E-Series RF 1:1 Transformer — 4.5 - 2000 MHz ETN1-1-13 ETN1-1-13 E-Series RF 1:1 Transformer 4.5 - 2000 MHz Features • • • SM-52 Package Surface Mount 1:1 Impedance Ratio Available on Tape & Reel Description M/A-COM’s ETN1-1-13 is a 1:1 RF transformer in a low cost, surface mount package. Ideally suited for high volume applications. Schematic Electrical Specifications @25°C Parameter Units Nominal Maximum Mean (x) Sigma (σ) MHz — — — — Insertion Loss (fL - fU) 4.5 - 1000 MHz 1000 - 2000 MHz dB dB — — 1.0 2.0 0.32 — 0.036 — Amplitude Unbalance 4.5 - 1000 MHz dB — 1.0 — — Degrees — 20 — — Frequency Range 4.5 - 2000 Phase Unbalance 4.5 - 1000 MHz Note: Mean and Sigma calculated from average loss at @ (fU-fL)/2+ fL Please Note that the photograph above indicates typical package only, not actual unit. V1.00 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. S 1455 • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make E-Series RF 1:1 Transformer — 4.5 - 2000 MHz ETN1-1-13 Functional Configuration Absolute Maximum Ratings Parameter Absolute Maximum Function Pin No. RF Power 250 mW Secondary Dot 1 DC Current 30 mA Center Tap - Operating/Storage Temperature -40°C to +85°C Secondary 3 Primary 4 Not Connected 2,5 Primary Dot 6 Typical Performance @ +25°C Insertion Loss Amplitude Unbalance Phase Unbalance V1.00 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. S 1455 • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make