Product Brief Small Signal 100V MOSFETs in TSOP-6 Space Saving Package for Fast Switching Applications Infineon has launched 4 new Small Signal MOSFETs in the TSOP-6 package: 3 new 100V and 1 new 75V part. These are new space saving package versions of industry standard devices in the respective RDS(on) class. The low Qg and low thermal resistance make them ideally suitable for a wide variety of applications including LED Lighting, SMPS and Motor Control. All products are qualified to AEC Q101, making them suitable for Automotive applications such as ABS and Body Control Unit (BCU) and all applications demanding the highest levels of quality. Key Features Logic level rated with low Qg Avalanche rated Qualified to AEC Q101 RoHS and halogen free Key Benefits Fast switching Space saving TSOP-6 package Easy interface to 4.5V MCU Suitable for Automotive and high quality requirement applications Applications Primary Side 24V and 48V Systems Synchronous Rectification LED Lighting Product Portfolio Small Signal 75V and 100V TSOP-6 Motor Control Product VDS [V] RDS(on) @VGS=10V [mΩ] ID(max) [A] VGS(th) [V] QG(th) [nC] RthJA* K/W BSL716SN 75 150 2.5 0.8…1.8 13.1 62.5 BSL296SN 100 460 1.4 0.8…1.9 13.1 62.5 BSL372SN 100 220 2.0 0.8...1.8 14.3 62.5 BSL373SN 100 230 2.0 2.1...4.0 9.3 62.5 * Device on 40mm x 40mm x 1.5mm epoxy PCB FR4 with 6cm² (one layer 70µm thick) copper area for drain connection. PCB is vertical in still air (t < 5s). www.infineon.com/smallsignal Automotive ABS Automotive Body Control Units Product Brief Small Signal 100V MOSFETs in TSOP-6 Space Saving Package for Fast Switching Applications Power Dissipation Limits The first thermal performance parameter that is normally considered is RthJA (junction to ambient thermal resistance). RthJA for TSOP-6 is 62.5K/W* for half the size of SOT-223. A comparison of the singlepulse power curves reveals the difference in the thermal performance of TSOP-6 and SOT-223 and the ability of these two packages to handle surge currents. The graph shows the power dissipation curves for each package. For above 10s the curves show the limitations of the PCB. Below 10ms the curves reflect the limitations of the chip size. TSOP-6 can dissipate a 3.4W pulse for a duration of 1.26s. 20 18 16 Power [W] 14 5.3 3.4 12 10 8 6 4 2 0 0.01 0.1 Time [s] TSOP-6 1.0 1.26 10 * Device on 40mm x 40mm x 1.5mm epoxy PCB FR4 with 6cm² (one layer 70µm thick) copper area for drain connection. PCB is vertical in still air (t < 5s). SOT-223 Package Information TSOP-6 Package Outline B 6 5 4 1 2 3 0.5 0.35 +0.1 -0.05 0.95 1.9 0.2 M 2.9 (0.35) 2.9 ±0.2 (2.25) Footprint 1.9 TSOP-6 B 6x 0.95 1.1 MAX. 0.15 +0.1 -0.06 0.2 Published by Infineon Technologies Austria AG 9500 Villach, Austria © 2015 Infineon Technologies AG. All Rights Reserved. Visit us: www.infineon.com Order Number: B111-I0003-V1-7600-AP-EC Date: 01 / 2015 M 1.6 ±0.1 10° MAX. 0.25 ±0.1 10° MAX. 2.5 ±0.1 0.1 MAX. Note: Wave soldering possible depending on customers' process conditions A A Attention please! The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.