of full, half,
or quarter brick
Configure Your LoPAC Online
Page 52
PO
ERBENCH
vicorpower.com/vspoc
General Performance Refer to data sheet for detailed specifications
Product
Dimensions
Input
Voltage
Number
of Slots
Number
of Outputs
Maximum Output Power
@ 230 Vac
@ 115 V
Modules
per Slot
PFC Mini
12.2” x 6” x 1.72”
(309,9 x 152,4 x 43,6 mm)
85 – 264 Vac
100 – 380 Vdc
3
6
1,500 W
800 W
1 Full or 2 Half
PFC Micro
10.4” x 5.06” x 1.86”
(264,1 x 128,5 x 47,3 mm)
85 – 264 Vac
100 – 300 Vdc
2
6
800 W
500 W
1 Full or 2 Half
or 3 Quarter
PFC MicroS
7.95” x 5.06” x 1.86”
(201,9 x 128,5 x 47,3 mm)
85 – 264 Vac
100 – 300 Vdc
1
3
600 W
500 W
1 Full or 2 Half
or 3 Quarter
Note: For detailed information, review specific product design guides available online at vicorpower.com
Part Numbering Ordering, see back cover for contacts
PM
Product Prefix
PM = PFC Mini
PC = PFC Micro
PS = PFC MicroS
[a]
X1
–
Number of Outputs
1–6
X2
X3
X4 – XXXX
Number of
VI-200 / VI-J00
Series Modules
Number of
Maxi, Mini or Micro
Series Modules
Optional Factory
Assigned
Factory
Assigned
-X5
-X6
Optional Factory
Assigned
2 = FasTrak[a]
G = RoHS
Optional Codes
LL = Low Leakage[a]
QF = Quiet Fan[a]
PFC Mini Only
Standard Single-Output Configurations
Vout
Amps
Watts
PFC Micro [c]
PM1-03B-48-2
48
31.2
1,500
PM1-03B-28-2
28
53.6
PM1-03B-24-2
24
62.5
PM1-03B-15-2
15
PM1-03B-12-2
PM1-03B-05-2
PFC Mini [b]
[b]
PFC MicroS [d] Vout
Vout
Amps
Watts
PC1-02B-48
48
16.7
800
PS1-01-48
1,500
PC1-02B-28
28
28.6
800
1,500
PC1-02B-24
24
33.3
800
100
1,500
PC1-02B-15
15
53.3
12
125.0
1,500
PC1-02B-12
12
5
240.0
1,200
PC1-02B-05
5
Replace -2 with -G for RoHS compliant
[c]
Amps
Watts
48
12.5
600
PS1-01-28
28
21.4
600
PS1-01-24
24
25.0
600
800
PS1-01-15
15
40.0
600
66.7
800
PS1-01-12
12
50.0
600
160.0
800
PS1-01-05
5
80.0
400
Add -G to end of part number for RoHS compliant
[d]
Add -G to end of part number for RoHS compliant
VANTAGE Line – Westcor’s Affordable Power Supply Option
Get the Westcor “advantage” of complete power supplies at a 15% discount. Westcor’s VANTAGE Line of power supplies was developed with all of the user configurability,
field configurability, power density, and high efficiency that Westcor offers and with only minor specification changes. Call a local Vicor Representative, or for your nearest
Rep location go to vicorpower.com//company/contact_us
38
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
AC-DC Westcor Division
Configurable Power Supply
Web ExpressCode: flatpacen
FlatPAC-EN Power Supply
RoHS
The FlatPAC-EN is capable of providing up to 500 W (425 W for EN
compliance) from up to four isolated outputs. The FlatPAC-EN can be
configured with standard Vicor DC-DC converter modules. Like all other
configurable power supplies offered by Vicor, the optimum FlatPAC-EN
solution can be factory configured based on the exact voltage and power
requirements of the customer.
Features
EN61000-3-2 harmonic current compliance
Agency approvals: UL, cTÜVus, CE Marked
Output power: Up to 500 W
(425 W for EN compliance)
Power density: >7 W/in3
Choice of full-, half- and quarter-brick
modules with outputs from 2 – 95 Vdc and
25 – 500 watts, as well as an array of
non-standard output voltages
Ultra low profile: 1.4" (35,6 mm) height
RS-232 microcontroller interface
Rugged: Meets MIL-STD-810E,
category 10 for vibration
FlatPAC-EN
Accessories
Page 52
Conduction or convection cooled
(same model)
General Performance Refer to data sheet for detailed specifications
Product
FlatPAC-EN
Dimensions
Input Voltage
Output Power
Number of Outputs
9.2” x 5.0” x 1.4”
(233,7 x 127 x 35,6 mm)
90 – 132 / 180 – 264 Vac
250 – 380 Vdc
500 W
(425 W for EN compliance)
1–4
Part Numbering Ordering, see back for phone numbers
FL
X1
Product Prefix
FL = FlatPAC-EN
Number of
Outputs
1–4
–
X2
X3
-
XXXX
Factory
Assigned
Number of
Number of
VI-200 / VI-J00 Maxi, Mini or Micro
Series Modules
Series Modules
-X4
-X5
Optional Factory
Assigned
G = RoHS
Configure Your
FlatPAC-EN Online
Optional Codes
PO
ERBENCH
vicorpower.com/vspoc
Layout Configurations
MBJ1
Input Conn.
MBJ1
Input Conn.
CBJ1
Interface Conn.
Single or Dual Outputs
Assumes either a full brick
and / or half brick is used.
M2
MiniHAM
M1
VI-J00
or
Mini
VI-200,
Maxi
or
Batmod
Stud Connectors
For a single output
configuration,
either M1 or M2 is used.
CBJ1
Interface Conn.
M3
MiniHAM
VI-J00
or
Mini
M1
M2
VI-J00
or
Mini
VI-J00
or
Mini
MBJ1
Input Conn.
Triple Outputs
Assumes only half
bricks are used.
Two 18-pin
Molex Connectors.
CBJ1
Interface Conn.
M4
VI-J00
or
Mini
MiniHAM
M1
M2
M3
Micro
Micro
Micro
Quadruple Outputs
Assumes only half
and / or quarter bricks
are used. Two 18-pin
Molex Connectors.
Note: The type of output connector a FlatPAC-EN has depends on which modules are used. For example, if a two output configuration
uses two half bricks (instead of a full brick and half brick) this two output configuration will have the 18 pin Molex connectors, not stud connectors.
VANTAGE Line – Westcor’s Affordable Power Supply Option
Get the Westcor “advantage” of complete power supplies at a 15% discount. Westcor’s VANTAGE Line of power supplies was developed with all of the user configurability,
field configurability, power density, and high efficiency that Westcor offers and with only minor specification changes. Call a local Vicor Representative, or for your nearest
Rep location go to vicorpower.com/company/contact_us
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
39
AC-DC Westcor Division
Configurable Power Supply
Web ExpressCode: megapac
MegaPAC Family User & Field Configurable Power Supplies
RoHS
The MegaPAC family consists of eight fan-cooled, configurable power
supplies that enable users to factory configure almost any set of output
requirements by combining appropriate slide-in output assemblies called
ConverterPACs, with the appropriate chassis. The MegaPAC chassis has
a standardized feature-laden front end with slots to accept the
ConverterPACs. Models are available with single or three-phase AC
inputs. MegaPACs will also operate from high-voltage DC input. Features
include EMI / RFI filtering, enable / disable, general shut down, output
sequencing and AC OK.
Features
MegaPAC Family
Accessories
Output power: 200 – 4,000 Watts
Fan cooled
User-configurable outputs
Efficiency: >80%
Up to 20 outputs
Agency approvals: UL, cTÜVus, CE Marked
DC input capability
Low leakage option available (some models)
Power factor corrected (some models)
Current sharing available
Low ripple 10 mV p-p or 0.15%,
whichever is greater (some models)
Page 52
Configure Your
MegaPAC Online
PO
ERBENCH
vicorpower.com/vspoc
General Performance Refer to data sheet for detailed specifications
Product
Mini
MegaPAC
Dimensions
Input Voltage
Output Power
# of Outputs Slot Configurations
9.5" x 6.0" x 3.4"
90 – 132/180 – 264 Vac; Strappable
(241,3 x 152,4 x 86,4 mm)
260 – 380 Vdc
1,000 W @ 115 Vac
or 230 Vac
1 – 10
(5 slots)
ModuPAC, JrPAC,
DualPAC, RAMPAC, BatPAC
Autoranging
MegaPAC
11.9" x 6.0" x 3.4"
(302,3 x 152,4 x 86,4 mm)
90 – 132/180 – 264 Vac
260 – 380 Vdc
1,200 W @ 115 Vac
1,600 W @ 230 Vac
1 – 16
(8 slots)
ModuPAC, JrPAC,
DualPAC, RAMPAC, BatPAC
4 kW
MegaPAC-EL
17.0" x 7.5" x 4.9"
(431,8 x 190,5 x 124,5 mm)
208 or 240 Vac; 3-Phase
260 – 352 Vdc
2,000 W – 4,000 W, (3Ø)
1,500 W, (1Ø)
1 – 20
(10 slots)
QPAC, DualQPAC,
JrQPAC, QPAC (XQ)
PFC
MegaPAC/HP
12.3" x 6.0" x 3.4"
(312,4 x 152,4 x 86,4 mm)
85 – 264 Vac
100 – 380 Vdc
1,200 W @ 115 Vac
2,400 W @ 230 Vac
1 – 13
(8 slots)
BatPAC, ModuPAC, JrPAC,
DualPAC, RAMPAC, FinPAC
PFC
15.6" x 6.0" x 3.4"
MegaPAC-EL/HPEL (396,2 x 152,4 x 86,4 mm)
85 – 264 Vac
100 – 380 Vdc
1,200 W @ 115 Vac
2,400 W @ 230 Vac
1 – 13
(8 slots)
QPAC, DualQPAC,
JrQPAC, FinQPAC
208 or 240 Vac; 3-Phase
260 – 352 Vdc
2,000 W – 4,000 W, (3Ø)
1,500 W, (1Ø)
1 – 20
(10 slots)
ModuPAC, JrPAC, DualPAC,
RAMPAC, BatPAC, UniPAC
4 kW
MegaPAC
14.0" x 7.5" x 4.9"
(355,6 x 190,5 x 124,5 mm)
Note: For detailed information, review specific product design guides available online at vicorpower.com
Part Numbering Ordering, see back cover for contacts
MP
Product Prefix
MP = Chassis using VI-200 / VI-J00 Series
Modules only
MX = Chassis using VI-200 / VI-J00 Series
and / or Maxi Series Modules only
MM = Chassis using VI-200 / VI-J00 Series
Modules only (Strappable)
X1
Number
of Outputs
1 – 20
–
X2
X3
Chassis Type
1 = 115 – 230 Vac
Strappable
Number
of
Modules
XXXX -X4 X5
Factory
Assigned
4 = 3-Phase
7 = PFC
9 = Autoranging
Optional
Codes
4 kW
MegaPAC
and
MegaPAC-EL
only
-X6
Optional
Codes
2 = FasTrak
G = RoHS
-X7
Optional Codes
E L = Extended Length
LL = Low Leakage
VANTAGE Line – Westcor’s Affordable Power Supply Option
Get the Westcor “advantage” of complete power supplies at a 15% discount. Westcor’s VANTAGE Line of power supplies was developed with all of the user configurability,
field configurability, power density, and high efficiency that Westcor offers and with only minor specification changes. Call a local Vicor Representative, or for your nearest
Rep location go to vicorpower.com//company/contact_us
40
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
AC-DC Westcor Division
Configurable Power Supplies
Web ExpressCode: cpacs
ConverterPACs Output Power Up to 600 Watts
ConverterPACs incorporate VI-200 or VI-J00 and / or Maxi Vicor DC-DC
converter bricks. For additional power, ConverterPACs can be paralleled.
Some ConverterPACs are available for low-noise applications (VXI options,
RamPACs and QPACs) and as current sources (BatPACs). All ConverterPACs
can be easily removed in the field by loosening a single screw and sliding
the unit out of the chassis.
VI-200 / VI-J00 ConverterPACs
[a]
Web ExpressCode: cpacs1
Output Power Up to 200 Watts
For general electrical specifications for VI-200 / VI-J00 ConverterPACs,
see module specifications on the VI-200 / VI-J00 data sheets in the
library section of our website.
ModuPAC (M)
JuniorPAC (J)
RamPAC (R)
BatPAC (B)
Up to 200 W
Up to 100 W
Up to 100 W
Up to 200 W
programmable current source
DualPAC (D)
QPAC (L)
DualQPAC (LD)
JrQPAC (LJ)
Dual outputs:
Up to 100 W / output
Up to 200 W
Up to 100 W / output
Up to 100 W
Maxi ConverterPACs
[a]
Web ExpressCode: cpacs2
Output Power Up to 600 Watts
For general electrical specifications for Maxi ConverterPACs, see module
specifications on the data sheets in the library section of our website.
[a]
UniPAC (XU)
FinPAC (PZ)
QPAC (XQ)
FinPAC (PZL)
Up to 500 W
Up to 600 W
Up to 500 W
Up to 600 W
RoHS compliant ConverterPACs have a"G" added to their prefix (except the PZL where the RoHS version will be GPL).
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
41
Vicor CUSTOM
Web ExpressCode: custom
Custom Power Solutions
Designed To Fit
Your Specific Needs
Small company responsiveness,
large company resources
The sole focus of Vicor Custom Power is designing and manufacturing
turnkey custom power systems. Our custom power design centers maintain
the flexibility of small entrepreneurial companies while taking advantage of
Vicors technical and business resources to deal effectively with your most
challenging power problems. Our total focus is on the power solution
that best satisfies your needs.
Providing custom power solutions for:
COMMUNICATIONS
INDUSTRIAL
DATACOM
TEST EQUIPMENT
MEDICAL
MILITARY / AEROSPACE
TRANSPORTATION
Custom Power Design Centers:
Aegis Power Systems
Freedom Power Systems
Mission Power Solutions
Tel: 1 828 837 4029
email: [email protected]
aegispower.com
Tel: 1 512 259 0941
email: [email protected]
freedompower.com
Tel: 1 760 631 6846
email: [email protected]
mpwrs.com
ConverTec Corporation
Granite Power Technologies
Northwest Power Integrations
Tel: 1 651 604 0289
email: [email protected]
Tel: 1 603 623 3222
granitepower.com
Tel: 1 503 652 6161
email: [email protected]
npi-inc.com
Locations: See our website page for complete details
Northwest
Power Integrations
Milwaukie, OR
Granite Power
Technologies
ConverTec
Corporation
Manchester, NH
Roseville, MN
Aegis
Power Systems
Murphy, NC
Freedom
Power Systems
Mission
Power Solutions
Cedar Park, TX
Oceanside, CA
42
U.S. & CANADA: 800-496-5570 VICORCUSTOM.COM
Consult back cover for a complete list of contacts.
Vicor CUSTOM
Capabilities Overview
Web ExpressCode: custom
Vicor Custom Power has the capability to design, prototype,
mass produce and certify a complete power system.
Design: Electrical and mechanical
Prototype: By utilizing Vicor’s standard power components,
delivery of prototype units can be very fast and
in some cases, just a matter of weeks.
Mass production: Capacity to manufacture thousands of power
systems per year.
Reliability / Certification: HALT (Highly Accelerated Life Test)
Temperature Cycling
Burn In
Thermal Shock
Humidity
Accelerated Life Test
Power Cycling
Vibration
EMI
Transient Immunity
Altitude
Explosive Atmosphere
Mechanical Shock
Acceleration
U.S. & CANADA: 800-496-5570 VICORCUSTOM.COM
Consult back cover for a complete list of contacts.
43
Vicor Custom
Off-the-Shelf Configurable Power Supplies
Web ExpressCode: vme450
VME450™ From Aegis Power Systems
The single-slot VME450 power supply — filtered 28 Vdc, four output (3.3,
5, ±12 V), 550 W — is a MIL-COTS solution that is compliant to the
vibration requirements of MIL-STD-810F and EMI per MIL-STD- 461E.
When compared to VME power supplies using conventional technology,
the one-slot VME450 provides users with higher efficiency (85%), lower
weight (2.4 pounds), and higher power (up to 550 W).
Features
28 Vdc per MIL-STD-704F
Output power: 550 W
28 Vdc per MIL-STD-1275D
4 isolated outputs
Vin max range: 18 – 36 Vdc
Temperature: –40 to +85˚C
MIL-STD-461E conducted EMI
Utilizes Vicor’s V•I Chips
Input power: 650 W
Single slot VME
DC-DC MegaPAC™ From Mission Power Solutions
Web ExpressCode: dcmegapac
The DC MegaPAC allows users to instantly configure highly-efficient DC-DC
power supplies. A complete power supply is configured by selecting and
inserting up to eight slide-in output assemblies called "ConverterPACs".
ConverterPACs incorporate one or two Vicor DC-DC converters and are
available in a wide array of outputs and power levels. If output requirements
change, the user can simply unlock a single screw and replace the slide-in
ModuPAC assembly with one that has the desired rating.
Features
DC inputs: 12 – 72 V available
Conducted EMI meets BTR 2511
Output power: Up to 16 outputs
and 1,600 W total power
(depending upon input voltage)
Remote sense capability and output
overcurrent protection on all outputs
Output overvoltage protection on most outputs
Temperature rating:
Full power to 45°C; half power to 65°C
Output overtemperature protection on all outputs
Input over, under and reverse voltage protection
Box-to-box paralleling capability
Input temperature monitor, warning and shut down
CE Marked
Dimensions: 3.4"H x 6.0"W x 12.0"L
(86,3 x 152,4 x 304,8 mm)
9.25 lbs. fully configured
Fan cooled
Soft start for limiting inrush current
44
U.S. & CANADA: 800-496-5570 VICORCUSTOM.COM
Consult back cover for a complete list of contacts.
Vicor Custom
Off-the-Shelf Configurable Power Supplies
Web ExpressCode: badger
Badger™ From Mission Power Solutions
The Badger is a rugged PFC multi-output power supply, capable of
withstanding extreme environments and stresses often inherent with
military applications.
General Specifications Typical unless otherwise noted
Product
Badger
Dimensions
2.55” x 7.0” x 13.75”
(64,8 x 177,8 x 349,3 mm)
Input
Voltage
Max #
of Outputs
Maximum
Power
Cooling
85 – 264 Vac
12
1,800 W
Internal fans
Notes
OCP, OVP, and OTP on all outputs
Web ExpressCode: javelin
Javelin™ From Mission Power Solutions
The Javelin is an AC input power supply with a single DC output, capable of up
to 5,400 W, in a rugged package suitable for industrial and military applications.
General Performance Refer to data sheet for detailed specifications
Product
Dimensions
Input
Voltage
Max #
of Outputs
Maximum
Power
Cooling
Javelin I
4.9” x 7.0” x 10.75”
(124,5 x 177,8 x 273,05 mm)
85 – 254 Vac
1
600 – 1,800 W
Internal fans
Javelin II
4.9” x 7.0” x 9.5”
(124,5 x 177,8 x 241,3 mm)
85 – 254 Vac
1
600 – 1,800 W
No fan
Javelin III
7.0” x 16.0” x 13.0”
(177,8 x 406,4 x 330,2 mm)
85 – 254 Vac
3-Phase
1
1,800 – 5,400 W
Internal fans
Web ExpressCode: powerbank
PowerBank™ From Northwest Power Integrations
The PowerBank is a low-profile AC-DC switching power supply that offers
up to six configurable outputs at up to 1,500 Watts.
General Performance Refer to data sheet for detailed specifications
Product
Dimensions
Input
Voltage
Max #
of Outputs
Maximum
Power
Cooling
Notes
PB1004PFC
1.74” x 8.08” x 10.28”
(44,2 x 205,2 x 261,1 mm)
85 – 264 Vac
4
1,000 W
Internal fans
Low power stand-by output
PB1005AC
1.68” x 7” x 10.5”
(42,7 x 177,8 x 266,7 mm)
115/230 Vac
300 Vdc
5
1,000 W
Internal fans
SEMI F47 compatible
PB1506PFC
1.75” x 12.6” x 16.84”
(44,5 x 320,04 x 427,7 mm)
90 – 264 Vac
6
1,500 W
Internal fans
Two aux. low power outputs
PBC1002AC
2.5” x 7.38” x 9”
(63,5 x 187,5 x 228,6 mm)
115/230 Vac
2
1,000 W
Cond., conv., liquid
Customizable baseplate / heat sink
PBC1002PFC
2” x 6.5” x 13.5”
(50,8 x 165,1 x 342,9 mm)
90 – 264 Vac
2
1,000 W
Cond., conv., liquid
Customizable baseplate / heat sink
U.S. & CANADA: 800-496-5570 VICORCUSTOM.COM
Consult back cover for a complete list of contacts.
45
Evaluation Boards
V•I Chip Products
Web ExpressCode: bcmeb
V•I Chip BCM
The BCM Evaluation Board has been designed to facilitate the verification of
the V•I Chips superior performance in the areas of power density, efficiency
(over a wide load range), fast response and quiet, low-noise operation.
Adding the suffix "EB” to the BCM model number designates the Evaluation
Board. For example the B048F120T30-EB specifies a 48 V to 12 V at 300 W
BCM mounted to an Evaluation Board.
RoHS
Example Number
B048F120T30-EB
Web ExpressCode: viceb
PRM & VTM
The PRM and VTM Evaluation Boards allow the user to develop an
understanding of Factorized Power Architecture (FPATM) using the PRM
and VTM chip set. Simply select the PRM Evaluation Board to match your
input voltage and VTM Evaluation Board to provide the desired output
voltage and current and plug them together.
Example Number
P045F048T32AL-CB
RoHS
Example Number
V048F040T050-CB
Web ExpressCode: bcmpb
High Voltage BCM
The HV BCM Evaluation Board is used for powering, testing and evaluating
the 380 Vdc input BCMs. The HV BCM Evaluation Board is available as a
Parallel Array Board with a 12 Vdc, 100 A output or as a Series Array Board
with a 48 Vdc 25 A and / or 12 Vdc, 25 A with up to 1,200 Watts total.
RoHS
Parallel Array
Example Number
B384F120T30-PB
Web ExpressCode: prmcc
PRM Constant Current Board
The PRM Constant Current (CC) Demonstration Board is suitable for light-emitting
diode (LED) applications such as street & stadium lighting, high-end projectors, active
outdoor advertising and architectural installations. The board provides a precisely
regulated current as required for direct drive multi-LED applications where the
intensity and brightness are controlled by regulating the current through the LEDs.
Evaluation Boards
VI BRICK evaluation boards are available to verify the performance and simplify testing of VI BRICK
modules. There are separate boards for the VI BRICK – PRM, VTM, BCM, and DC-DC converters.
VI BRICK PRM evaluation board
VI BRICK VTM evaluation board
VI BRICK BCM evaluation board
VI BRICK DC-DC evaluation board
46
Part Number
}
Add "-CB" suffix to the
VI BRICK specific part #
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
Example Number
P048F048T24AL-CC
DC-DC VI BRICK Products
VI BRICK
Description
RoHS
Web ExpressCode: vibeb
RoHS
Evaluation Boards
DC-DC Brick / EMI Filters / Output Filters & Cool-ORing Products
Web ExpressCode: mmmeb
Maxi, Mini & Micro
Three styles: Maxi, Mini or Micro
Inboard and onboard compatible
Easy I /O and control connections
Includes fusing and capacitors
Can be paralleled for higher power arrays
RoHS
Description
Maxi board style
Mini board style
Micro board style
Part Number
24644R
24645R
24646R
QPI Active EMI Filters & V•I Chip Optimized Filters
Web ExpressCode: qpieb qpoeb
The QPI / QPO filter evaluation boards provide a quick and easy way to evaluate the EMI /
EMC performance of the filters with a broad range of DC-DC converters. Available QPI
input EMI filter boards include: boards compatible with V•I Chip evaluation boards, DOSA
pin-out compatible evaluation boards, and universal style use “EVAL1” evaluation
boards. QPO output ripple attenuator boards are available in a universal “EVAL1”
configuration or with sockets compatible with Vicor Mini and Micro DC-DC converters.
Part Number
Description
[a]
QPI-3-CB1 ......QPI-3LZ for 24 V input DC-DC up to 7 A
QPI-4-CB1[a] ......QPI-4LZ for 48 V input DC-DC up to 7 A
QPI-5-CB1[a] ......QPI-5LZ for 24 V input DC-DC up to 14 A
QPI-6-CB1[a] ......QPI-6LZ for 48 V input DC-DC up to 14 A
QPI-7-CB1[a] ......QPI-7LZ for 24 V input DC-DC up to 6 A, w/ integrated Hot-Swap
QPI-8-CB1[a] ......QPI-8LZ for 48 V input DC-DC up to 6 A, w/ integrated Hot-Swap
[a]
The part numbers above are compatible with mounting DOSA compliant DC-DC converters.
For universal plug in evaluation boards substitute CB1 with EVAL1.
QPI V•I Chip Optimized Filter Evaluation Boards
QPI-9-CB1.........QPI-9LZ for 24 V input V•I Chips up to 6 A, w/ integrated Hot-Swap
QPI-10-CB1.......QPI-10LZ for 48 V input V•I Chips up to 6 A, w/ integrated Hot-Swap
QPI-11-CB1.......QPI-11LZ for 24 V input V•I Chips up to 7 A
QPI-12-CB1.......QPI-12LZ for 48 V input V•I Chips up to 7 A
MQPI MIL COTS V•I Chip Optimized Filter Evaluation Board
MQPI-18-CB1....MQPI-18LP for 28 V input V•I Chips up to 7 A
QPO Active Output Filters
Part Number
Description
QPO-1-EVAL1....QPO-1LZ, 3 – 30 V input up to 10 A
QPO-1-EVAL3....QPO-1LZ, board with sockets for Vicor Mini DC-DC converter
QPO-1-EVAL5....QPO-1LZ, board with sockets for Vicor Micro DC-DC converter
QPO-2-EVAL1....QPO-2LZ, 0.5 – 5.5 V input up to 20 A
Cool-ORing Discrete & Full-Function Active ORing Solutions
Web ExpressCode: coreb
The Cool-ORing evaluation boards offer a quick and easy way for the user to complete
functional testing of Picor’s Cool-ORing solutions. These evaluation boards demonstrate
solutions satisfying a range of Active ORing requirements, covering several typical
redundant bus voltages. The user can chose to evaluate a discrete implementation or a
high density integrated solution depending on system level requirements. The user can
use the evaluation board to measure steady state efficiency as well as test dynamic
performance of the Cool-ORing product under system level fault conditions.
Part Number
Description
PI2001-EVAL1
PI2002-EVAL1
PI2003-EVAL1
PI2121-EVAL1
PI2122-EVAL1
PI2125-EVAL2
PI2001 using 3 x 3 mm TDFN package & SO-8 MOSFET in high-side configuration
PI2002 using 3 x 3mm TDFN package and back-to-back SO-8 MOSFETs in high-side configuration
PI2003 using 3 x 3 mm TDFN package and 100V SO-8 MOSFET in low-side configuration
PI2121 configured for a high-side ground referenced application
PI2122 Active ORing with load disconnect
PI2125 configured for a high-side floating application
NOTE: Both PI2121-EVAL1 and PI2125-EVAL2 are compatible with the PI2123 solution.
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
47
ACCESSORIES
Web ExpressCode: mounting1
Mounting & Thermal Management
All parts are RoHS compliant unless otherwise noted
Transverse Fins
0.90" Fin
(22,8 mm)
30089
0.90" Fin
(22,8 mm)
30090
Longitudinal Fins
Transverse Fins
Longitudinal Fins
Transverse Fins
VI-200
Longitudinal Fins
0.70" Fin
(17,7 mm)
30775
VI-J00
Longitudinal Fins
Transverse Fins
0.90" Fin
(22,8 mm)
30191
Transverse Fins
Longitudinal Fins
Maxi Heat Sinks
1.45" Fin
(36,8 mm)
30780
Mini Heat Sinks
0.40" Fin
(10,1 mm)
30194
Transverse Fins
0.90" Fin
(22,8 mm)
30771
0.40" Fin
(10,1 mm)
30140
Micro Heat Sinks
Threaded
Through Hole
Threaded
Through Hole
Threaded
Through Hole
0.4" Fin
(10,1 mm)
30482
0.4" Fin
(10,1 mm)
30718
0.4" Fin
(10,1 mm)
32188
0.4" Fin
(10,1 mm)
30195
0.4" Fin
(10,1 mm)
32174
0.4" Fin
(10,1 mm)
30719
0.9" Fin
(22,8 mm)
30188
0.9" Fin
(22,8 mm)
30181
0.9" Fin
(22,8 mm)
30189
0.9" Fin
(22,8 mm)
30182
0.9" Fin
(22,8 mm)
30190
0.9" Fin
(22,8 mm)
30183
0.4" Fin
(10,1 mm)
30778
0.4" Fin
(10,1 mm)
30720
0.4" Fin
(10,1 mm)
30184
0.4" Fin
(10,1 mm)
30721
0.4" Fin
(10,1 mm)
32173
0.4" Fin
(10,1 mm)
30722
0.9" Fin
(22,8 mm)
30196
0.9" Fin
(22,8 mm)
30723
0.9" Fin
(22,8 mm)
30269
0.9" Fin
(22,8 mm)
30724
0.9" Fin
(22,8 mm)
30270
0.9" Fin
(22,8 mm)
30725
Low-profile side-fin heat sinks – Height
only 0.125" (3,1 mm) above module baseplate
V•I Chip Heat Sinks & Push-Pins
For use with PRM, VTM and BCM V•I Chip
Power Components
Heat Sink
Part Number
Push-Pins
(includes thermal interface)
Transverse Fins, 11 mm
Transverse Fins, 6.3 mm
Longitudinal Fins, 11 mm
Longitudinal Fins, 6.3 mm
48
0.70" Fin
(17,7 mm)
30193
Part Number
(incudes spring)
32438
32439
32440
32441
0.051" – 0.069" PCB
0.070" – 0.104" PCB
0.105" – 0.132" PCB
0.133" – 0.156" PCB
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
32434
32435
32436
32437
0.55" (13,9 mm)
Side Fins
30096
0.55" (13,9 mm)
Side Fins
32190
0.55" (13,9 mm)
Side Fins
30095
ACCESSORIES
Web ExpressCode: mounting2
Thermal Management
ThermMate™ Thermal Pads
For use with Vicor modules, ThermMate thermal pads are a “dry” alternative
to thermal compound and are pre-cut to the outline dimensions of the module.
Thermal Pad
VI-200 (10 pc. pkg.)
VI-J00 (10 pc. pkg.)
Part Number
20266
20267
Thickness
0.007" (0,17 mm)
0.007" (0,17 mm)
Maxi (10 pc. pkg.)
Mini (10 pc. pkg.)
Micro (10 pc. pkg.)
20263
20264
20265
0.007" (0,17 mm)
0.007" (0,17 mm)
0.007" (0,17 mm)
VI BRICK – PRM / VTM / BCM
Size “A” (10 pc. pkg.)
VI BRICK – DC-DC Converter
Size “B” (10 pc. pkg.)
34636
0.007" (0,17 mm)
34637
0.007" (0,17 mm)
20267
20266
20263
34637
20264
20265
34636
Grounding Clips
For use with FinMod and SlimMod packaging options (Page 23). Grounding clips
provide a convenient means for making electrical connection between the heat sink
assembly and the printed circuit board.
Use With...
F1 and F2
F3 and F4
SlimMods
32186
32187 [a]
Part Number
32185
32186
32187 [a]
32185
[a]
Web ExpressCode: standoffs
Mounting Standoffs
Module Standoffs
Standoffs and screws
For mechanical mounting of VI-200 and VI-J00 Series modules.
Also provides grounding of the module from the baseplate
to the printed circuit board. (Sold individually)
Bulk and single-module kits
compatible with all standard
mounting configurations.
Description
0.525" (13,3 mm) Long
0.25" (6,3 mm) Hex
Not RoHS compliant
Part Number
10692-01
Sockets
Sockets are available for all Vicor VI-200 and
VI-J00 modules and are intended for applications
requiring ease of module installation or removal.
Vicor modules have nine pins, seven of which are
0.040" and two are 0.080".
Pin Size
0.040" (1,01 mm)
0.080" (2,03 mm)
Finish
Electro-tin
Electro-tin
30075
30074
VIEW MECHANICAL DRAWINGS ONLINE!
v i c o r p o w e r. c o m
Part Number
30074
30075
Minimum order quantities may apply.
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
49
ACCESSORIES
Web ExpressCode: sockets
ModuMate Socket Maxi, Mini & Micro Series
SurfMate: Surface Mount Sockets [a]
Full brick (Maxi)
Half brick (Mini)
Quarter brick (Micro)
Board
Thickness
Mounting
Style
Input
Output
5 Sets
Input
Output
5 Sets
Input
Output
5 Sets
Use module
pin style [b]
All
Surface
mount
22100
22101
16017
22100
22102
16021
22103
22104
16025
S, F
1.
2.
3.
InMate: Through Hole Sockets [a]
All sockets are supplied on InMate headers to assure proper alignment during installation
Full brick (Maxi)
Half brick (Mini)
Quarter brick (Micro)
Use module
pin style [b]
Board
Thickness
Mounting
Style
Input
Output
5 Sets
Input
Output
5 Sets
Input
Output
5 Sets
Nominal
0.062"
Inboard
18374
18382
18362
18374
18384
18366
18376
18386
18370
S, F
Onboard
18378
18388
18364
18378
18390
18368
18380
18392
18372
N, G
Inboard
18375
18383
18363
18375
18385
18367
18377
18387
18371
S, F
Onboard
18379
18389
18365
18379
18391
18369
18381
18393
18373
N, G
Onboard
21539
21543
21510
21539
21544
21511
21540
21545
21512
N, G
(1,57 mm)
Min / Max
0.055" / 0.071"
(1,3 mm) (1,8 mm)
Nominal
0.094"
(2,38 mm)
Min / Max
0.084" / 0.104"
(2,1 mm) (2,64 mm)
Nominal
0.125"
(3,17 mm)
Min / Max
0.1125" / 0.1375"
(2,85 mm) (3,5 mm)
1.
[a]
[b]
2.
3.
4.
For individual input / output purchases, a 35-piece minimum (and multiples) applies to Maxis / Minis and a 40-piece minimum for Micros.
Page 15 for pin styles.
Module Exchange Tool
Used in facilitating the proper extraction of modules from InMate or SurfMate sockets.
Removal without using the Exchange Tool may cause damage to the sockets.
Description
Maxi Exchange Tool
Mini Exchange Tool
Micro Exchange Tool
50
Part Number
22827
22828
22829
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
22829
22827
22828
ACCESSORIES
Web ExpressCode: chokes
Magnetics
PR Bus Isolation Transformer
Inductor, Differential Mode, Input
Developed for isolation of PR Bus signal when used with Maxi, Mini, Micro
parallel configurations. Consult Vicor for applications instructions.
Inductance /
Winding
22 µH
1 mH
Part Number
29768
DC Current /
Resistance
12 A / 5.8 mΩ
4 A / 250 mΩ
Part Number
33206
36-00036
Inductors, Differential Mode
VI-HAM Line Filter
The VI-HAM requires an external line filter. When used in conjunction with
part number 30205, the VI-HAM / Filter combination will meet the
requirements of worldwide EMI standards.
Part Number
30205
Inductors, Common Mode
Output inductors may be used to reduce differential output noise by
approximately 20 dB.
Inductance
0.2 µH
27 µH
1.8 µH
DC Current (max.)
40 A
12 A
10 A
These inductors provide a high level of attenuation of common-mode currents.
Common Mode Output Inductors
Inductance /
Winding
1000 µH
3000 µH
2163 µH
1.3 mH
Inductance
420 µH
350 µH
1.27 mH
70 µH
110 µH
DC Current /
Resistance
12 A / 6.5 mΩ
7 A / 18 mΩ
1 A / 42 m (low profile)
13 A / 14 mΩ
Part Number
31743
31742
31943
32006
DC Current (max.)
20 A
40 A
10 A
80 A
60 A
Part Number
30268
32012
32497
Part Number
36-00037
36-00029-01
36-00029-04
36-00029-06
36-00029-07
Inductor, Output Sense Compensation
Inductance
1 mH
[a]
Part Number
36-00030 [a]
Not RoHS compliant
Web ExpressCode: caps
Capacitors
Capacitors, X-type
For filtering specifications of FCC Level A.
Description
“X” Cap., 0.68 µF
“X” Cap., 0.47 µF
“X” Cap., 0.33 µF
“X” Cap., 0.22 µF
“X” Cap., 0.15 µF
“X” Cap., 1.0 µF
Part Number
11217
03047
00927
04068
03269
02573
Capacitors, Y-type
Description
“Y” Cap., 1,500 pF
“Y” Cap., 4,700 pF
“Y” Cap., 0.01 µF
“Y” Cap., 0.022 µF
“Y” Cap., 4,700 pF
“Y” Cap., 1,500 pF
Components
MOVs
For use with front-end modules.
Description
275 V MOV, 14 mm Disc
68 V MOV, 10 mm Disc
120 V MOV, 10 mm Disc
200 V MOV, 10 mm Disc
220 V MOV, 10 mm Disc
Gas Discharge Tube
For EMI / RFI considerations.
SMT version
SMT version
Part Number
00770
01000
01501
03093
25283
30802
Web ExpressCode: comp
Part Number
13755
26107
Part Number
30076
30234-068
30234-120
30234-200
30234-220
For use with the ENMods and VI-ARM.
Spark Over (DC)
220 V
75 V
13755
Capacitors, Hold up
Product
VI-AIM
VI-HAM
FARM / ARM
Description
270 µF, 200 V
270 µF, 400 V
470 µF, 450 V
1,200 µF, 200 V
2,200 µF, 200 V
Part Number
30769
30240
30249
30275
30483
VIEW MECHANICAL DRAWINGS ONLINE!
v i c o r p o w e r. c o m
Minimum order quantities may apply.
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
51
ACCESSORIES
Connector Kits FlatPAC, FlatPAC-EN, LoPAC, MegaPAC & PFC FrontEnd products
Web ExpressCode: connects
All parts are RoHS compliant unless otherwise noted
FlatPAC Accessories
MegaPAC Accessories
Input and Output Retrofit Kits
Connector Kits
Description
Input connector
Output connector
Part Number
14136 [a]
14137 [a]
Input and Output Mating Connectors
Description
Input connector, 6 pin [b]
Output connector, 5 pin [b]
[a]
[b]
Part Number
33100
16385 [a]
Not RoHS compliant
Insertion tool for use with FlatPAC input / output connectors are
available from AMP, Inc., part number 58074-1.
Manual hand tool, part number 58246-1, interchangeable head.
Current Share Boards
Description
MegaPACs using VI-200
and VI-J00 Series modules
MegaPAC using Maxi modules
Part Number
19-130047
19-130044
Current Share Boards
Part Number
CSB01
Description
2 holes
3 holes
4 holes
5 holes
Series bus bar
CSB02
Part Number
88-00033-01
88-00033-02
88-00033-03
88-00033-04
88-00043
CSB02
FlatPAC-EN Accessories
PFC FrontEnd Accessories
Connector Kit
Description
Din Rail Mounting Kit
Connector Kit
VIPAC Array Adapter
Current Share Boards
52
Part Number
CSB01
Bus Bars
Connector Kits
Description
LoPACs using VI-200
and VI-J00 Series modules
LoPACs using Maxi, Mini
and Micro Series modules
Part Number
19-130040
19-130041
19-130042
96-00032-01
MegaPAC chassis and ConverterPACs can be purchased separately
for scalable systems and / or spares.
LoPAC Accessories
Description
PFC Mini
PFC Micro, PFC MicroS
Description
Single-phase input
Three-phase input
DualPAC / Dual QPAC output ConverterPacs
Air block
Part Number
19-130060
19-130059
19-130064
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
Description
FlatPAC-EN
FlatPAC-EN using VI-200
and VI-J00 Series modules
FlatPAC-EN using Maxi, Mini
and Micro Series modules
Part Number
19-130044
CSB01
CSB02
QUALITY
Technical Information
Web ExpressCode: qual
Quality System
We use the “Plan-Do-Check-Act" model (PDCA) to foster continuous
improvement. We focus on key performance metrics that are continuously
measured and reviewed. This enables us to be proactive in improving our
technology, our products, our processes, and our service to our customers.
Vicor’s Quality Process
Create
Quality Center Online
Custom Quality Reports
Explore Vicor’s quality systems through a robust library
of documentation, videos, and process charts.
Generate a report based on ISO 9001:2000 criteria
that entirely meets your specific requirements.
Get your report in PDF format with hyperlinks to
videos and other information of your choosing.
Download
Standard Quality Reports
Quality Library See and hear quality systems at work
White papers on specific quality issues
ISO 9001:2000 certificates
RoHS compliant information
Contact our quality team
RoHS
Browse
Experience Vicor’s
Quality Center
vicorquality.com
Play Video >
Play Video >>
Play Video >>
Play Video >>
Play Video >>
Play Video >
Play Video >>
Play Video >>
Play Video >>
Play Video >>
Technical Information
RoHS Compliance
Web ExpressCode: rohs
Vicor Corporation has a strong commitment to protecting our environment.
As an ISO 9001:2000 registered company and a member of the global
community, we are dedicated to meeting government regulations,
international standards, and our customers' requirements. To those ends, we
have developed and currently maintain Environmental Management Systems
(EMS) and the requisite controlled business, design, and manufacturing
processes to service our worldwide customer base.
ISO 9001:2000 Certified
Vicor is dedicated to developing and maintaining design and
manufacturing processes to competitively service our world-wide
customer base that meet government regulations, international
standards, and our customers requirements.
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
53
VICORPOWER.COM
Use the Power of the Web
Develop your power solution by going to vicorpower.com. It's one of the
premiere power-conversion sites on the web. Vicorpower.com is especially
designed to get you the information you need quickly. And, through Vicor's
unique mass-customization capabilities, we can provide you with exactly
the power specifications you want at a price that's always affordable.
Whether it's converters, user-configurable or custom power, Vicor has
the high-value solution.
Here’s what you’ll find on vicorpower.com
Design Guides and Application Notes
Data sheets and mechanical drawings for all Vicor products
PowerBench product configurators and a converter
simulator that specifically analyzes your best options
Technical seminars with synchronized video, PowerPoint, and
access to related resources
Webcasts on technical subjects of interest
Application demonstrations
Online Product & Military catalog with direct links to product pages,
data sheets, and mechanical drawings
Dedicated quality site with detailed factory tour and a custom
quality report generator
Technical articles that cover a huge range of applications challenges
MECHANICAL
DRAWINGS
vicorpower.com
Experience one of the premiere power
conversion sites on the web
DATA SHEETS
Feel free to contact Applications for any
technical questions you may have at
1-800-927-9474 or Customer Service for
price and delivery at 1-800-735-6200.
VIDEOS
For all other phone numbers, please
consult back cover.
CONFIGURATORS
54
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
QUALITY
CENTER
PowerBench™ Online Product Configurator Tools
Do-It-Yourself Power Design Custom Design Systems
PO
ERBENCH
Web ExpressCode: pwrb
Design your own DC-DC converter or configurable power supply –
online – anytime using Vicor's custom configurators. Designs that
you create are saved in your "My Designs" account for future review
and editing. You register only once to access all Vicor's custom
configurators via the "Single Sign-On" feature.
With Vicor's PowerBench Custom Module Design System you
can design your own DC-DC converters using our proprietary
simulator or using hundreds of predefined designs. You simply
specify design parameters such as input voltage range, output
voltage set point, output power, packaging, and environmental
options. A true expert system, our Custom Module Design System
generates a variety of valid designs, ranks them all, and selects
the optimum one. A unique part number, unit price, and delivery
schedule will be returned to you. You can even order online.
PowerBench’s VCAD™ is a patented system that enables users to
specify online, the design of Vicor's VIPAC family from available
input voltages, output configuration, thermal features, mechanical
configurations, and an optional power up / power down
sequencing feature.
SINGLE SIGN-ON
PowerBench’s VSPOC™ enables the registered user to specify and
verify complete AC-DC power supplies in real time. The system is
fully integrated with Westcor manufacturing operations. Once the
user approves the product configuration, a bill of materials is
generated and an order can be placed immediately.
Vicor is committed to meeting designers’ needs via mass customization.
All our manufacturing facilities have this capability. We'll support
you with the best applications group in the industry. Thousands of
designers worldwide have taken advantage of custom Vicor DC-DC
converters and power supplies designs. You can, too.
PO
ERBENCH
Custom Module
Design System
Design your own DC-DC converters
at vicorpower.com/powerbench
My Designs
An online tool for storing
the designs you create
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
55
SUPPORT
Applications
Locations Around The World
Web ExpressCode: support1
Vicor understands that technical support is critical to our customers. As a result, the Vicor Applications Engineering staff is comprised
of technically competent, highly experienced field applications engineers who provide our customers with detailed technical support
— within 24 hours — anywhere in the world. Our Applications Engineers, each with a thoroughly equipped lab, are established in
locations across the globe ready to assist you in the pursuit of the optimum power solution.
Specifically, Vicor Field Applications Engineers offer:
Evaluation and recommendation on specific customer design issues backed by a team of factory based
Product Line Engineers.
Answers to your technical questions by phone, fax, email, or via the Vicor website.
Assistance with component-based power system design and power architecture assessment.
Support for user needs through visits to your facility or at the FAE’s lab.
Technical presentations / seminars, both scheduled and on demand, at your site or elsewhere.
A comprehensive library of up-to-date design guides, application notes, and technical articles easily accessible
on the Vicor website.
This highly skilled team – assembled to include a wide range of engineering experience – has helped users develop component
power solutions for thousands of applications in nearly every market segment.
Contact the Vicor Applications Group and experience Vicor's special commitment to your design. There’s one goal at Vicor: to help
you optimize your power design quickly and affordably. Our worldwide applications engineering staff is ready to give you technical
support — NOW!
We can easily be reached by telephone or email, in North America at 800-927-9474, in Europe at 00 800 8426 7000
or in Asia at +852-2956-1782 and by email: [email protected].
56
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
MIL-COTS
V•I Chips
Web ExpressCode: mvichips
DC-DC V•I Chip Modules 28 V Regulator, Voltage Transformer, & Bus Converter
VTMs put isolated current multiplication and voltage division directly at the point of
load (POL), and an upstream PRM (Regulator) controls the factorized bus voltage
supplied to the VTM to provide line and load regulation. Together, the PRM and VTM
chip set provides the full functionality of a DC-DC converter, but with breakthrough
performance and flexibility in a rugged, miniature package. The BCM (Bus Converter
Module) functions as a fixed-ratio DC-DC transformer and provides an isolated bus
voltage to power the PRM and VTM chip set or other loads.
The MIL-COTS PRM operates from a wide input range of 16 – 50 Vdc, meeting many
of the ground vehicle and airborne requirements of MIL–STD–1275 and MIL–STD–
704. Rated for 120 W, the 28 V PRM produces a nominal factorized bus voltage of
36 Vdc, controllable over the range of 26 – 50 Vdc. The downstream isolated VTM is
available with twelve voltage division ratios from 1:1 to 1:32 and provides the user
with flexibility to supply up to 100 A or 120 W at any output voltage from 1 – 50 Vdc
in a surface-mount package occupying only 1 in2. The MIL-COTS BCM is a high
efficiency Sine Amplitude Converter (SAC) operating from a 240 to 330 Vdc primary
bus to deliver an isolated 30 – 41.2 V nominal, unregulated secondary.
Features for PRM
Input range: 16 – 50 Vdc
1.3 MHz switching frequency
Efficiency: 95%
–55°C to +125°C operation (Tj)
ZVS buck-boost regulator
Features for VTM
Isolated 1–50 Vdc output
1 µs transient response
3 MHz switching frequency
Efficiency: Up to 96.5%
–55 to +125°C operation (Tj)
Features for BCM
Input range: 240 – 330 Vdc
Output range: 30.0 – 41.2 Vdc
MIL-STD-704E/F Compliant
Efficiency: >95%
–55 to +125°C operation (Tj)
MIL-COTS VI BRICKs PRM / VTM Thermally Enhanced Package
Web ExpressCode: mvib
The PRM Regulator Module is a very efficient non-isolated
regulator specifically designed to provide a controlled Factorized
Bus distribution voltage for powering downstream VI BRICK
Voltage Transformation Modules. In combination, VI BRICK PRMs
and VTMs form a complete DC-DC converter subsystem offering
all of the unique benefits of Vicor’s Factorized Power
Architecture (FPA): high density and efficiency;
low noise operation; architectural flexibility;
extremely fast transient response;
elimination of bulk capacitance at
the point of load (POL); in a thermally
enhanced package.
The thermally enhanced VTM voltage transformer excels
at speed, density and efficiency to meet the demands of
advanced power applications. Combined with the PRM
regulator they create a DC-DC converter with flexibility to
provide isolation and regulation where needed. The PRM
can be located with the VTM at the
point of load or remotely in the back
plane or on a daughtercard.
MQPI-18 Input EMI Filter
MIL-COTS Product Catalog
The MQPI-18 is a surface mount DC front-end
filter that provides EMI filtering for Vicor’s 28 V
DC-DC V•I Chip or VI BRICK modules. The
MQPI-18 enables designers to meet conducted
emission / conducted susceptibility per MILSTD-461E. The MQPI-18 accepts an input
voltage of 10 – 80 Vdc and delivers output
current up to 7 A.
This document provides in-depth information on Vicor's line of
MIL-COTS standard products, including DC-DC converters,
custom solutions, and technical support.
34
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
Environmental stress screening and MTBF
Environmental qualification
Custom configured modules
Field tested... proven reliability
Visit vicorpower.com
to view the Military Catalog online.
This will give you instant access to all
technical documentation for a
MIL-COTS product.
SUPPORT
Customer Support Specialists
Ready to assist with all your power needs
Web ExpressCode: support
Our worldwide staff of customer support representatives and applications
engineers is at your service to assist in determining the most appropriate
power solutions for your system and to assure the quickest delivery of
prototype quantities.
Customer Support Representative can:
Provide price and delivery information
Help select the most appropriate product for your application
Arrange a visit to your site by a Vicor applications engineer or
sales representative
Fulfill literature requests
Process purchase order requirements
Provide order status information.
Vicor accepts VISA, MasterCard, American Express, a bank check or money
order; an open account with established credit, or COD. Most products are
covered by a two–year limited warranty. See vicorpower.com for Vicor’s
terms and conditions along with our complete warranty statement.
F.O.B. Andover, Massachusetts, and Sunnyvale, California. For international
pricing, please contact your local Vicor office or distributor.
Let us help you find the right solution. With offices around the world, Vicor
is eager to help you meet your power needs. Our highly trained sales staff
can help you find a solution that’s right for your business.
Call us today. In North America call 1-800-735-6200.
In Europe call 00-800-8426-7000.
U.S. & CANADA: 800-735-6200 VICORPOWER.COM
Consult back cover for a complete list of contacts.
57
USA
Europe
vicorpower.com
vicoreurope.com
Vicor Corporation
(Corporate Headquarters)
25 Frontage Road
Andover, MA 01810-5413
Vicor France
Tel: +33 1 34 52 18 30
France: 0800 419 419
Benelux: 00 800 419 419 20
Fax: +33 1 34 52 28 30
Email: [email protected]
For General Information
Tel: 978-470-2900
Fax: 978-475-6715
For Technical Support
Tel: 800-927-9474
Fax: 978-749-3341
Email: [email protected]
For Sales Support
In U.S. & Canada: 800-735-6200
Fax: 978-475-6715
Email: [email protected]
Vicor Corporation
Lombard, IL
Tel: 630-769-8780
Fax: 630-769-8782
Vicor, Westcor Division
Sunnyvale, CA
Tel: 408-522-5280
Fax: 408-774-5555
westcorpower.com
Vicor Germany
Tel: +49 89 962 439 0
Germany: 0800 018 29 18
Denmark: 00800 8426 7000
Austria: 0800 20 37 27
Fax: +49 89 962 439 39
Email: [email protected]
Vicor Italy
Tel: +39 02 22 47 23 26
800 899 677
Fax: +39 02 22 47 31 66
Email: [email protected]
Vicor UK
Tel: +44 1276 678222
UK: 0800 980 8427
Sweden: 020 794 143
Fax: +44 1276 681269
Email: [email protected]
Asia-Pacific
Picor Corporation
Slatersville, RI
Tel: 401-235-1100
Fax: 401-235-1117
picorpower.com
Vicor Japan Co., Ltd.
Tel: +81-3-5487-3880
Fax: +81-3-5487-3885
vicorpower.jp
Vicor Hong Kong
Tel: +852-2956-1782
Fax: +852-2956-0782
vicor-asia.com
In Latin America:
Argentina: 800-555-4288
Brazil: 0800-890-0288
Mexico: 011 52 333 647 7881
Vicor Custom
Vicor Custom Technical Support
Tel: 800-496-5570
Aegis Power Systems
Murphy, NC
Tel: 828-837-4029
Fax: 828-837-4106
Email: [email protected]
aegispower.com
Convertec Corporation
Roseville, Minnesota
Tel: 651-604-0289
Fax: 651-604-0293
Email: [email protected]
Freedom Power Systems
Cedar Park, TX
Tel: 512-259-0941
Fax: 512-259-4438
Email: [email protected]
freedompower.com
Granite Power Technologies
Manchester, NH
Tel: 603-623-3222
Fax: 603-627-3222
Email: [email protected]
granitepower.com
Mission Power Solutions
Oceanside, CA
Tel: 760-631-6846
Fax: 760-631-6972
Email: [email protected]
mpwrs.com
Northwest Power Integrations
Milwaukie, OR
Tel: 503-652-6161
Fax: 503-652-6868
Email: [email protected]
npi-inc.com
Ask the operator to connect
you to: 800-735-6200.
© Vicor Corporation 2009
Printed in USA, 34653, Rev 2.1 7/09