here

QCM922A(QCM system)
The successor of QCA922
high speed & high sensitivity QCM
QCM922A is the successor of QCA922 and can be simultaneously measured a
small mass change as resonance frequency and the viscoelastic change as
resonance resistance and is corresponding to the measurement of the frequency
characteristics of admittance. QCM922A is capable of high sensitivity of up to
30MHz and high-speed of up to 10msec.
Application examples
•Measurement of biopolymer interactions, such as protein
•Real-time monitoring of the formation of high molecular and decomposition
•Evaluation of a lithium ion secondary battery with EQCM
•Gas analysis, such as humidity and smell substance
•Quantitative evaluation of the detergency in surfactant
•Film thickness measurement in the plating
•Analysis of structural change by the measurement of the frequency characteristics of
the admittance
Example of QCM922A System Configuration
Flow Cell system
QCM922A-020, QA-CL6/ CL6PK/ CL7
PC, WinQCM, Peristaltic pump
EQCM system
QCM922A-EQCMBASE, PC, Potentiostat/Galvaostat
BNC cable, Stand, Lab jack
Specification
□QCM922A-020: Main unit
Item
Description
Simultaneously Resonance frequency &
Measuring item
resistance or Admittance frequency
characteristics
Resonance
Resolution: 0.01 Hz
frequency
Range: 5 MHz to 30 MHz
Resonance
Resolution: 0.01 Ω
resistance
Range: 1 Ω to 10 kΩ
Admittance
frequency
Frequency range: 4 MHz to 30 MHz
characteristics
Range: ±10 V(14bit)
ΔF analog output
Scale: ±100 Hz to ±500 kHz
Range: ±10 V(14bit)
ΔR analog output
Scale: ±10 Ω to ±10 kΩ
Analog input
2ch, Range: ±3, 6, 12 V(14bit)
Gate time
10 ms/ 20 ms/ 100 ms/ 1 s/ 10 s
Display
20 characters 4 lines OLED
Interface
USB 2.0
Input power source AC 100 to 240 V, 50/60 Hz
Power consumption Max. 25 VA
Dimensions
162 x 160 x 95 (WxDxH)[mm] *
Weight
Approx. 1.3 kg
Operation
environmental
5℃ to 40 ℃(non-condensing)
temperature
Compliant
CE marking (EMC, low-voltage directive)
standards
QCM922A-020 contains main unit and QCM922A-100
□QCM922A-100: QA-CL Adapter Cable
Item
Description
Material
Case:PVDF
Connector:LEMO® plug(Male)
Connection cable
Cable:Coaxial multi cable:about 1.0 m
Connected to the working electrode of
Potentiostat/Galvanostat internally
Working(W)
connected through a low pass filter and a
terminal
measurement electrode surface of the
quartz resonator
Dimensions
24 x 40 x 15 (WxDxH)[mm]*
Weight
Approx. 130 g(including cable)
Operation
environmental
5℃ to 40 ℃(non-condensing)
temperature
□9MHz AT-Cut Quartz Crystal Resonator QA-A9M-series
Item
Description
Au, Pt, Ag, Al, C, Cu, ITO, Mo, Ni, Si, SiO2,
SUS304, Ti, etc.
Electrode material
300nm of electrode material is sputtered
onto a Ti film groundwork
Electrode area
5mmφ
□Dip Cell: QA-CL3
Item
Material
Dimensions
Usage
Description
Main body: PTFE, PVDF
O-ring: Viton®
25.5 x 20 x 12 (WxDxH)[mm]*
Solution or air
□Well Cell: QA-CL4/ QA-CL4PK
Item
Description
Main body: PTFE, PVDF(QA-CL4)
Material
PEEK(QA-CL4PK)
O-ring: Viton®
Dimensions
25.5 x 20 x 12 (WxDxH)[mm]*
Capacity
Max. 750μl
Cell is filled with solution or CL4 and CL4PK
Usage
are connected with RG100(Cell of EQCM)
□Well Cell: QA-CL5
Item
Description
Main body: VC
Material
O-ring: Viton®
Dimensions
25.5 x 20 x 12 (WxDxH)[mm]*
Capacity
Max. 250μl
Usage
Cell is filled with solution
□Flow Cell: QA-CL6/ QA-CL6PK/ QA-CL7
Item
Description
Main body: PTFE, PVDF(CL6)/
Material
PEEK(CL6PK)/ VC(CL7)
O-ring: Viton®
Dimensions
28.0 x 20 x 12 (WxDxH)[mm]*
Capacity
90μl
Usage
Cell is flowed with solution by the pump
* without a projection part
Product names in this paper are trademarks or registered trademarks.
The specification is subject to change without notice. Please be forewarned.
SEIKO EG&G CO.,LTD.
Grande Bldgs., 2-26-9, Hatchobori,
Chuo-ku, Tokyo 104-0032, Japan
TEL:(+81)3-5543-3106
FAX:(+81)3-5542-3109
http://www.sii.co.jp/segg
July 2015 Rev. 1.3