UNISONIC TECHNOLOGIES CO., LTD MBR10200C DIODE SCHOTTKY BARRIER RECTIFIER FEATURES * 10 amps total (5 amps per diode leg) * Guard ring for transient protection * Low forward voltage drop * High surge capability * Low power loss/High efficiency SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MBR10200CL-TA3-T MBR10200CG-TA3-T MBR10200CL-TF3-T MBR10200CG-TF3-T MBR10200CL-TF1-T MBR10200CG-TF1-T MBR10200CL-TQ2-T MBR10200CG-TQ2-T MBR10200CL-TQ2-R MBR10200CG-TQ2-R Note: Pin Assignment: A: Anode K: Cathode MBR10200CL-TA3-T TO-220 TO-220F TO-220F1 TO-263 TO-263 Pin Assignment 1 2 3 A K A A K A A K A A K A A K A Packing Tube Tube Tube Tube Tape Reel (1) T: Tube, R: Tape Reel (1)Packing Type (2)Package Type (3)Green Package Package (2) TA3: TO-220, TF3: TO-220F, TF1: TO-220F1 TQ2: TO-263 (3) L: Lead Free, G: Halogen Free and Lead Free MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-185.D MBR10200C DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER Maximum Repetitive Peak Reverse Voltage Maximum non-repetitive Peak Reverse Voltage Maximum DC Blocking Voltage Average Forward Rectified Output Per Leg Current Total Non-Repetitive Peak Forward Surge Current 8.3ms Single Half-Sine-Wave Junction Capacitance (Note 4) Operating Temperature Storage Temperature RATINGS 200 200 200 5 10 UNIT V V V A A IFSM 150 A CJ TJ TSTG 300 -65 ~ +150 -65 ~ +150 pF °C °C IO THERMAL DATA PARAMETER SYMBOL θJA Junction to Ambient Junction to Case SYMBOL VRRM VRM VR TO-220/TO-263 TO-220F/TO-220F1 θJC RATINGS 60 2 4 UNIT °С/W °С/W °С/W ELECTRICAL CHARACTERISTICS (Note 3) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT IF=5A, TC=25°C 0.95 V IF=5A, TC=125°C 0.85 V Instantaneous Forward Voltage Drop VF IF=10A, TC=25°C 1 V IF=10A, TC=125°C 0.95 V Rated DC Voltage, TC=25°C 500 μA Instantaneous Reverse Current IR Rated DC Voltage, TC=125°C 20 mA Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. 2.0μs Pulse Width, f = 1.0KHz. 3. Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2.0%. 4. Applied VR = 4.0V and f = 1.0MHz. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R601-185.D MBR10200C DIODE TYPICAL CHARACTERISTICS Typical Forward Characteristics Forward Derating Curve 100 Instantaneous Forward Current (A) Average Rectified Current (A) 7 6 5 4 3 2 1 0 0 25 50 75 100 125 150 175 Case Temperature (°C) 25°C 10 1.0 IF Pulse Width=300uS 0.1 0.4 0.6 0.8 1.2 1.0 Instantaneous Forward Voltage (V) Typical Reverse Characteristics Instantaneous Reverse Current (A) 1E-2 1E-3 1E-4 1E-5 1E-6 1E-7 1E-8 VR=200V 25 50 75 100 125 150 Case Temperature (°C) UTC assum es no responsibility for equipm ent failures that result from using products at v alues that exceed, ev en m om entarily, rated v alues (such as m axim um ratings, operating condition ranges, or other param eters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or system s where m alfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The inform ation presented in this docum ent does not form part of any quotation or contract, is believ ed to be accurate and reliable and m ay be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-185.D